OneUp Aluminium Pedal Quick Service | Maintenance TUTORIAL step-by-step 🛠️

In this video i will show you how i did the quick service of my OneUp aluminium pedals. This will cover only the cleaning and greasing of the pedal without the bushing or bearing substitutions. Happy maintenance, happy watching, leave a like and please subscribe to the channel for free to not lose future contents! Enjoy!
#oneup #pedal #service
SUBSCRIBE HERE 😉: bit.ly/3hwWxrP
Check my amazon shop: www.amazon.de/...
Tools🔧
Pliers
Crescent Wrench
Shimano Cassette tool: amzn.to/3FGywYt or amzn.to/3oT8r1x
Looking for inspiration?: amzn.to/3l1BJK6
Products🚲
Waterproof grease: amzn.to/3DOZ0qb
Paper Towels
Registered with Gopro Hero 8 @4K 60FPS, FOV Linear, ISO MAX 1600, Hypersmooth/Video Stabilization on ON, tripod.
➡ If you liked the video, please leave a like and subscribe! 👊🏻
➡ If you have any suggestion on how i can improve my riding skills or my channel (there is no chance for my English, sorry!), please leave a comment! 👊🏻
➡ If you know an area that i did not cover in my vlogs, please let me know! 👊🏻
OneUp Aluminium Pedal Quick Service
Maintenance TUTORIAL step-by-step 🛠️

[@tekjim]

more service tutorials should be like this. straight to the point without a whole life story, clear explanation and video. thanks

[@OresteCiotoli]

Thanks for the feedback, really appreciated! 💯

[@andrewwiedl7808]

Video was great. He covered exactly what i needed to service the bearings and pedal shaft on my One Up aluminium pedals. Straight to the point and did not waste my time w/ useless knowledge I did not need. Good on ya snowft86. Side note, those pedals I just put on my bike days ago now and I absolutely dig these. Great large platform to place feet with outstanding pins to keep you there. The bright green aluminium looks absolutely amazing with all the other upgrades I have thrown on my '17 Giant Trance. Now all I need is to get my Yeti SB 145 turquoise blue carbon frame and attach the Fox Factory Float DPX2 as well as the Factory 38 GRIP2 with all the other amazing goodies I have acquired recently. Yeah!!! Excuse me as I digress...

[@OresteCiotoli]

Ehi Andrew thanks a lot, in the tutorial i tried to do my best to keep it short, but this requires scripting (i wrote down what to say and then i record only the audio)! Wow great build ahead...nice toys!

[@cabotbroughton7458]

Nice video, I decided to remove the brass bushing so I could clean and put new grease in. I found that the bearing retainer and the screw retaining the bushing are the opposite hand thread to the pedal to arm thread and this is relatively easy to remember

[@OresteCiotoli]

Thanks man, and good job! Yes if you remove that bushing, is exactly how you said 👌🏻

[@Skizm_admin]

Brilliant video, all the info I needed, thank you.

[@OresteCiotoli]

You are welcome! 👊🏻🤝🏻

[@npc444]

straight to the point ! thanks for the help

[@OresteCiotoli]

thanks for watching, you are welcome! ;)

[@ckMTB]

Thanks for that Oreste, great video buddy👌

[@OresteCiotoli]

Thanks Christoph! 🤝🏻💯

[@sacco6274]

Great video. Thank you as I just purchased these pedals

[@OresteCiotoli]

Thanks man, you are welcome 👊🏻

[@SoGoMTB]

Thanks for the tips!

[@OresteCiotoli]

You are welcome man 👊🏻

[@V3BNR]

😯😯 merci pour ce tuto super intéressant.

[@OresteCiotoli]

You are welcome 😁🤝🏻

[@CoderShare]

Finally doing mine after 1600 miles. Let's just say they're pretty damn dry.

[@OresteCiotoli]

ahahah i can imagine! 🤣👍👌

[@mtbville]

Cool 😃👍

[@OresteCiotoli]

🤝🏻👌🏻👌🏻👌🏻

[@gen-X-trader]

I almost feel like you should add the word rebuild to your title to make it easy to find. This video shows exactly how to install a new bearing kit as well

[@OresteCiotoli]

I will🤘🏻, thanks for the tip!

[@omarrafik2422]

bearing is seized onto axle. can not get it off. :(

[@OresteCiotoli]

i will try to heat the bearing to get it off, but not the axle. Probably not an easy task!

[@omarrafik2422]

@@OresteCiotoli I used a nail punch and hammer while the axle was fixed in a vice. worked great! thx :D

[@Chromedome-ss6mg]

There is no reason to grease the axle spindle. It doesn't contact the pedal. The bushings are the only thing that needs grease.

[@OresteCiotoli]

I found the grease all around the axle, that's why I did 😁

[@lucated65]

@@OresteCiotoli You did the right thing. As also stated by OneUp you have to "Grease all the outer surfaces of your axle (8). It is most important to grease the silver surfaces where the bearing (2) and bushing (10) sit". Maybe, you should have used less grease on the axle.

[@OresteCiotoli]

@@lucated65 i will definitely use less in the next time 👌🏻

[@davidmurphy9151]

@@lucated65 One up specifies to use a lot of grease - the excess is supposed to squeeze out.

[@IVANMTB]

Hi friend! good video and thanks for sharing🤟greetings🙋 #ivan_mtb

[@OresteCiotoli]

You are welcome Ivan😎 thank you for watching 👊🏻🤝🏻