my drone is running automatically after arming., and one more problem is that in my kk2.1.5 flight controller in receiver test setting all values are not set to zero by the transmitter trims tell me what i do for fixing these problems
Thanks bro, configuring Ardupilot is a bit confusing, so plz in Ur next video explain in detail, Moreover, also elaborate the process of setting different flight modes (like RTL, Loiter etc). Once again thank you for making awesome videos till today.
bahoot badhiya sir but ye quick video he iska part banaiye depth video banaiye .usme same 9x remote ka setup 3 mode switch setting everything explain kariye and fir mission planner programing bataiye video mast banegi aap aacha samjhate ho👍
great . i make drone with k.k. 2.1 board but my drone's motor rpm suddenly increase it goes upward right direction and does not in stable position. so what i should do ?
Hey bro I am big confusion in Pixhawk and dji naza ...which one you will recommend ..as you are an experienced person. So plz I am making my drone for aerial photography as well as for fun. So plz tell
If you want commercial use go for dji naza As pixhawk available in market are cheap clones , it is open source so no testing gurantee If you want drone project , go for pixhawk too many great features
Hi.... what is the cost of these all electronics including battery, I am planning to buy it, but in seller site the package is not included with battery.... please reply, thank you.
Hi, Can anyone pls help me in the issue of "Pre Arm: Need 3D fix" it's not at all arming. Kept for several minutes without clouds still same issue. I reinstalled several times It's latest APM 2.8 & Latest autopilot Installed 3.2.1 which picks automatically avilable as latest version. Compass is calibrated. Checked both enabling and disabling Geo fencing
Hi . I noticed that you powered the Apm flight controller with a power module and Also the ESC as well is it necessary to power it with both the source (power module and ESC) . I've seen some other videos where people have disconnected the positive wire from the esc as it's not required if power module is used. Can you clear this doubt for me I am confused as I'm building my first drone with Apm.
bro APM you have mounted is not exactly in center but towards little left as it can be clearly seen in video. Samething I did to mount GPS, I mounted APM little left & my drone would flip off. After mounting APM in the center my drone flies. How could you mount it to left than center?
Brother,I am a 7th class student Do you buy as a kit or separate My friend and l build this quadcopter and programme d as you did. Thank you for this kind information. Can you upload a video of how to make RC remote
Hi bro we cant be able to fly our drone because when whe started motorst it lays to one side we think its motor problem but also the pitch and roll channels didnt effect anything why?
dear sir I am making a drone with 4 motors with KK 2.15 flight controller and three motors are running at good speed but one motor that is starting motor is running at more than speed how can I control the speed of first motor please help me sir
This the best Drone Designing video I have watched. And I would like to ask you about are we can use flysky fsi6 6ch rc transmitter and receiver for the drone. Please reply me.
Just two questions: 1: Is there an alternative to the provided Allen screws? 2: What economic and effective fpv setup should one use with such a drone for sport flying/racing?? (I'm using a cheaper one, with a single transmitting and receiving antenna and a cheap micro cam...my range with the cam is about 600mtrs , transmitter range is quite high)
When you were plugging in the GPS , you left the second connector unplugged , and at your finished project it is tucked in or plugged in . What are those 2 wires for on that connector and does it get plugged into the flight controller ? Thanks
If you use the battery 2200mAh ,how many minutes can you fly?could you tell me? And how about the battery 5200mAh if you use 5200mAh .how many minutes can you fly?
Hello bro I have successfully built the drone But I am having some problems while flying the drone The drone keeeps on spinning (yawing) At first I thought one of the motor was not spinning in the right direction But all the motors are spinning diagonally clockwise and diagonally counterclockwise Then I thought it was the esc calibration problem I calibrated it more than 5 times Then I thought it wouldn’t be the esc calibration problem cause if the ESCs are not calibrated correctly Then the drone will not spin(yaw) it will either pitch up or down or roll left to right Then what is the problem???😔😔😕 Pls help bro pls…….
Bhai mere paas naza kahe quadcopter hai this remote se usko udate Hain vah kho Gaya bhai please bataiye usko kis remote control se ud jaaye uska model number naza s5200 hai
Please I have a problem, my power module does not energize my APM board, when I measure the pins only a 1V output arrives ... should I change it or how can I solve this problem? thanks
I think you might have a worn out diode or a transistor.... The output for such devices usually should be around 5V (I personally have never used a gps module on my planes, so can only speculate what the issue may be) Use a multimeter, or an oscilloscope to check the connections, and change the required component
APM 2.8:- www.flyrobo.in/ardupilot_apm_2.8_flight_control_board_drone/?tracking=5c723900abvrl
KK 2.1.5:- www.flyrobo.in/kk2.1.5_lcd_flight_controll_board_for_fpv/?tracking=5c723900abvrl
GPS:- www.flyrobo.in/gps_module_ublox_neo-6m_with_electronic_compass/?tracking=5c723900abvrl
Flysky Tx and Rx:- www.flyrobo.in/flysky_fs-i6_2.4g_6ch_afhds_rc_transmitter/?tracking=5c723900abvrl
Would you prefer ArduPilot over Kk2.15 if yes, why?
