Use to build speaker enclosures the same way 25 years ago made some awsome footwell pods door pods rear boot builds ...messey stinky itchy thank god dont do mess around now 😂
Thank you, i'm glad that my video helps, the process is a bit messy but it will be worht it in the end, you just have to have patience and don't give up.
I drive a lancer and I can't ever find lips for the bumper sides that come down. Looking to put lips under just them and leave the middle how it is. Thanks for the inspiration.
Appreciate the inspiration, I'm building a custom side louvers with my 3d printer they jus don't make em for my vehicle and I wantd to fiberglass them for durability the process uve shown has give me that extra pep I need to feel comfortable continuing if all works out I'm make rear window louvers and that will be epic I'd be the only 2017 ford.... with em 🤣🤣🤣
Needs some side skirts and that diffuser (assuming you also made that) needs to extend out to the whole side of the car so it lowers that rear another inch or two so the whole car is leveled out 😎
Question: by chance, do you the first part of the project recorded? Great work! I been doing things like this since the 80s to my (& friends) rides. The final results are so satisfying. Especially when people ask, who done the work? The look on their face when they found out I did was hilarious.
Wow that's awesome, i don't have the first part of the project, Unfortunately i deleted some videos because i made many mistakes and also i didn't want to make the video too long
Work os great, but I think lip is to wide it missmatch line of the car. If you made side lips to match wideness Its OK! However U really did a awesome job!
Gracias, bueno estoy planeando cambiarle el color al carro pero todavia no me decido que color, por eso lo estoy dejando asi como esta, yo se que se ve feo pero ese color es temporal nomas.
Enjoyed the video. I've been watching videos on making lip's, spoilers etc. Problem is I don't know how to start and what exactly Is I would need. Would you mind helping me out with a list of things that would help getting started? And where I could probably get fiberglass cloth?
Yeah sure, you can buy fiberglass on amazon or ebay, so this is what you need, ( fiberglass chopped strand mat cloth, fiberglass resin, Bondo body filler, chip paint brush, sandpapers, gloves and 3m paint respirator ) now if you wanna make a front bumper lip side skirts or anything, just watch a lot of different videos to get an idea of how you can start your project, that's my advice
Fiberglass Chopped Strand Mat Cloth, Fiberglass Resin and Hardener, WHITE GELCOAT NO WAX with Hardener, PARTALL FILM #10 (PVA) Mold Release Agent, MOLD RELEASE WAX, DING ALL Q-Cell Filler and Bondo Body Filler. These are all the products that i used
Wow this is so amazing I got so many great ideas from this. I've been trying to fabricate custom parts but using that mold release agent and gel to make your own is such a better idea. I just need to look more closely at what all materials you used and where do you get them?
The fiberglass, PVA release agent, mold release, and the Q-cell filler, i bought all this at Amazon and ebay and the rest of the stuff i bought them at the local store
Muchas Gracias, me tardé mas o menos como en 8 meses porque no lo hacía todos los dias, solo lo estaba haciendo en mis tiempos libres, pero si uno se enfoca muy bien y lo haces todos los dias, el trabajo talvez lo haces en 2 semanas
Styrofoam, fiberglass, fiberglass resin, bondo body filler, paint brush, masking tape and hot glue gun, only use this materials if you wanna make a mold, ( white gelcoat no wax, pva mold release agent and mold release paste wax )
Waw all you need to know about how not to make a front lip, perhaps some of the money wasted could have been used to replace the bald tyres on the car.
Use to build speaker enclosures the same way 25 years ago made some awsome footwell pods door pods rear boot builds ...messey stinky itchy thank god dont do mess around now 😂
Yeah that's the only part i hate about fiberglass, it makes you itch every time you touch it
@@chiquitademivida some skills you got buddy 👌
Thank you👍
11
@11chiquitademivida
Nice work brother. I just made a GT2rs style splitter for my beetle using similar technique. I was a it messier with the glue gun!
Thank you, i'm glad that my video helps, the process is a bit messy but it will be worht it in the end, you just have to have patience and don't give up.
Outstanding work and craftsmanship. Patience and attention to detail. Truly. When is the painted and completion video coming??
I don't know yet, i'm gonna start working on the side skirts now and after that i'm thinking about wrapping the car
Nice! Can't wait bro. Truly amazing work again. 👌 Looking forward to the next video.
