This was golden... Nice and clear info how to do timing chain removal and install. Now i know how, on my Grand Vitara 2001 :)... and you have a new subrscribor.
Hey your video is awesome 🙂 I'm working on a Vitara xl7 and I need to replace the cam sensor I pulled old one out n can't get new one all the way back in I know to make sure the 2 ears on new sensor will line up in the spot to make room but it just won't go back I even tried to put the old one back to see if it was different and couldn't get old one in either
I Just Bought a Suzuki used one 2008 grand vitara v6 2.7 lts. They reap me off Now i m dealing with it Anyways The engine starts on time (No hesitation at all) Temperature looks good after an hour of driving Runs pretty good on flat surfaces...except hills My problem is that - the scanner plug doesn't work. (Can't read any codes) - I Just found that they disconnect the oil sensor or knock sensor - It looses power after warmed up going up a hill. - it makes a rattling noise by the driver side of the engine. I m fixing to run all types of tests .... Oil pressure , engine pressure (compression) Any other suggestions Thanks for your advices
Hey men how doing ..hope u read my comment quick question how much torque can i put on the timing gear and guide of Suzuki grand vitara 2005 im about to do that ...thank u 4 u help...
I am working on my 2.5 tracker and I've been following your instructions. But when I took off cam shaft sprocket on the driver's side, the camshaft moved 2:00 position. So how do I get it back to tdc?
Hola amigos tengo el mismo motor de mi Vitara ando unos kilómetros y se para tengo que esperar unos 10 minutos lo hecho andar y arranca cuál sería el problema por favor
I need to replace the head gasket on my 2005 Suzuki 2.7L XL7...on the driver's side and was wondering if I have to remove the cams in order to remove the head. Also can you direct me to how to check/set timing for the 2.7L. I looked for repair manuals and had zero luck...thanks in advance.
Kmart okay I might well that was a timing of the engine I put the key up our number one number one piston des Moines piston is not an incentive and I just can't get get the car started why is that the cursed what is not the car the car is not starting why is it called not starting
Yes i really get alot from watching your video's !Thanks for all your help !
This was golden... Nice and clear info how to do timing chain removal and install. Now i know how, on my Grand Vitara 2001 :)... and you have a new subrscribor.
thanks for the sub and support!
Hey your video is awesome 🙂 I'm working on a Vitara xl7 and I need to replace the cam sensor I pulled old one out n can't get new one all the way back in I know to make sure the 2 ears on new sensor will line up in the spot to make room but it just won't go back I even tried to put the old one back to see if it was different and couldn't get old one in either
I Just Bought a Suzuki used one 2008 grand vitara v6 2.7 lts.
They reap me off
Now i m dealing with it
Anyways
The engine starts on time
(No hesitation at all)
Temperature looks good after an hour of driving
Runs pretty good on flat surfaces...except hills
My problem is that
- the scanner plug doesn't work. (Can't read any codes)
- I Just found that they disconnect the oil sensor or knock sensor
- It looses power after warmed up going up a hill.
- it makes a rattling noise by the driver side of the engine.
I m fixing to run all types of tests ....
Oil pressure , engine pressure (compression)
Any other suggestions
Thanks for your advices
Hi this is Neil an I’m working on a 1.7 Suzuki vitara Question I the cam shaft chain sopose to be stiff or should it have a little slack
Where is the 2nd part video of this "Suzuki grand Vitara 2.5/2.7l camshaft/timing chain install", showing the other 2 chain setups/installations?
Hey men how doing ..hope u read my comment quick question how much torque can i put on the timing gear and guide of Suzuki grand vitara 2005 im about to do that ...thank u 4 u help...
Hola q tal q problema te dio el auto para q le hallas cambiado el kit de distribución
How did you get the old tensioner out??? Mine is stuck I can move it side to side a little bit but it doesn't want to come out
I am working on my 2.5 tracker and I've been following your instructions.
But when I took off cam shaft sprocket on the driver's side, the camshaft moved 2:00 position. So how do I get it back to tdc?
Does this motor got to be on top dead center before timing
Question do I have to remove the head to replace the valve seal?
Yr the best forever
What's the actual torque meant to be?
Awesome video, what's the link for the parts?
Hey.. Matthew love ur video.. I missed the part about the camshaft was reworked with new gears.
where is the sensor ckp located? Please , 🙏 Greetings from Venezuela
Amy video on drivers side?
Is there some way I can msg you to ask a few specific questions at all please?Great video but Im not even this far into the engine & having issues.
email me highgrooveauto30@gmail.com
Oh working on 04 Chevy Tracker v6 twincam 24 valve
Hola amigos tengo el mismo motor de mi Vitara ando unos kilómetros y se para tengo que esperar unos 10 minutos lo hecho andar y arranca cuál sería el problema por favor
I need to replace the head gasket on my 2005 Suzuki 2.7L XL7...on the driver's side and was wondering if I have to remove the cams in order to remove the head. Also can you direct me to how to check/set timing for the 2.7L. I looked for repair manuals and had zero luck...thanks in advance.
Yea! Why the heck is there no manuals to find on Grand Vitara V6?
How much can you do all the jobs
@@bintiandyasin8930 HAVE you found your PCV Valve yet !
Where can I get a suzuki escudo engine H27A engine year van 2006
I was looking at getting a Grand vottero is it worth it
If you are Willing to put up with an headache every now and then yes it is possibly worth. Just know it could cost to fix it one day.
no
Я английского языка не знаю но и так всё ясно и понятно хорошое видео мне помогло сделать свою гранд витару
Каким образом? Гидронатяжитель поставил не той стороной, крутит без динамометрического ключа бугеля распредвалов.
Nice
Then what about the bang 2 sitting
👍🔥
Notrabajan2cilindros
Kmart okay I might well that was a timing of the engine I put the key up our number one number one piston des Moines piston is not an incentive and I just can't get get the car started why is that the cursed what is not the car the car is not starting why is it called not starting
I V6 2.5 hey Mike listen could you drop me your number so I could call you please
email me first highgrooveauto30@gmail.com. maybe we can exchange numbers then.
Good compleit pleas
Matt whats your number?
Email me highgrooveauto30@gmail.com we can possibly trade numbers then.
@@MattShaughnessy6 do you have a video doing the cam sensor on a 02 Vitara XL7 2.7 I'm having trouble with it
@@MattShaughnessy6 Olá
Olá amigo manda o seu WhatsApp
email me Highgrooveauto30@gmail.com we might have a language barrier but we can get it figured out. I wold be happy to help.