Use distilled water to protect the unit and pour your water in FIRST to prevent any bubbles. I have always filled my old Swiffer with my own solution and was hoping I could to do the same with the new Power model. Nice, helpful video! Thanks!
Thank you for posting! This is much easier than refilling the old swiffer wet jet bottles. Can't believe it's this easy actually. I was expecting a process involving boiling water, 2 screwdrivers and a few f bombs. The math on Murphy's if you're super curious like me: 750mL is around .2 gallons so *technically* you want a fifth of a quarter cup (should be in the neighborhood of 2.5tsp, or just shy of a tbsp). But that's hardly any and doubling that is approved on the Murphys bottle for deep cleaning floors. More than an eighth of a cup may leave residue 🤷🏻♀️ Not sure but most likely harmless. I normally use lysol+water or blue Mr clean+water+alcohol (don't add alcohol with just any cleaner) on LVP or tile floors with no issues but now that I have 1920s wood floors I'm all Murphys.
Thank you. This helps a lot. My older swiffer quit on me and I still have about 4 old full bottles left. I wanted to buy this new one but at the same time didn't want to lose all that money I spend on the old bottles. This will help. Great 👍 thanks for a great video.
Praise Jesus for this comment! I couldn't get that lid off for the life of me but thanks to this tip after trying it I was able to remove the lid like buttah! Thaaaaaaank youuuuu!
Ha! I thought it was just me. I went outside and put it against the side of a hard flat elevated surface lol and used my body weight to pop it off. Next time I know better😂
Yes! Thank you also for posting this! I was curious about the rubber portion on the bottle that gets punctured, where the solution comes out of. About how many times can you refill a bottle before that rubber stats to fail? Thanks!
It’s ghetto but on the wet jet I make sure the silicone bit is dry and stick a square of scotch tape over it. It had previously started leaking and this stopped it completely. I just replace the tape when I fill it.
I mean you could probably get away a few refills and if you didn’t want to start over with a new bottle you can use rtv silicone gasket maker. It’s literally what it I made for and it will make a self healing hole like you see on the rubber stoppers on hypodermic injection bottles. You’ll get quite a few piercings and it’ll cost you about $4 to get enough rtv to make 2,000 of those seals. Just mke sure you store the open rtv silicone properly so it doesn’t dry out Ps. I just bought one of these from Costco and haven’t opened it yet so I didn’t look at the seal yet, but I do know for a fact that rtv gasket maker will make a self sealing port. Just remember if the rubber bit is already silicone then silicone won’t stick to silicone and your seal will fail. If that’s the case you need to remove the seal and totally replace it with rtv. But it might not be silicone so I try before I went that far
The money you save on buying their solution will pay for another Power Swiffer unit if the warranty voids. I also agree with Murphys oil soap. Been using it for years...for everything. I also add the water first. Loved the user's comment about using distilled water.
My bottle won’t click in. It will spray but also leaks a little around top. I soaked in warm water and also just twisted the top off without warm. Both will not click in
Thank-you, thank-you, thank-you! Much more economical and eoc friendly. I'm not a fan of Murphy, but, I love Spic-n-Span and Lysol. My beautifully clean floors thank you.
Thank you so much for the video because when I saw that it cost $10, and that in just one turn my husband spent half of the jar, I couldn't believe it.
Does anyone have any regrets using the power mop vs the older swiffer? I was able to refill the older swiffer liquids easily. Had one bottle for tile and one for wood. Pads on the older swiffer are cheaper and did the job just fine. Does the power mop pads clean that much better to make it worth it?
Thanks for this video! I was in a bind, having just moved to a new place and really needed a hack on the power mop refill before the roommates got home. 😂 You are awesome 👏
Just found out today that I could use a reusable mop pad from a mop that’s not even Swiffer on my Swiffer power mop due to the little Velcro pads. I’m stoked because we don’t have to keep buying the disposable pads anymore
He used wood cleaner on tile floor. I've never done this, so before being critical about it, i need to ask if this works with the right water to oil mixture?
Thank you! The smell of their product is so overpowering and gives me a headache. Not to mention it would probably kill my parrots! We have to use natural solutions without perfumes for them.
Great video. I was debating whether to get this or not. One of my concerns was the continuous purchasing of cleaning solution from Swiffer. I also think there are reusable pads I can buy. I don't think I have any rechargeable AA batteries but that should be okay.
To avoid screwing up the original outlet, maybe drilling a half-inch/inch hole in the bottom or bottom side of the bottle then filling up the solution and covering the hole with duct tape might avoid screwing up the cap. Might have to replace the duct tape every so often but who cares.
same here!!!! it won't click into place and it's perfectly identical to the other bottle? going nuts! its not like it has a chip or something to know its being refilled!