@@geekyfreak7920 yes because we cannot connect gps and telemetry to kk2.15
Does this site send the products to Brazil?
Yes
My aap see milna chahta hu drone ke liye samstipur
You and your projects are the accurate and the best one
All videos are nice in your channel i am your follower
YE BACHHA BAHUT AGE BADHEGA, GOD WILL SURE BLESS YOU🙌🙏
Just subscribed; huge thanks, you just helped me with a school build!
my drone is running automatically after arming., and one more problem is that in my kk2.1.5 flight controller in
receiver test setting all values are not set to zero by the transmitter trims tell me what i do for fixing these problems
Pls i really need answers , can a video transmitter alongside a camera be connected to audipilot apm 2.8
f450 quadcopter with apm 2.8 mein follow me setup kis trah hoga
Great... one more quadcopter build. It's awesome
bro which moter are used share link is when i open other are......
In apm arducopter and ardupilot is same or different.It has same firmware or not.
Tere drone ka circuit boarb toh👍👌👍👌hai😃😉
Hello bhai ya ap blue colour board kya ha bro please reply
Thanks bro, configuring Ardupilot is a bit confusing, so plz in Ur next video explain in detail,
Moreover, also elaborate the process of setting different flight modes (like RTL, Loiter etc).
Once again thank you for making awesome videos till today.
bahoot badhiya sir
but ye quick video he iska part banaiye depth video banaiye .usme same 9x remote ka setup 3 mode switch setting everything explain kariye and fir mission planner programing bataiye video mast banegi aap aacha samjhate ho👍
You don't need to program anything on your pc? Like drivers for gps things like that?
Can i use radiolink at-9s transmiter
Bhai is emax motor long time flight karna ma heat hota hai keya?
Awesome built bro. love it from Nepal.
Sir, aapne is video me kis company ka motor use kiya hai,
Please help me.
great . i make drone with k.k. 2.1 board but my drone's motor rpm suddenly increase it goes upward right direction and does not in stable position. so what i should do ?
Sir, is frame ko kasne ke liye kaun se number ki ln key use ki jati hai
Can this plane carry 1kg to 2kg ?
once again amazing video!! hats off to you!!!
how should i add camera and gimbal to apm2.8? can you help me out?
Hey bro I am big confusion in
Pixhawk and dji naza ...which one you will recommend ..as you are an experienced person.
So plz I am making my drone for aerial photography as well as for fun.
So plz tell
I will recommend Pixhawk with GPS
@@ViralScience thank you
If you want commercial use go for dji naza
As pixhawk available in market are cheap clones , it is open source so no testing gurantee
If you want drone project , go for pixhawk too many great features
@@ashishx200000 I made it ....but I am having some issues with my pixhawk....Will you help me...???plzplz
@@vedantsatpute5167 i am expert in making any type of drone , any flight controller
bhai aap ne jo battry use ki h vo kha se buy ki vhi chahiye
Hi.... what is the cost of these all electronics including battery, I am planning to buy it, but in seller site the package is not included with battery.... please reply, thank you.
Hi,
Can anyone pls help me in the issue of "Pre Arm: Need 3D fix" it's not at all arming. Kept for several minutes without clouds still same issue.
I reinstalled several times
It's latest APM 2.8 & Latest autopilot
Installed 3.2.1 which picks automatically avilable as latest version.
Compass is calibrated.
Checked both enabling and disabling Geo fencing
Can we install go Pro camera on tat drone.. with WiFi connection...if possible please make a video.
Very nice bro
Can I make this one with the F250 ?
Sir, is video me jo frame hai bo,
X frame hai, ya
+ frame hai,
Please reply me
Would you recommend ArduPilot over KK2.15 if yes, why!?
Hi . I noticed that you powered the Apm flight controller with a power module and Also the ESC as well is it necessary to power it with both the source (power module and ESC) . I've seen some other videos where people have disconnected the positive wire from the esc as it's not required if power module is used. Can you clear this doubt for me I am confused as I'm building my first drone with Apm.
Ur English is very impressive
What is range of the transmitter
bro APM you have mounted is not exactly in center but towards little left as it can be clearly seen in video.
Samething I did to mount GPS, I mounted APM little left & my drone would flip off.
After mounting APM in the center my drone flies.
How could you mount it to left than center?
Brother,I am a 7th class student
Do you buy as a kit or separate
My friend and l build this quadcopter and programme d as you did.
Thank you for this kind information.
Can you upload a video of how to make RC remote
Sir, drone me, (cw) motor lagati hai
Ya
(Ccw)
Please help।me
Good work and nice project bro
very well explained !!
