02 FORD F250 | REAR DOOR DONT OPEN | EASY FIX
Вставка
- Опубліковано 5 вер 2024
- #OURCABININTHEWOODS #FORDF250
02 FORD F250 | REAR DOOR DONT OPEN | EASY FIX
Had a broken cable mounting end. install new kit to repair ends.
Thanks everyone and please be safe.
Thank you everyone for you support.
TROY-BILT GENERATER 5500 WATTS, 8250 STARTING WATTS.
We use a 18' TRAILER
KUBOTA TRACTOR L2350 WITH LOADER
/ ourcabininthewoods
Our cabin In The woods P.O. Box 716 Luther, Ok 73054.
Email ourcabininthewoods9@yahoo.com.
Hello welcome to Our Cabin In The Woods. Our story really started in 2013. We talked about being more self-relient. So we started looking for property. We found this 10 acres fully wooded oak property. Our kids have all moved on and have the own family's. We sold our log home. 6-20-2015 is when we moved into our camper on the property lived in it for 9 months while building our new 1600sq ft log home.
We have egg laying chickens, meat chickens, turkeys, pigs, and goats.
We also have five real nice gardens.
Please follow us on our modern homesteading journey. You will see more building, gardening, animals stuff and canning. We hope you enjoy our videos, Please share and subscribe and always hit the thumbs up button. Have any question or comments please ask.
O ya can't forget the star of the channel WILLOW our Siberian Husky. She love going for rides and talks alot. Thanks to everyone.
Canon Vixia HF R800 camera.
Vidpro Microphone
Created with Wondershare 9
Great video. Thank you
👍
Excellent 👍👌
@@johnnyeason7200 glad it helped
Appreciate all the camera work in such a tight area. Really helped.
Cool glad it helped you out thanks for watching
Having the same problem, but, rear doors won’t open, I might just get two boxes of the Doorman clips and do both sides of the cable on both doors so I won’t have to deal with it anymore
Thank you Sir, very clear words and good camera angles. My 2004 F250 right small door bottom latch fails, ordered 8 tips for complete repair. Your vid is very helpful.
Glad it helped
Can you post the links for the parts you ordered
Thank you!
Yup know problem Good luck
I tried to put Amazon link to the parts! UA-cam deleted them...oh well.
I'm excited as I have two trucks with these problems! Hopefully I can figure it out. Parts were like $6 for 4 of the pieces needed. 56% lower than normal! Got two packs coming! Thanks again
@@OurCabinInThewoods thanks man!
Not sure why the other videos want you to replace the cables!
@@lsizemo I don't know but this fixes the problem and mine still work great.
You absolute genius! I need to get my rear doors open, and I didn't even think about taking the latches loose instead of trying to get the frickin cables to do the work while the doors are shut!
Great video!!!!! very useful as both of my crew cab doors don't open!!! Thank you!!!!!
Glad it helped!
Well thank you sir, well described. The only video showing the repair ends and the fix. My 2006 doors failed within 2 weeks of each other.
@@glcoulson thanks for watching.
Good teacher
Thank you! 😃
In my case just the cable going up is bad I think can I fix with cable brake bicicle i will try that’s another idea
@@williamcarballo6658 good luck
Can you explain how open de mirror f250 99 left and right side
Thank God I watched this video first and it saved me a lot of time and money . This is the only video that directs you to the dorman repair kit that worked like a charm
Cool glad it helped you out. Thanks for the comment
Ok this was 2 years ago - but do you remember what size the torx bolts were? Thought that they were size 40 - however I managed to strip both torx heads.
I think it was a T40. If the head is stripped out hit the face of it a few times with a hammer and retry again.
Thanks for the video. All the vendors state that the Dorman 926-111 kit will not fit my 2007 F-250 superduty extended cab, but it fit my truck just fine, and was very easy to install.
Thanks for the info and glad it all went good.
Thank you very much for this video, it really helped out.
Had both rear doors fail within a month of each other.
NP
Excellent instructions. I just repaired mine using your ivideo.
Good deal
Very great video! You done us half door guys a service! Thank you much!
Thanks for watching.
In the door views were very, very helpfull. Thank you.