If you twist the cap to tight it won’t reclick ! Try untwisting it one turn and clicking it if it’s to tight it doesn’t leave room for the side clips to squeeze in and lock it in place
my husband suggested i use a nail clipper to trim those nubs... i dont know if they are necessary to keep it shuit- i wonder if just filing them down a bit would make it easwier (that thing is REALLY hard to open!) but soaking it in hot water makes it much easirde, no trimming needed... i just have my husband oen it for me lol it makes me feel like a weaking, but whatever ;)
I was thinking of getting a second bottle and just putting plain water in it to flush the lines after each use of the diy solution and to remove the solution bottle when it’s not being used.
Question.... Do you have to rinse your MOS solution? Suggestion??? Making Solution...To avoid bubbles....Why couldn't you put water to fill level, then pour out 1/5 cup of water and then replace with 1/5 cup Murphy's oil soap (or what ever you choose) then cap and invert softly a few times to mix ? Maybe avoid bubbles as much as possible.
Thank you !!!!!! I can’t afford to buy these bottles all the time ! So much easier to make your own!! 2 dogs and horse no way I’m buying these daily lol
I take the empty bottle and fill a metal pan with two inches of water put pan on stove bring water to boil once boiling turn heat off put empty bottle the purple top of Swiffer into boiling water keep it in water 30 seconds after that take a wash clothes and purple top opens easily, put ur own solution in bottle then screw purple top back on till it snaps problem solved
This was one issue I had with this product. You have to buy their solution and change it so often. This has saved me. Thanks!!
Use distilled water to protect the unit and pour your water in FIRST to prevent any bubbles. I have always filled my old Swiffer with my own solution and was hoping I could to do the same with the new Power model.
Nice, helpful video! Thanks!
Thank you for posting!
This is much easier than refilling the old swiffer wet jet bottles. Can't believe it's this easy actually. I was expecting a process involving boiling water, 2 screwdrivers and a few f bombs.
The math on Murphy's if you're super curious like me: 750mL is around .2 gallons so *technically* you want a fifth of a quarter cup (should be in the neighborhood of 2.5tsp, or just shy of a tbsp). But that's hardly any and doubling that is approved on the Murphys bottle for deep cleaning floors. More than an eighth of a cup may leave residue 🤷🏻♀️ Not sure but most likely harmless.
I normally use lysol+water or blue Mr clean+water+alcohol (don't add alcohol with just any cleaner) on LVP or tile floors with no issues but now that I have 1920s wood floors I'm all Murphys.
I have a mixture of tile and wood floors. What is most effective and cleaning tile without leaving spots? Thanks so much!
Put the water in first, and you won't have bubbles. Thanks for making this video!!!
Oh wow I never knew this, I'm so glad I found this comment. Thank you so much!
I was gonna say the same thing lol
Being able to screw off the top changes everything. Thank you!!
Thank you. This helps a lot. My older swiffer quit on me and I still have about 4 old full bottles left. I wanted to buy this new one but at the same time didn't want to lose all that money I spend on the old bottles. This will help. Great 👍 thanks for a great video.
Thanks! DIY refills are super helpful I find
It is very hard to get lid off , however if you run it under hot water for about a minute it comes right off!❤❤❤
Thank you!! I could not get the lid off and your hack made it pop right off for me!!
Thank goodness for your comment becaise I would not have been able to get that lid off otherwise !!!
Praise Jesus for this comment! I couldn't get that lid off for the life of me but thanks to this tip after trying it I was able to remove the lid like buttah! Thaaaaaaank youuuuu!
@@angelabailey1805 praise denise*
Ha! I thought it was just me. I went outside and put it against the side of a hard flat elevated surface lol and used my body weight to pop it off. Next time I know better😂
Thanks so much! I manage Airbnbs and go thru floor cleaners like crazy! Being able to make my own solution will save a lot of $$$$
Thank you, super helpful!!! I bought the wrong refill and with your video, it didn't go to waste!
Thank You ! Also use reusable washable pads. Works fine!
I would use purified water, preferably RO water. Otherwise the tap water will likely cause scale buildup inside swiffer sprayer.
Plausible, though I wonder how many times you’d have to refill it before you’ve saved more than the cost of a new power mop
You forgot the part where you squeezed the bottle while turning to get the top off. Game changer.
Thank you soooooo much for this. Having to buy refills made me hesitant to buy the mop. Now, im glad that I did.😊
Glad I could help!
thank you sooooo much! My sister can't be around the smell of the original
yeah, we cant stand the smell of swiffer and febreeze as well. here lol.
Yes! Thank you also for posting this! I was curious about the rubber portion on the bottle that gets punctured, where the solution comes out of. About how many times can you refill a bottle before that rubber stats to fail? Thanks!
