One of the best video on plumbing. Clear explanation with all the components used mentioned in the video as well as in the description. Thanks for the wonderful video.
Thanks for your valuable feedback and really appreciate the time you took to share your words regarding how I can improve the quality of the video. I will definitely consider your advice in my future uploads.
Great video, exactly what I was looking for! I have a different use to your application I want to draw water from tank to water my garden, will this set up still work for me?
Good video. Please give all the names of all the consumables with their names and sizes so that we can ask with the same name with the hardware store. It is a great DIY job. 👍👍
0.5 HP pump will be able to lift water around 30 feet. Please check the 'water head' of the pump mentioned in the Pump Manual. A pump can push water more than 50 feet up, but the pressure will reduce when it lifts water from 30 ft deep.
You need to check the head (height) of the pump. It will be mentioned in the catalogue like - 60 head, 80 head, 100 head.... Submersible pump is preferable for higher heads.
Do you mean we need to shut down the gate valve(yellow) on delivery line first before stopping the motor in order to retain the water in suction line so that we can't bother to do repriming on next operation?
Can i used this pump in my hill region where water source is located far apart nearly about 200 meter distance... Will it deliver water at my residence? If I keep the pump at home.
Dear Sir, the manufacturer have suggested to close the water o/p before switching off the pump. But it is not mandatory all the time. We can even close the ball valve after switching off the pump. It is not essentially required, if you are using the pump continuously.
Having a FV at the end of suction pipe will keep the pump primed for longer time. Any water that is remaining in the pipe will not be allowed to flow backwards through the valve toward the well / pond / sump / or any other water reservoir.
@@harishsn3480 I have one at my home. It was pulling water up to say 15 or 16 ft. Now it's not pulling. I got it serviced by changing the air seal,,inkfiller and bearing. No use. So I am thinking of attaching a FV. So only i asked. Thank you.
Dear Sampath Kumar, in such case we have check if there is any blockage at inlet suction filter, there are chances of blocked discharge lines also.. How old is your pump and how much is the capacity (HP)? and is it connected to sump? or well?
Dear Sampath Kumar, 0.5 HP Monoblock Centrifugal (Kirloskar) water pump will usually have (This will be in the company catalogue / brochure) which is 98.5 feet. Means, from the level of foot valve (which is at lower most of suction pipe) it can deliver water to a distance of 98 feet. If your , then the pump will struggle to perform. In that case we should go for higher range pump.
Mr. Spandan, No we cannot use a mono block pump for tube well. Instead you can use a Vertical Turbine Pump (multistage diffuser type pump) which is used to pump water from deep tube wells.
With this method, after priming only first time if we put suction pipe in a tank then in future we don't need to do priming again right?until water level downs below football..motor will do Self priming right?
Yes Mr. Aditya Mirajkar. Having a FV at the end of suction pipe will keep the pump primed for longer time. Any water that is remaining in the pipe will not be allowed to flow backwards through the valve until the water level falls below the FV.
Bro , did u installed NRV in discharge head or did moter pump precame with check valve in discharge head ? Because my model is missing check valve or NRV at discharge head . Help me Bro
How to control the flow of water while spraying for balcony plants? Water is coming at very high force. It keeps on emptying the bucket of water in a fraction of seconds. What to do to reduce this?
Mera motor well(kua) se pani utga toh rha hai lekin kabhi kabhi nhi aarha output se ...sab thik hai valve...infeler..etc...but mera input pipe wo bht lamba hai and hard hokr sidha nhi balki...tera gol gol hsi so isilye problem horha hai kiya??? Please tell
You need to check the head (height) of the pump. It will be mentioned in the catalogue like - 60 head, 80 head, 100 head.... Submersible pump is preferable for higher heads.
You can visit the company website of the pump manufacturer or you can order it from Amazon / Flipcart. or You can check the link of motor and pipe given in the description box
Dear Sir, 0.5 HP pump will only be able to lift water around 30 feet. Please check the 'water head' of the pump mentioned in the Pump Manual. A pump can push water more than 50 feet up, but it can't pull it up that far!!