Thank you👍
Good work, I’m going to be making one for my OBS Chevy in the spring and this really helped understand the steps!
Thank you and i wish you success with your project
7:30 what is present in that metal container you poured in that plastic bowl ??
7:41 what is present in those tubes
7:30 is fiberglass resin
7:41is a hardener for fiberglass resin, when you buy the fiberglass resin is already comes with the hardener
I was wandering where you were going with this when you started, but bro that is an outstanding job! A lot of work and attention to detail!! Awesome!!
Thank you
Something crazy 🤯🔥💝
nice dude, alot to be learnt from here thanks.
You're welcome 👍
I drive a lancer and I can't ever find lips for the bumper sides that come down. Looking to put lips under just them and leave the middle how it is. Thanks for the inspiration.
You're welcome
Hermoso trabajo tienes mucha paciencia
Muchas gracias mi amigo y pues no nos queda de otra 😂
Now this is the video I've been searching for. You saved my lip project!
I'm glad, i wish you the best in your project 👍
Sou seu fã. Fantástico trabalho
Thank you👍
Appreciate the inspiration, I'm building a custom side louvers with my 3d printer they jus don't make em for my vehicle and I wantd to fiberglass them for durability the process uve shown has give me that extra pep I need to feel comfortable continuing if all works out I'm make rear window louvers and that will be epic I'd be the only 2017 ford.... with em 🤣🤣🤣
I'm glad to hear that, i wish you success in your project
Needs some side skirts and that diffuser (assuming you also made that) needs to extend out to the whole side of the car so it lowers that rear another inch or two so the whole car is leveled out 😎
Yeah i made that diffuser too and side skirts is gonna be my next project, thank you for your advice i will keep it in mind 👍
Beautiful job very nice ❣️🙂 you are amazing with it
Thank you
Hayop si kuya! Galing!!
Thank you👍
Cara parabéns pelo trabalho muito da ora
Thank you
i thought polyester resin melted the xps? are you laying masking tape over the xps to prevent the chemical reaction? well done nicely made
Yeah use masking tape but aluminum foil tape works better so that the foam doesn't melt
Question: by chance, do you the first part of the project recorded?
Great work! I been doing things like this since the 80s to my (& friends) rides. The final results are so satisfying. Especially when people ask, who done the work? The look on their face when they found out I did was hilarious.
Wow that's awesome, i don't have the first part of the project, Unfortunately i deleted some videos because i made many mistakes and also i didn't want to make the video too long
Great job man
Thank you
Work os great, but I think lip is to wide it missmatch line of the car.
If you made side lips to match wideness Its OK!
However U really did a awesome job!
I did it like that because my goal is to make a wide body kit, but that's a good point thank you
Esta bacan,solo el color esta chillon,
Gracias, bueno estoy planeando cambiarle el color al carro pero todavia no me decido que color, por eso lo estoy dejando asi como esta, yo se que se ve feo pero ese color es temporal nomas.
It is necessary to mask the foam in order to apply the resin and the fiber to get a proper adhesion between those materials?
Yes, you have to put some kind of tape, otherwise the resin is gonna eat the foam, i recommend to use foil tape
Great great job
Thank you
Hi i'm from Indonesia😊
at first I thought..... naaaaah.... THEN in the End ... FUCKIN AWESOME JOB !!! 🙂
Thank you my friend
Enjoyed the video. I've been watching videos on making lip's, spoilers etc. Problem is I don't know how to start and what exactly Is I would need. Would you mind helping me out with a list of things that would help getting started?
And where I could probably get fiberglass cloth?
Yeah sure, you can buy fiberglass on amazon or ebay, so this is what you need, ( fiberglass chopped strand mat cloth, fiberglass resin,
Bondo body filler, chip paint brush, sandpapers, gloves and 3m paint respirator ) now if you wanna make a front bumper lip side skirts or anything, just watch a lot of different videos to get an idea of how you can start your project, that's my advice
@@chiquitademivida thanks very much appreciate the wisdom.
@@Eclipse_XVX 👍
We'll done my friend looks great 👍
Thank you
Сколько времени ты на это потратил бро?
It took me 8 months to complete the project
How much do you charge to make one for my 2006 cls 500
To make one for that car i need to have a bumper so that i can measure and i don't have that
@@chiquitademivida what state are you based?