Glad it was helpful!
Just what I needed! Got a 2000 f 250 I’m fixing up and the back door won’t open. I tried to do the work while in the back seat and just no way while it’s over 100 degrees! Going to go get the kit to do it right.
Cool thanks for watching
Thank you for showing the actual box of the repair part, much appreciated!
Cool glad I can help
Excellent at explaining. Thank you!
You're very welcome!
Extremely helpful, thank you sir
Most welcome!
I am getting ready to do this exact job and had watched another video but the guy was outside after dark with lights. Love the view that you gave iside the door, very helpfull.
Glad i could help
Thanks.
Mine are broken up top.
This helps
Glad I could help
having the same issue, thanks!
Good lock
This is the best explanation thank you
You're very welcome!
Excellent Video none of the others showed how to repair the actual cable end with the repair kit and thanks for making the effort to get your camera inside the door and showing how to seat the upper cable in the U shaped saddle, KEEP UP THE GOOD WORK!!!!!
One more thing I found out is that you have to replace the cones on BOTH ends of each cable this requires 2 X- 926-111 kits which gives you 8 ends to replace with new metal ones, When you remove the top latch I suggest you use a string to lower the latch inside the door to an area where you can work on it.
Very welcome
Baught my first truck at 17 2008 f250 extended cab for 3k, just fixed the ac and thank you for showing me how to fix my doors😎
Thanks ang good luck
Be careful not to strip the torx bolts!!!!!!! Great video... couldn't have done it without this video!!!
Glad the video helped
Thank you for this great video and telling us about the upper bracket. Going to fix both doors tomorrow!
You are welcome! Glad it helped
Thank you, from Australia
You're welcome!
@OurCabinInThewoods we watched your video thougherly and started attacking our door as per your directions and our problem is as exactly as you said. We've ordered the parts and will get it sorted. It's hard to get help here in Australia for F Trucks, so glad we found your video. We will be following you and be in contact for more tips as they arise. Happy Monday to you all.
@@jodieriches486 no problem glad I could help
Thank you sir save me a lot of money good video
Glad I could help
Thanks for the tutorial. Good to know. 🇨🇱
No problem 👍
The second cable end piece you put on is in the wrong place and will eventually fall off.
I'm not sure how it stayed there in the first place.
The kit came with 4 pcs. if you had replaced all 4 like you should have you would know
exactly where the odd shaped one went.
Thanks for the info
Thank you.
You're welcome!
Hey I had the exact same problem. Just wanted to say thank you this helped me out a lot!
Glad it helped!
Thank you for posting!
Our pleasure!
HOW DID YOU GET THE PLASTIC PIECE ON THE ROOF OFF SO YOU CAN TAKE THE LATCH OFF AT THE TOP?
It just pulls down use a screw driver good luck
This was fantastic!! This will solve the problem I have on both suicide doors
Good thanks for watching
Never saw any other video where they removed that upper bracket... smart idea, thanks... yeah, I'm alarmed guy as well.
Glad it helped thanks for watching
@@OurCabinInThewoods welp did it today.. both doors were inop. Couldn't do it the way you did as I have NO access to that top bracket. Didn't help that m in Tampa area and it's blasting hot... 2 A/C break, 1 jump in pool break, and I'm done... then a long pool break!!!
All of my Ford Van's cables go bad. I Need a bunch of those!
ya it easy fix
Very helpful I didn’t have a clue where to start I hope it’s as easy as you make it look wish me luck
👍
You made this so simple I could do it and trust me I know nothing about vehicles😅😂🤣✌💗 happiness
You can do it!
Great info, I have same issues going on
Good luck and mine is working just fine still.
OK, thanks. Just purchased the 4 chrome cable stops. Three of the 4 were round at the top and the fourth was not. Should it have been 2 round and 2 not round?
Should be 2 and 2. I pinned a comment about where they go I miss spoke. It's the top comment.
@@OurCabinInThewoods Thanks. Going to return them to autozone.
And pick up a T40 to remove the door latch.