2200kv motor is best for this drone?
Bro when did you use the kk2.1.5 given in the description???
bro when will you be adding 2nd part of this video i am keenly waiting for it
What is the weight of this drone after setting all the oarts
Bro can we made esp 32 or stm32 flight controler (professional) .can u try ?
Just want to know flyrobo is safe To order . Can we do cash on delivery.
Yes its safe
Hi bro we cant be able to fly our drone because when whe started motorst it lays to one side we think its motor problem but also the pitch and roll channels didnt effect anything why?
Is this drone able to photography??
dear sir
I am making a drone with 4 motors with KK 2.15 flight controller and three motors are running at good speed but one motor that is starting motor is running at more than speed how can I control the speed of first motor please help me sir
Great job !
Does the flysky th9x tx support telemetry ?
awesome
keep exploring
Perfect video for me. Thanks!!!
Do you need dgca approval for flying this
Can you help me brother?
I did it same bt I'm facing problem tor program th apm 2.8 flight controller please help me
I am trying it from so long ❤️
I m getting error of high gps HDOP ....... can you help value of hdop is 3.24 to 6.28
Nice
waiting for this finally done 😎😎
can we use fly sky ct6b
Nice bro..I was want for your vidoes
Can we use 14.8 volt and 5200mah battery
how to start the motors? i have flysky i6,alredy bind, but i dont know whats the ignition sequence
hudobnez you should check ur arm sequence on software
Very nice
Nice video bhai
😙😎😍
Thanks. Very useful
How much weight can it lift
In same receiver where to add servo motor
Nice👍👍👍
Can I use 40A esc
Need help
My apm drone not armed.But i connect apm board my laptop it armed.again I remove the cable it's not armed.please help me
Problem solved or still facing same issue
Where I buy the Allen screws for motor fixing
it comes in package
nice music & build video,
This the best Drone Designing video I have watched.
And I would like to ask you about are we can use flysky fsi6 6ch rc transmitter and receiver for the drone. Please reply me.
Yes
You make any drone
Bro where did you. Buy that battery
Can apm2.8 flight controller run from flysky ct6b remote controller
Without power module ye work krega kya esc k sath
What is the difference between 1000 kv bldc motor and 1400kv bldc motor
If i use f330 frame???
Just two questions:
1: Is there an alternative to the provided Allen screws?
2: What economic and effective fpv setup should one use with such a drone for sport flying/racing?? (I'm using a cheaper one, with a single transmitting and receiving antenna and a cheap micro cam...my range with the cam is about 600mtrs , transmitter range is quite high)
Bro... Does it have return to launch function feature... Please say... 🙏
I made this drone. when I trying to fly it But it falling on left side doesn't fly please help
Callibrate the drone
When you were plugging in the GPS , you left the second connector unplugged , and at your finished project it is tucked in or plugged in . What are those 2 wires for on that connector and does it get plugged into the flight controller ? Thanks
That 2 wire is for i2c . Normally when you want to use external compass that built in inside GPS . This APM 2.8 board already have Compass inside .
@@BOLEHBUAT bro nowdays only some of the apm boards have built in compass so it is good to plug the external compass
Did you register it in DGCA website to get UIN?
They don't ship outside India?
which motor did you use ,how much kv is it?
Anyone know alternate low cost gps module? pls suggest
King of arduino🔥🔥🔥
If you use the battery 2200mAh ,how many minutes can you fly?could you tell me? And how about the battery 5200mAh if you use 5200mAh .how many minutes can you fly?
what should be its range
How much it's fly for 2200 mah
bhai kansa online site me drone parts order kartha ho
I am your follower
What motor are you using?
Hello bro I have successfully built the drone
But I am having some problems while flying the drone
The drone keeeps on spinning (yawing)
At first I thought one of the motor was not spinning in the right direction
But all the motors are spinning diagonally clockwise and diagonally counterclockwise
Then I thought it was the esc calibration problem I calibrated it more than 5 times
Then I thought it wouldn’t be the esc calibration problem cause if the ESCs are not calibrated correctly
Then the drone will not spin(yaw) it will either pitch up or down or roll left to right
Then what is the problem???😔😔😕
Pls help bro pls…….
West coast gangster beat starts @ 12:36.
Bhai mere paas naza kahe quadcopter hai this remote se usko udate Hain vah kho Gaya bhai please bataiye usko kis remote control se ud jaaye uska model number naza s5200 hai
Bhai upnaa yea sav kuch kitnaa maa kareda haa
Please I have a problem, my power module does not energize my APM board, when I measure the pins only a 1V output arrives ... should I change it or how can I solve this problem? thanks
I think you might have a worn out diode or a transistor....
The output for such devices usually should be around 5V (I personally have never used a gps module on my planes, so can only speculate what the issue may be)
Use a multimeter, or an oscilloscope to check the connections, and change the required component