Good video. My only suggestion is to include a static page of all consumables used with their names including sizes so that people interested can make a note. This will help when someone goes to a hardware shop to buy the consumables. Thanks
Dear Gentleman, Thank you very much for your valuable feedback and I really respect the time you took to share your words. I will definitely consider your advice and include all the necessary details in the description. As you wisely said - "It will help when someone goes to a hardware"
mera pani nhi aata tha wahi check karne ke liye ki water level kaha pe hai isliye iron thaga ke sath dala tha but thaga Tut gya bich Mai fasa hai iron agar pipe ko nikale teo Helena ka waja se iron niche gir jayega tab kya mai or gadda nhi kara sakta plz reply 😢
सर जी, मेरे पास हॅव्हल्स का 1 hp D1 मॉडेल का मोटर हैं. आधा ईंची लाईन 200 फीट दुरी सें आई हैं. उसमे इनलेट और आउटलेट का कितने इंच का पाईप जोडना चाहिये. धन्यवाद. 🙏🙏
Hello Sir, Check valves prevent flow in an opposite direction. Any way i have used Foot valve which keep the pump primed, allowing water to flow in, but not letting it flow back out, making them ideal for use in pools, ponds, and wells.
Please your videos pump name and model name please. Actually my side pump fan pump mini. And your video fan pump is to big. Please your pump model name please🙏🙏
Nice video, thanks. Can you help me calculate how much electricity my water pump consumes per hour. I use a Wizz mini motor made in Italy. 220v.....60Hz....3450min'......0.37kW....0.5Hp
Hello Mr. Young, To calculate the power consumption of your water pump just put the wattage of your water pump (0.37 KW) x operational hours and electricity tariff of your locality and you will get the units of electricity consumed by your water pump
Hello Vijay, Please find the details. CROMPTON - monoset electric water pump. Model no. MAD052(1PH)Y-18 Half HP, Single phase, 220V Ac Rs. 3500/- (March 2021) You can check the link of motor given in the description box
One of the best video on plumbing. Clear explanation with all the components used mentioned in the video as well as in the description. Thanks for the wonderful video.
நீ தான்டா மெக்கானிக் , ஒரு அருமையான மெக்கானிக், உன்ன வச்சு தான்டா நான் 1000 மிச்சம் பிடிச்சேன், நீ ரொம்ப நல்லவன்டா , எங்க இருந்தாலும் நல்லா இருப்பா டா
Am Overwhelmed with your words. Thanks a lot.
A good video buddy. But a word of advice, please keep the music volume down. Really irritating when your sound is less audible compared to music.
Thanks for your valuable feedback and really appreciate the time you took to share your words regarding how I can improve the quality of the video. I will definitely consider your advice in my future uploads.
6ly fbl5
Good videos bro keep it up thanks
Thank you very much for your feedback Mr. Suresh Raju
Thanks for uploading such useful video
Thanks for your fb
Ak pice chia
Crystal clear explanation thanks
Excellent dear👌🏻
Thanks for your feedback
💙👌👌👌 from Kasaragod,Kerala
Thanks for your feedback
This all I needed today
Good information
Thank you
Super video Thanks
Thanks to you for your motivation Mr. Riju Antony
Bro just awesome made my work simple
Thank you.
Nice... Good way to learn things
Thanks for watching and for your comment Mr.
Anand Lakshmipathi
Nice fitting process
Thank you Huidrom shanta Singh Ji.
Nice video 👍👍
Thank you 👍
Very nice explanation
Thanks for your feedback.
First we have to switch on the electric plug of a motor or we have to switch the motor switch?
First we have switch ON the motor switch
nice video
can i use it for my well 50feet depth, because we have no electricity, we have home solar system with 2.5kv inverter
the output pressure will reduce for 50 ft depth
Great video, exactly what I was looking for! I have a different use to your application I want to draw water from tank to water my garden, will this set up still work for me?
Dear Gentleman, thanks for your valuable feedback. Yes, the same set up will definately work to water the garden.
This video made my work ease.
Thank you
Superb video...thanks a ton buddy!
Glad! thanks for ur feedback.
nice knowledge bro
Thank you very much Mr. Rawat.
Thank you so much for this video 👍
Great to hear that.
well explained. thank you. 👍👍
Thank you very much Sir
I payed Rs. 4350/- (Mar- 2021) in my home town. You need to check the current price in your locality.
I loved the background music.
It gave the video a serene touch.
Thank you very much for your feedback.
thank you so much. this video is a great help. keep it up.
