Led tube light की fuse smd led change कैसे करें

Поділитися
Вставка
  • Опубліковано 6 січ 2025

КОМЕНТАРІ • 46

  • @shakeelsheik6921
    @shakeelsheik6921 2 роки тому

    Good and clear information, thank you Sir

  • @gamingstar717
    @gamingstar717 2 роки тому +1

    Very💯 nice

  • @ranjitbhattacharjee9140
    @ranjitbhattacharjee9140 2 роки тому

    very good video thanks bhai

  • @gamingstar717
    @gamingstar717 2 роки тому +1

    Namaskar sir

  • @iot_enthusiast
    @iot_enthusiast 2 роки тому +1

    Thank you for the video. how do we refill the Torch light ? Please provide purchase link to refill - thank you!

  • @niranjanmajhi129
    @niranjanmajhi129 2 роки тому

    Very nice 👌

  • @rameshsawant2512
    @rameshsawant2512 2 роки тому +2

    Very good video sir. One ? Which stand u used to hold LED strip.? Previously i worked as a computer network security engg, now I am somewhat physically disabled, but I am fond of electronics and want to start some electronic work and may require some elec components which I want to purchase from u so I am watching your videos regularly before going ahead i am curious about all this thanking u for this video and many other videos of u

  • @raghvendrakushwah219
    @raghvendrakushwah219 Рік тому

    Thanks bro !

  • @badrinath6059
    @badrinath6059 4 місяці тому

    Sir ji,can you please explain what is the difference between 5630/5670 (3 Volt 0.5 watt) & 3528 (3 Volt 0.5 watt),thanks in advance

  • @gopalsinghverma1843
    @gopalsinghverma1843 Рік тому

    Ye LED tubelight or bulb kahan repair hoti hain ? Please batayen. 💐

  • @krishnagopal3734
    @krishnagopal3734 2 роки тому

    Nice video, fiber strip me led kaise replace karnge.

    • @TechToolsElectronics
      @TechToolsElectronics  2 роки тому

      fiber strip में smd ko safely remove krne ke liye smd rework station ka use kya jata hai...

    • @krishnagopal3734
      @krishnagopal3734 2 роки тому

      @@TechToolsElectronics Thank You

  • @shel1282
    @shel1282 Рік тому

    Ye strip kitna tak bend kar sakte hai

  • @shafiqansari4344
    @shafiqansari4344 Рік тому

    T5 led tube ligth mein kitnein miliampere ki smd lagayein.

  • @nayanjagirdar8408
    @nayanjagirdar8408 2 роки тому

    👌👌👌👍

  • @shamshadtrainvlogs
    @shamshadtrainvlogs 2 роки тому +1

    40 watt ka tube light hai jiska output ka capacitor 2.2uf 400v capacitor ke jagah per 6.8uf 400v capacitor laga sakte hai kya.

    • @AMAN--gp9xb
      @AMAN--gp9xb Рік тому

      Volt same hona chiye ba uf kuch b ho chlega

  • @ashokbhaiashok2403
    @ashokbhaiashok2403 2 роки тому

    Sir agar 1 tyublight me 5 led jal gai hai to dusri kharab tyub light ki 5 led 1 sath katkar wayarse solding kardenge to chalega Kya?

  • @it_geek
    @it_geek 2 роки тому

    sir where to buy these new SMD LEDs? Agar kissi purane bulb or tube mein se use karna tu kaise pta kar sakte hai ke yeh 0.5 or 1 watt hai

  • @haridasvishwakarma3066
    @haridasvishwakarma3066 2 роки тому +1

    Sir ji led ka plus wire track ukhad gaya he Sir ji plus wire kaha lagae

    • @TechToolsElectronics
      @TechToolsElectronics  2 роки тому

      Led strip ke opposite side bhi connection point hote hai usme connection kr do

  • @dulalmajumder4917
    @dulalmajumder4917 Рік тому

    I hv an led tube panel where one part 25 smd (last part) is not glowing even after replacing by 5mm led. Can u plz advise how to repair ???

  • @mohidinimtiyaz1838
    @mohidinimtiyaz1838 2 роки тому

    One or two smd led not glow can I shot negative & postive each other.

    • @TechToolsElectronics
      @TechToolsElectronics  2 роки тому

      Jis section ki smd short kroge uspe current extra jayega jsse uski dusri smd fuse ho jayegi... isliye smd replace krna jruri hai

  • @Brexieditor123
    @Brexieditor123 2 роки тому

    sir meri shbhi led kharab ho gayi hai to kya karen dusri led nhi lg sakti h kya

  • @laxmanmhatre6263
    @laxmanmhatre6263 Рік тому

    अगर एक नंबर वाली स्ट्रीप की एल ई डी खराब हो गयी है और स्ट्रीप काट डालकर आगे स्ट्रिप साॅलडरींग कर सकते हैं क्या

  • @bhanuprakashap.t8708
    @bhanuprakashap.t8708 Рік тому

    Driver ka output kitna voltage sir?

  • @MOHITSHARMA-wn5kf
    @MOHITSHARMA-wn5kf 2 роки тому

    Sir,,, hamari led tube light high voltage aasman ki bigly girne se kharaab ho gyi hai kese repair kre

  • @kanchankondhare
    @kanchankondhare 2 роки тому

    🙏💓💓🙏

  • @MohanLal-tw5gb
    @MohanLal-tw5gb 2 роки тому

    Smd led ka + _ Kesay pta karkay lgayan.

  • @singhasankumarsahani6758
    @singhasankumarsahani6758 Рік тому

    Smd led kahaa de kharide nahi mil Raha rahaa hai

  • @manjeetkapoor5105
    @manjeetkapoor5105 2 роки тому

    Sir mere se strip break ho gayee hai upar ki chaar led se

  • @sachinsharan1
    @sachinsharan1 2 роки тому

    अगर LED ना हो तो उस जगह resistance लगाना सही होगा या short करना। और resistance कितने का लगा सकते हैं।

    • @TechToolsElectronics
      @TechToolsElectronics  2 роки тому

      पुराने led bulb की mcpcb se same smd led निकाल कर use कर सकते हो otherwise 10 ohms 1/4 watt की resistance use कर सकते हो अगर आप smd led हटा कर उसके pads को short करते हो तो जिस section में आपने shorting की है उसमें current सबसे ज्यादा जायेगा जिससे उसी section की कोई दूसरी smd led fuse हो सकती है

  • @danilomendoza4518
    @danilomendoza4518 Рік тому

    Pls.include English translation

  • @gafoorqaudri6666
    @gafoorqaudri6666 2 роки тому

    Laga te waqt Led chip Ka negative positive kaise lagaya Jaye nahin bataya aapne

  • @BabuKhan-blog653
    @BabuKhan-blog653 2 роки тому

    सर जी आप पुरानी वीडियो को फिर से डालते जाओ सारी वीडियो led बल्ब और ट्यूब लाइट बाली मतलब रीलोड करो

  • @AshokKumar-xm6gj
    @AshokKumar-xm6gj 8 місяців тому

    कैसे पता करें कि कितने वाट और कितने वोल्ट की smd है?

    • @TechToolsElectronics
      @TechToolsElectronics  8 місяців тому

      Watch video link below...
      ua-cam.com/video/xle1vna-gwA/v-deo.html

  • @mohammadanas2562
    @mohammadanas2562 2 роки тому

    Smd led ka number?? 2835 or 5050