OK, I run into a problem. As can seen from the attached picture they sell the cable stops in a package. There are 3 large diameter stops and 1 modified. See picture. Which 2 go to which door? Thanks in advance 3:40
Can’t attach picture.
thanks for the great video keep up the good work made working on my F250 door a heck of a lot easier
Thank you glad I could help.
Great video! Thanks!
your welcome
@@OurCabinInThewoods Just got both of my doors fixed. Thanks again for the great video.
great video. super helpful. very nice job showing how to fix this
Glad it helped you out. Have a great day.
Great! Thanks.
Yes good luck
Good Stuff
Appreciate it
Nice video.. Very detailed... Seen 3 other videos on how take care of the fix.. Yours was the best... 100
Thank you and thanks for watching.
Each end of both cables needs an aluminum cone, with that odd one (round with a flat side) going to the top lock mechanism.
Make sure that the plastic cable (with the metal core) “bottoms out” near the end of the aluminum cone - not somewhere in the middle - just like you stated.
Those plastic holders with the yellow catches can also be released with a small, 5/16” socket (with a lot a wiggling) or, more easily, with small to medium needle nose pliers squeezing the two “ears” & pushing the holder free.
Your way works better for people either larger fingers.
Very good video !
Thanks for watching great comments
Good info and great cam work! I bet this is why my fUrd doors won't open. Damn, i miss the 60s/70s cars when things were simpler. Almost every problem we have now, you have to watch a damn video to fix it!!
Yeah I agree the good oldies were the best. Good luck you'll fix your doors.
Great instructional video Tony! I really needed this one!
Aaah Doors! I did a van conversion and removing panels is like a reverse engineering project.
It's pretty amazing how they make and put some of those components together.
Good job.
Is more hard when is broken. The lash in the bottom. Hatd to open. But a i did. Thanhs for the part number
Your welcome
Good job! That was easy enough!
Thanks!
this is great information Tony
You all show same video but my problem is cable is broke and and can not really get to bottom latch and drop down seat is in the way
Im a big guy and some times i would take out the front seat to give me room to work on the rear doors closed. But i did find this for you good luck. ua-cam.com/video/sWfWhBkqcOY/v-deo.htmlsi=liudlOp_U91TafLv
Front seat not the problem , its the back bench as it does not move . I picked up a 14 inch 90 degree pic that I believe will work. Thanks for the reply.
where did you get those metal ends for the cable?
Autozone part is Dorman 926-111. I showed the box in the video. thanks for watching
@@OurCabinInThewoods thank you!!
Thats the easy way.
Good
I was thinking when you said you was doing to replace the one cable why not replace both ...then you said the other was broker ,at least you don't have to go back in there . I always l ike your videos,even tho I won't be don't any of what you do on your channel I still enjoying it
Thanks for watching
Watching Tony, going to retire up at 2:00 am to get Hubby off to work! Oh, First!
Great video! The detail you showed on the clips is especially helpful. Do you recall what size Torx bit those two upper latch screws are?
Sorry i really don't my be 45-50T. i'm glad it help you. Thanks for watching
@@OurCabinInThewoods No worries. Turns out it is T40. I have the exact same problem where both the top and bottom holders are broken! It's like your video was made just for me!! LOL. I'll be doing the other door too as a preemptive strike. Again, thanks for making it easy to follow and understand.
Difficult photography that doesn't always show what is being talked about. Overall, a pretty well done video. I can use it when I have to. The doors on my 2001 350 are getting stodgy, so I will do it before it becomes a harder fix to do than if I wait until later. Thanks for your help with this annoying problem.
Thanks for watching
Please don't take this as I am trying to be a know-it-all. I watched your video a few times actually. and at 13:33 seconds you discover that one of them is shaped differently than the rest. So I went and did some looking for the parts because I have the same trouble with my 2004. and I found that odd part you should have used on the other end of the cable up by the bottom of the top latch. If you click on this link.i.ebayimg.com/images/g/qdgAAOSw9NdXtK7x/s-l1600.jpg . You will see that end was made to be used on the bottom of the top latch.It is cut that way because it's the only way you can get it into the bottom of the top latch is to have those sides cut off.I am glad I watched your video because I am a big guy like you.I was going to try and remove all the trim from the inside of the door while standing outside of the truck.