Thanks a lot for ur fruitful feedback
Thanks, I fully understand your tutor
Glad it helped
Very nice 👍🙂
Thank you very much👍
Two pipe ko kaise joined kar please batao 🙏🏻🙏🏻🙏🏻🙏🏻
Good video. Please give all the names of all the consumables with their names and sizes so that we can ask with the same name with the hardware store. It is a great DIY job. 👍👍
Thanks for the helpful advice and sorry for the delayed response. I have updated the material list in the description box.
super
Thank you
Good job! 🙏🏽
Thank you.
Kya yah 30 fit borwell se pani nikal sakta hain
0.5 HP pump will be able to lift water around 30 feet. Please check the 'water head' of the pump mentioned in the Pump Manual. A pump can push water more than 50 feet up, but the pressure will reduce when it lifts water from 30 ft deep.
You need to check the head (height) of the pump. It will be mentioned in the catalogue like - 60 head, 80 head, 100 head....
Submersible pump is preferable for higher heads.
Can i use it for govt supply water
Connecting motor to government supplied water line is Illegal and Punishable offence. Please check with water supply board.
very good video , thank you sir
So nice of you Sir. Thanks for your motivation
Very usefull.
Thank u
Do you mean we need to shut down the gate valve(yellow) on delivery line first before stopping the motor in order to retain the water in suction line so that we can't bother to do repriming on next operation?
No its not required.
So good
Thank you very much for your feedback.
Can i used this pump in my hill region where water source is located far apart nearly about 200 meter distance... Will it deliver water at my residence? If I keep the pump at home.
You need to check the head (height) of the pump. 60 head, 80 head, 100 head....
Submersible pump is preferable for higher heads.
is it not self priming pump? what is the use of that ball valve in that installation?
Any pump should have valves attached at the outlet to regulate 'pressure' within a pump.
I want this water pump same present how much cost also send me Purchase link
Crompton 0.5HP 50 Water Pump
amzn.to/3NyXPzZ
Will not it harm pump, if we close the water output before switching off. Bcoz pump is sucking water and creating pressure in output nozzle.
Dear Sir, the manufacturer have suggested to close the water o/p before switching off the pump. But it is not mandatory all the time. We can even close the ball valve after switching off the pump. It is not essentially required, if you are using the pump continuously.
Pipe se kinta dhur Tak jayga 200 fit tag jaga ky
the pressure will reduce for 200 ft.
Is that pump not self priming
Yes. Its a self priming pump
Already there is foot valve in the motor. Is there any necessity to attach one more foot valve at the end of the suction tube/pipe ?
Having a FV at the end of suction pipe will keep the pump primed for longer time. Any water that is remaining in the pipe will not be allowed to flow backwards through the valve toward the well / pond / sump / or any other water reservoir.
@@harishsn3480 I have one at my home. It was pulling water up to say 15 or 16 ft. Now it's not pulling. I got it serviced by changing the air seal,,inkfiller and bearing. No use. So I am thinking of attaching a FV. So only i asked. Thank you.
Dear Sampath Kumar, in such case we have check if there is any blockage at inlet suction filter, there are chances of blocked discharge lines also.. How old is your pump and how much is the capacity (HP)? and is it connected to sump? or well?
@@harishsn3480 0.5 h p and from borewell.
Dear Sampath Kumar, 0.5 HP Monoblock Centrifugal (Kirloskar) water pump will usually have (This will be in the company catalogue / brochure) which is 98.5 feet.
Means, from the level of foot valve (which is at lower most of suction pipe) it can deliver water to a distance of 98 feet.
If your , then the pump will struggle to perform. In that case we should go for higher range pump.
Can it use in tube well
Mr. Spandan, No we cannot use a mono block pump for tube well. Instead you can use a Vertical Turbine Pump (multistage diffuser type pump) which is used to pump water from deep tube wells.
Nice work
Thank you Mr. Zainab Kanwal
Sir suction pipe me futbal lagana jaruri hai kya bina lagaye pani dega ki nai
Hello sir,
Agar footwall nahi daala tho, pump chalu karne ke time pay apko baar bar pani dalke priming karna padaga.
With this method, after priming only first time if we put suction pipe in a tank then in future we don't need to do priming again right?until water level downs below football..motor will do Self priming right?
