Unboxing my Freshly Rebuilt & Ported Eaton Supercharger for my SVT Lightning
Вставка
- Опубліковано 3 жов 2024
- In this video, my son and I unbox and inspect my freshly rebuilt, ported, and painted Eaton M112 Supercharger. My old supercharger was toast so I sent another core to Jokerz Performance. After a short period, it has arrived back and is ready for the street.
#Jokerz #Eaton #svtlightning
Fantastic they did mind as well awesome 👌 work they do
Ya it turned out nice. This will be my second one.
Awesome !
More to come!
Hey man I have a pretty noobish question. I have an 03 that I have been kind of bringing back to life with some modern updates but I'm leaving it stock for the most part. I think I'm having blower belt slippage I have noticed when I'm at wot the truck doesn't miss like a sputter but it seems to have a lag and then picks back up again if that makes sense but I don't here anything slipping does that sound like I'm right? I did just order a snub kit and all of my tensioner and belts are new as well, just looking for another's opinion when you have time.
Does the boost lay over? I would kind of doubt it. It could be a handful of different things to be honest. Sorry I can't be more help.
@605BOLT I have a test run video I made last night filning the cluster if I could somehow show you, you can hear it lag about 2 secs after i hit it.
@@605BOLT just sent a request and video thanks for your time man
How much did jokers charge for all the work they did on your supercharger
Bout 1500 for port, rebuild and paint.
With what did you plugged the silencers? And will it hold up in the long run?
For this specific blower, i didn't actually plug them. Most use some sort of epoxy. I would not prefer to do it if I had my choice. This blower I purchased used with it done already but I don't think its necessary or even a good mod. I had Jokerz check it out and he said it all looks good so I just left it in.
Meaning, more clearly, yes this blower has plugged ports but no I didn't actually do the work. 👍
NICE‼️ARE U DROPPING PULLEY SIZE OR STAYING STOCK
Stock lightning upper pulley but it has a +8 lb lower pulley. Bout 8 inches across if I had to guess. So it will be overspun a touch.
@@605BOLT YEAH IF THAT'S AN OVERDRIVE LOWER PULLEY LIKE 5% THAN THAT'LL BE EQUIVALENT TO LIKE A .1"-.3" PULLEY DROP
The lightning world doesn't ever talk % overdrive. Idk why they don't but I wish they would because almost every other supercharged community says percent overdrive.
@@605BOLT 🤣
Your cute helper made an appearance! 😍
He's a good boy.
How long did jokerz take for turnaround time?
Don't remember. I would guess less than a month. For the record I would not use his services. Spoiler alert this blower is already dead. Might not be him. Might be the blower but if you are planning on spinning an Eaton real hard I would advise getting a bigger, better blower.
@@605BOLTwhat were you running when that happened?
@@sebas.6986 It developed a sound right away last summer that jokerz said was normal. Ran about another 1000 miles since. Maybe not even that and now it sounds terrible. Must be metal on metal in there by ear. Haven't removed it yet to know for sure. But it will be a lot of the same work over again. Very disappointing and why I suggest going a different route. This will be the second full tilt max effort jokerz blower that I have killed. He has enough of my money.
This setup is the setup I ran against the electric lightning truck if you check that video. Actually had to trailer my truck to the track in fear the blower would quit on the trip up there. 12.90 or something I think is my PB on this setup. The slips might be in the video. I don't recall for sure.
Dope🔥🔥
Excited to get my truck back. Sucks when they're down.