It’s ghetto but on the wet jet I make sure the silicone bit is dry and stick a square of scotch tape over it. It had previously started leaking and this stopped it completely. I just replace the tape when I fill it.
I mean you could probably get away a few refills and if you didn’t want to start over with a new bottle you can use rtv silicone gasket maker. It’s literally what it I made for and it will make a self healing hole like you see on the rubber stoppers on hypodermic injection bottles. You’ll get quite a few piercings and it’ll cost you about $4 to get enough rtv to make 2,000 of those seals. Just mke sure you store the open rtv silicone properly so it doesn’t dry out
Ps. I just bought one of these from Costco and haven’t opened it yet so I didn’t look at the seal yet, but I do know for a fact that rtv gasket maker will make a self sealing port. Just remember if the rubber bit is already silicone then silicone won’t stick to silicone and your seal will fail. If that’s the case you need to remove the seal and totally replace it with rtv. But it might not be silicone so I try before I went that far
@@michaelv1984how’s the rtv holding up so far?
The money you save on buying their solution will pay for another Power Swiffer unit if the warranty voids.
I also agree with Murphys oil soap. Been using it for years...for everything. I also add the water first. Loved the user's comment about using distilled water.
My bottle won’t click in. It will spray but also leaks a little around top. I soaked in warm water and also just twisted the top off without warm. Both will not click in
Mine also didnt click in
Try loosening the cap 1/2 turn. If it’s too tight it won’t click back in
Thank-you, thank-you, thank-you! Much more economical and eoc friendly.
I'm not a fan of Murphy, but, I love Spic-n-Span and Lysol. My beautifully clean floors thank you.
Thank you so much for the video because when I saw that it cost $10, and that in just one turn my husband spent half of the jar, I couldn't believe it.
Thank you! I really like the mop but HATE the smell.
agreed!!!
Gives me a headache!!
I have been looking for something like this for a long time. Thank you so much. This came after buying a double pack for $10.😅
Does anyone have any regrets using the power mop vs the older swiffer? I was able to refill the older swiffer liquids easily. Had one bottle for tile and one for wood. Pads on the older swiffer are cheaper and did the job just fine. Does the power mop pads clean that much better to make it worth it?
My wet jet bottles were Hella hard to open., I had to drill a hole in the top to refill it
Thanks for this video! I was in a bind, having just moved to a new place and really needed a hack on the power mop refill before the roommates got home. 😂 You are awesome 👏
Wouldn't the soap be more like 2 tsp to bottle of water?
He must have thought that 750ml was 3/4 of a gallon, rather than 1/5 of a gallon
This should’ve been a refillable bottle in the first place!!! Why do the Swiffer people hate the environment so much????
Unfortunately they love money more 😢
They don't hate it, they don't care
Thank you for this video, this is exactly what I was looking for! I just purchased a power mop and was wondering if it could be refilled!
Trying to force you to buy their refill bottles.
Thanks for this video and for the rest of your ur helpful comments ❤
Great vid! Do you have to rinse mopped floors after using your Murphy’s oil soap solution?
Good question!!
Just found out today that I could use a reusable mop pad from a mop that’s not even Swiffer on my Swiffer power mop due to the little Velcro pads. I’m stoked because we don’t have to keep buying the disposable pads anymore
Thanks saves me money. Nowadays everything helps.
I used a butter knife to prop it along and twist. Works like a charm
Thank you so much! Can I clip reusable towels instead of the disposable Swifer ones? If so, any suggestions?
Amazon sells them. They work. I usually soak in water before using them. They clean in the wash.
I wonder if the reusable bottle I have from my old dollar general mop would work for this 🤔
He used wood cleaner on tile floor. I've never done this, so before being critical about it, i need to ask if this works with the right water to oil mixture?
Thank you! The smell of their product is so overpowering and gives me a headache. Not to mention it would probably kill my parrots! We have to use natural solutions without perfumes for them.
Overtime this will brake your mop. It slowly leaks and jams the sprayers then they eventually won’t spray anymore.
Use distilled water, tap water can be too hard and that's why it clogs
What I would like to know is, can one use the pads for this machine on the original swiffer battery mop?
Just saved me money Thanks
What happens when the bottle refuses to click back in after it's refilled ? 😡
This just happened to me too 🙄 infuriating
Bruh yall have the same issue!!!!!! I don't know what to do!!!! 😢
Try loosening the cap 1/2 turn. Fixed mine!
Just mix a gallon and fill the bottle
Great video. I was debating whether to get this or not. One of my concerns was the continuous purchasing of cleaning solution from Swiffer. I also think there are reusable pads I can buy. I don't think I have any rechargeable AA batteries but that should be okay.