Yes Mr. Aditya Mirajkar. Having a FV at the end of suction pipe will keep the pump primed for longer time. Any water that is remaining in the pipe will not be allowed to flow backwards through the valve until the water level falls below the FV.
Bro , did u installed NRV in discharge head or did moter pump precame with check valve in discharge head ? Because my model is missing check valve or NRV at discharge head . Help me Bro
I have not installed NRV in discharge head.
Can we cpvc pipe instead of suction pipe
Yes. We can use CPVC for suction.
Nice information .... Can we use the same measurement pipes and fittings for 1HP motor as well.
Yes, definitely, provided the suction and delivery side has 1 inch diameter.
@@practotech2997 thank you for the reply. I brought Lakshmi pump and unfortunately the suction turned out to be 1.25...
Dear Mr. Harish, if 1.25 inch dia pipe is not available in your locality, you can use 1.15 to 1 inch reducers
@@practotech2997 sure. Thank you Sir
Can we use centrifugal pump of 1 HP for getting the water to 3rd floor
You need to check the head (height) of the pump. 60 head, 80 head, 100 head....
Submersible pump is preferable for higher heads.
How to control the flow of water while spraying for balcony plants? Water is coming at very high force. It keeps on emptying the bucket of water in a fraction of seconds. What to do to reduce this?
You have to use a "pressure reducing valve"
Mera motor well(kua) se pani utga toh rha hai lekin kabhi kabhi nhi aarha output se ...sab thik hai valve...infeler..etc...but mera input pipe wo bht lamba hai and hard hokr sidha nhi balki...tera gol gol hsi so isilye problem horha hai kiya??? Please tell
Can we use 0.5 hP for 25 feet lead below. ... Please
You need to check the head (height) of the pump. It will be mentioned in the catalogue like - 60 head, 80 head, 100 head....
Submersible pump is preferable for higher heads.
.64 kw solar fittings can 0.5 hp pumpset work
You can use two solar panels each of 250 watts total 500 Watts to run your pump but the pump will only work for 4 to 5 hrs during bright day light.
sir same motor I have
But now pressure is becoming very low
What to do ?
Hello Sir,
Make sure the suction pipe is free and clear of debris. Less flow into the pump, will yield less flow out of the pump.
Have you come across 2/4hp installation if you have please upload the video on single phase with all the switch installed
No sir, not yet!
Good one
Thanks Srinivas.
Mono block dukan kaha hai
You can visit the company website of the pump manufacturer or you can order it from Amazon / Flipcart. or You can check the link of motor and pipe given in the description box
Good
Thanks for your feedback
can it work 30 feet depth ?
Yup it works for 30 ft deep.
Please Explain is Hindi language in better understanding everything and everyone thankyou😊
Sure. Thanks for your feedback
Super
Thanks
Sir,
0.5HP motor can use 3rd floor lifting water to tank or no please advice
Dear Sir,
0.5 HP pump will only be able to lift water around 30 feet. Please check the 'water head' of the pump mentioned in the Pump Manual. A pump can push water more than 50 feet up, but it can't pull it up that far!!
😮❤❤❤❤🎉
Thanks for ur f/b
Pipe clemp kitene Inch ka he
Clamps are adjustable.
You have to use 1 inch clamp for 1 inch pipe.
حياك الله شسمه المطور حبيبي اخوك من العراق
Dear Mr. Gazey, Thank you very much for your support and inspiring words.
Good video. My only suggestion is to include a static page of all consumables used with their names including sizes so that people interested can make a note. This will help when someone goes to a hardware shop to buy the consumables. Thanks
Dear Gentleman,
Thank you very much for your valuable feedback and I really respect the time you took to share your words.
I will definitely consider your advice and include all the necessary details in the description.
As you wisely said - "It will help when someone goes to a hardware"
V ub 5:42 5:45 5:45 5:45 5:45
👌👌
Thank you Mr. Yadav
mera pani nhi aata tha wahi check karne ke liye ki water level kaha pe hai isliye iron thaga ke sath dala tha but thaga Tut gya bich Mai fasa hai iron agar pipe ko nikale teo Helena ka waja se iron niche gir jayega tab kya mai or gadda nhi kara sakta plz reply 😢
If it is a self priming pump, u need not to worry about the water level
It is recommended sir to use footvalve in .5 hp waterpump?
Thanks for your input Sir. Yes, it is recommended to use foot valve in 0.5 HP water pump.