@@19lol19 north carolina
@@chiquitademivida I'm in North carolina myself
@@chiquitademivida I'm in monroe, North
how long did it take you to complete the project
Like 8 months because i only worked on this project in my free time
Could you put the products to see the names
Fiberglass Chopped Strand Mat Cloth, Fiberglass Resin and Hardener, WHITE GELCOAT NO WAX with Hardener, PARTALL FILM #10 (PVA) Mold Release Agent, MOLD RELEASE WAX, DING ALL Q-Cell Filler and Bondo Body Filler. These are all the products that i used
Ebay can also👍
amazing job
Thanks
Wow this is so amazing I got so many great ideas from this. I've been trying to fabricate custom parts but using that mold release agent and gel to make your own is such a better idea. I just need to look more closely at what all materials you used and where do you get them?
The fiberglass, PVA release agent, mold release, and the Q-cell filler, i bought all this at Amazon and ebay and the rest of the stuff i bought them at the local store
@@chiquitademivida okay cool thank you I'm going to try this idea making parts this way. I've tried it several other ways not working too well.
You're welcome 👍
This is badass! He should make a mold and sell those puppies for $800 a pop considering it fits a Benz!
Not a bad idea👌
Hard work huh? Looks good. It's my next project for my Cadillac ATS.
Yeah and you just have to have patience because it takes time, i hope everything goes well in your project and don't give up
👏 perfect perfect 😎✌🇧🇷
Thank you
👍👍👍👍👍👍
Buen trabajo, cuánto tiempo te tardaste en hacer ese Spoiler delantero, saludos 👍🇲🇽
Muchas Gracias, me tardé mas o menos como en 8 meses porque no lo hacía todos los dias, solo lo estaba haciendo en mis tiempos libres, pero si uno se enfoca muy bien y lo haces todos los dias, el trabajo talvez lo haces en 2 semanas
@@chiquitademivida te quedo muy bien, gracias por responder👍🇲🇽
Para eso estamos amigo👍
What's the white material?
It's called " Gelcoat " that's the name of the white stuff that i spread on the bottom of the bumper, i don't know if that's what you're talking about
Hello men, what was the white thing that you spread on the bottom of the bumper?
It's called gelcoat, use gelcoat only when you make a fiberglass mold of something, like car parts or anything
Donde radicas , me gustaria mandar hacer un kit para mi troca
En norte carolina
Yo tambien en wilmington North Carolina
💪🏾
👍
Eso es todo
Eso si 👍
Absolutely great skills that didn't do the car any good esthetically
Thank you for your comment
what materials did you use?
Styrofoam, fiberglass, fiberglass resin, bondo body filler, paint brush, masking tape and hot glue gun, only use this materials if you wanna make a mold, ( white gelcoat no wax, pva mold release agent and mold release paste wax )
@ okay thank you
What is the thickness of the styrofoam?
1.5 CM and the 2 big ones that i used on the sides is 5 CM
Que talento
Si verdad? Gracias 🙂
No haces para vender me gustaría que me hicieras para mi toyota camry se 2016
No es mala idea pero para hacerlo tengu que tener el bumper del carro para tomarle las medidas porque cada carro es diferente
How much would you charge to make one?
Idk, maybe $200 idk yet, probably i will make one in summer to sell it
@@chiquitademivida where are you located
I’m in Cali do you have email or phone
Hella clean, how’s it holding up so far?
Very good so far
.🔥🔥🔥🔥
Come lavoro sei stato molto bravo per non sta bene pero niente sull Auto😔
Thank you for your comment
I got a set of brand new carbon fiber fenders for your car....
I'm looking for a wide body kit fender flares
سلام
سلام
Ну вот ещё маден ин копут бамперу он сейчас забется грязи
Waw all you need to know about how not to make a front lip, perhaps some of the money wasted could have been used to replace the bald tyres on the car.
You're right lol, but that's how you learn, you have to spend money and time
😠 ρɾσɱσʂɱ
quitanieve??? tio no sea ridiculo ...es muy basto...
Si lo se pero es un trabajo que no esta terminado, siempre se puede hacer mejoras, comoquiera gracias por tu comentario
Цвет вообще ни в тему
Always laughing on peoples who make tuning on bad maintained or rusty cars, polish you headlights at least🤣
No i'm just gonna buy new headlights😂
It"s ugly
For now, it might look different when it's finished
Mucha verga para dejarlo pegado en una paral de parking 👎
Si lo sé mi amigo pero todavia esta en proceso el proyecto
Лютый колхоз