Amazon sells the reusable pads. They work.
To avoid screwing up the original outlet, maybe drilling a half-inch/inch hole in the bottom or bottom side of the bottle then filling up the solution and covering the hole with duct tape might avoid screwing up the cap. Might have to replace the duct tape every so often but who cares.
Thank you. Now I can get rid of that nasty smelling solution. It filled my house for hours and gave me an asthma attack.
Thanks for this video! It answered my question and you showed all the steps clearly. :)
Glad it was clear
Exactly what I plan to do after I use all of the product, I will refill it on my own
Thank you ❤
Love the mop but all sudden it won’t spray
Great presentation save everyone lots of money on refill bottles good DIY hack thanks a lot keep on cleaning.
Please help no matter what I do mine won’t click and it is brand new
same here!!!! it won't click into place and it's perfectly identical to the other bottle? going nuts! its not like it has a chip or something to know its being refilled!
Run it under hot water before you take off for about i minute❤❤❤
I’m having trouble too..won’t click back in. Was it manufactured to know some type of seal broken???
If you twist the cap to tight it won’t reclick ! Try untwisting it one turn and clicking it if it’s to tight it doesn’t leave room for the side clips to squeeze in and lock it in place
Anyone else figured this out? I did what he did but it won't click back in.
What Happens if I were to trim the nubs in the inside of the cap. Would its securely close still while allowing me to easily open it?
my husband suggested i use a nail clipper to trim those nubs... i dont know if they are necessary to keep it shuit- i wonder if just filing them down a bit would make it easwier (that thing is REALLY hard to open!) but soaking it in hot water makes it much easirde, no trimming needed... i just have my husband
oen it for me lol it makes me feel like a weaking, but whatever ;)
Did your solution foul the spray jets?? That's the biggest concern with using a DIY solution. Thanks for the video.
I was thinking of getting a second bottle and just putting plain water in it to flush the lines after each use of the diy solution and to remove the solution bottle when it’s not being used.
Question.... Do you have to rinse your MOS solution?
Suggestion???
Making Solution...To avoid bubbles....Why couldn't you put water to fill level, then pour out 1/5 cup of water and then replace with 1/5 cup Murphy's oil soap (or what ever you choose) then cap and invert softly a few times to mix ? Maybe avoid bubbles as much as possible.
That could work too!
Thank you! Very good tutorial, it worked great!
Mine was not sitting in place. I tried really hard to insert the refill bottle back. But it could not lock in. Anyone faced same issue?
Mr
Me
Hmmm mine won’t turn left. Only right when it gets stuck
Run it under hot water for a minute comes right off❤❤❤
Thanks I bought 5 bottles of wet jet and couldn't figure out why they made it not to have a refill way, especially since on plastic use❤
Thank you !!!!!! I can’t afford to buy these bottles all the time ! So much easier to make your own!! 2 dogs and horse no way I’m buying these daily lol
You are so welcome!
@@DIYLifeTech do you have a hack for the pads like washable type that match what they sell
@@susanabushaban2719 I think another company sells washable pads for sale on Amazon.
@@susanabushaban2719 i purchased microfiber washable pads on amazon D
Thanks a lot for this video. It really helped me today 🎉
Glad it helped!
Awesome, thanks!
I did this and my bottle leaks now.
Good because the smell of the swifter cleaning solution makes me gag.
Thank you
Has anyone tried using Swiffer Wet Jet solution, in their Swiffer Power Mop? As in pouring the Wet Jet solution into the empty power mop bottle
Wont stay clicked in just pops back out
Can't get the top off.
I take the empty bottle and fill a metal pan with two inches of water put pan on stove bring water to boil once boiling turn heat off put empty bottle the purple top of Swiffer into boiling water keep it in water 30 seconds after that take a wash clothes and purple top opens easily, put ur own solution in bottle then screw purple top back on till it snaps problem solved
Always pour water first
Thank you!
Thank you!!
Great technique
Most Excellent.
THANK YOU!!!!!!
Merci beaucoup, de nous montrer comment l'ouvrir la bouteille du swiffer power mop 🤘🏻🤘🏻🤘🏻🤘🏻🤘🏻🤘🏻🤘🏻
Wow… this guy has strong hands 💦
Works for me
Smart!
Thankyou Diy LIFEHACK
I will definitely take that risk to save money
DONT DO THIS!!!! After doing this three times my mop broke! 🤷♀️🤷♀️🤷♀️🤷♀️🤷♀️🤷♀️🤷♀️🤷♀️🤷♀️🤷♀️🤷♀️
The original solution has an awful, cheap, gas station bathroom smell
That’s part of why I make my own
😊
Thank you