How to bying
U can buy it online or u can buy directly from local dealer.
1hp price
Around ₹9,200 - checked in the websites. Please check with ur local dealer aswell.
How much
Crompton 0.5HP 50 Water Pump
amzn.to/3NyXPzZ
Motor prize???
It was Rs.4300/- in Mar 2021
You can check the link of motor and pipe given in the description box
Prize???
It was Rs.4300/- in Mar 2021
You can check the link of motor and pipe given in the description box
Kitna foot 30 35 40
This has 60 feet
@@practotech2997 oo
where can I buy the motor and suction pipe online ? please guide.
Sir,
You can visit the company website of the pump manufacturer or you can order it from Amazon / Flipcart
You can check the link of motor and pipe given in the description box
Price kitna hai
It was Rs.4300/- last year (Mar 2021)
You can check the link of motor and pipe given in the description box
सर जी, मेरे पास हॅव्हल्स का 1 hp D1 मॉडेल का मोटर हैं. आधा ईंची लाईन 200 फीट दुरी सें आई हैं. उसमे इनलेट और आउटलेट का कितने इंच का पाईप जोडना चाहिये. धन्यवाद. 🙏🙏
👍👌🌹🙏
Thank you
কোথায় পাবো
You will get it in any electrical shop.
You can check the link of motor given in the description box
Saan Po nabili yan
Crompton 0.5HP 50 Water Pump
amzn.to/3NyXPzZ
Sir...u not connected check valve or nvr in the discharge line...why?
Hello Sir,
Check valves prevent flow in an opposite direction. Any way i have used Foot valve which keep the pump primed, allowing water to flow in, but not letting it flow back out, making them ideal for use in pools, ponds, and wells.
@@practotech2997 Thanx sir for response....pls let me know...where unions are connected in discharge line...pls help
Hello Sir, Unions are usually connected between priming valve and shutoff valve
@@practotech2997 thanx a lot👍
thumba upakara aaaithu anna
ಧನ್ಯವಾದಗಳು..
Price
I paid Rs. 4,350/- (Mar-2021) in my home town. You need to check the current price in your locality.
You can check the link of motor given in the description box
Model no kya hai
Its Crompton 0.5HP 50 Water Pump
amzn.to/3NyXPzZ
Nice 👍🏻👍🏻 🇮🇳 Kuki 23|03|2022
Thank you.
Quter hp pump yell sigatt Kundapuradalle
Quter HP pump is not available in market now.. Even i checked (for my own requirements) in many shops @ SP Road Bangalore and in Mysore aswell.
Please your videos pump name and model name please.
Actually my side pump fan pump mini.
And your video fan pump is to big.
Please your pump model name please🙏🙏
Its Crompton 0.5HP 50 Water Pump
amzn.to/3NyXPzZ
1.5 mil leka i sa pump
Yes 1.5 HP Single Phase Water Pump is available
Hello bro
Hello Gentleman.
Muje ek chahiye
Yeh pump tho har electrical shop may miltha hai Sir. Aap online may be order kar saktha hai.
You can check the link of motor given in the description box
please share pump model number
Its Crompton 0.5HP 50 Water Pump
amzn.to/3NyXPzZ
jab baat karte aur sunte hain toh kya music laga dete ho aap??? video mute kar k dekhna pada... shor ka bht shoq h shyd aapko ..
Sorry Rajnish, I didn't realized this while editing the video. Lot of viewers complained the same!! Will not repeat the same mistake again.
Nice video, thanks. Can you help me calculate how much electricity my water pump consumes per hour. I use a Wizz mini motor made in Italy. 220v.....60Hz....3450min'......0.37kW....0.5Hp
Hello Mr. Young, To calculate the power consumption of your water pump just put the wattage of your water pump (0.37 KW) x operational hours and electricity tariff of your locality and you will get the units of electricity consumed by your water pump
1 KW x 1 hr = 1 Electrical Unit
என்ன ரேட்டு
Hello Vijay,
Please find the details.
CROMPTON - monoset electric water pump.
Model no. MAD052(1PH)Y-18
Half HP, Single phase, 220V Ac
Rs. 3500/- (March 2021)
You can check the link of motor given in the description box
Pierce
Crompton 0.5HP 50 Water Pump
amzn.to/3NyXPzZ