700 mm/s | Klipper | CoreXY | Tilt Bed Leveling. This has it all! - TwoTrees SK1 3D Printer Review
Вставка
- Опубліковано 30 січ 2024
- This is my full review of the TwoTrees SK1 3D Printer. This Core-XY 3D printer boasts 700 mm/s print speeds, with all the neat functionality that Kipper firmware provides. It even has tilt automatic Bed Leveling!
Thank you TwoTreesfor providing the SK1 for review.
---------------------------------------------------------------------------
👀 See more information about the TwoTrees SK1: shareasale.com/r.cfm?b=246568...
Use promo code NBSK for a special discount from TwoTrees for my viewers.
TwoTrees website: twotrees3d.com/
---------------------------------------------------------------------------
Create a free profile at www.3dprintlog.com today, and start recording all your print settings and filament usage!
Print Details (settings, filament used, links to models, etc):
3D Benchy: www.3dprintlog.com/prints/231168
Captain America: www.3dprintlog.com/prints/241843
Desert Kiss Dice Tower: www.3dprintlog.com/prints/242210
Low Poly Squirtle: www.3dprintlog.com/prints/242513
---------------------------------------------------------------------------
👀 See my recommended printers, filament, and accessories on my Amazon Idea Lists! (Affiliate Links)
🆕 3D Printing Equipment for Beginners: amzn.to/2PNblSL
⚡ 3D Printing Equipment for Intermediate Hobbyists: amzn.to/2OOuQOy
💯 3D Printing Equipment for Advanced Users - Liquid Resin SLA/DLP: amzn.to/2PpqWuK
🎁 See the TEVO Tornado on Amazon: amzn.to/2TnhQhn
🎥 Hoffman Engineering UA-cam/Video Equipment - See on Amazon: amzn.to/2O9oP9I
🆕 Microphone - Sennheiser XSW-D Lavalier Set w/ ME-II - amzn.to/2F6ORYY
Thank you to all my Patreons for helping make these videos possible. Join me at / hoffmanengineering
Special thanks to my tier 2 and above patrons:
* Aaref A.
* Gábor B.
Christopher Hoffman
Hoffman Engineering
www.hoffman.engineering
#TwoTrees #3dprinting #hoffmanengineering - Наука та технологія
- I sounds like stealth chop is disabled to increase motor power at higher speeds.|
- Corner Quality can be improved with pressure advance.
1:16 are you sure it is Volcano nozzle? They changed it in the mean time? My nozzle is much smaller.
Looks like great quality! Let me send you some parts to print ;)
In your firmware update video you showed removing the EEMC storage and flashing it. What device was used to flash the EEMC? Is there a way to install Mainsail into Klipper on the SK1? Thanks.
It is an emmc adapter included with the SK1. Unfortunately I'm not familiar enough with klipper to know if you could install mainsail onto it, I'm not sure what access is needed.
@@HoffmanEngineering , I have a few more questions if you don't mind please.
What type of nozzle is used? I realize it will be a special high flow nozzle but is it a E3D, Volcano, M6, etc?
Thanks.
Does it print ABS/ASA reliably? TwoTree mentions ABS on their product page, but I don't see any reviewers print or mention ABS/ASA on this printer.
I have printed abs on it briefly. It was successful, and I see no reason it would not work reliably for longer print with ABS or ASA. It would also be very easy to enclose this printer, which would greatly benefit ABS printing.
My printer is down right now waiting on a part, and I'm having withdrawals. I've been watching 3d printing videos like a madman seeing other printers in the off chance I need to buy a new one.
What printer do you currently have? There are a lot of great options out there when you decide you need a second, or a third, or a 24th :D
I'm done with these reviewers showing us tests like benchy's in filaments where we can't see anything.
I appreciate the comment. The sample benchy was printed with the included white filament. I made sure to switch to more video friendly filament for the other tests. I'll keep it in mind for future reviews.
Thank you. Good to see you take accountability, earned a sub.@@HoffmanEngineering
WTF - manual z-offset with the paper method? :D
for that price, this is horrible
I know, right? I can't believe that was ever a standard. I'm surprised you don't have to bang a couple rocks together and do a rain dance or something.
On sale, it's faster and cheaper than the Bambulab P1P.
Paper is a common calibration tool used by even more expensive printers.
Calibration methods are not indicative of quality
@@Microplastic_Therapy of course calibration methods are not an indication of quality - in high end CNC applications you would use feeler gauges or ruby-tipped probes for a dial indicator
but you want to seriously tell me, that i need to zero my printer with a piece of paper? nozzle probing is so accurate nowadays, it lies well below the tolerance of the stepper motors
i havn't manually zeroed anything for years now
The offset is only done once so it's not a big deal