Ned Dunphy's 6.40 at 236mph in the 1/4 mile SMX Tear Down and Build After Drag Week Glory
Вставка
- Опубліковано 1 жов 2023
- Check out the Datalog from the broken piston in this video: • Traction Control ! Ba...
SME Merch! www.stevemorrisengines.com
To Become a Channel Member - / stevemorrisracing - Авто та транспорт
You are an amazing guy Steve, just remember, dont kill yourself to make sure everyone else is good. You deserve some time for yourself as well.
I thought the same however owning a business that’s your passion is all consuming .
AYE
Seen too many people ,work themselves into oblivion
he wouldnt do it with out being paid for his time
As long as he does what he loves, he will never work a day in his life.
As an engine builder for 35 plus years of Diesel engines, I have always been a huge fan of the Detroit Diesel International compound #2 aka peanut butter Glad to see you using it as well!
The way you had to twist and pull that inner spring around the retainer piece, the inner spring saved him a major rebuild
The mains look brand new, very impressive
I have never seen a guy so happy after blowing the top off his intake and destroying a carbon fiber front end like Ned
Some say they're surprised that these engines can make so much power but it's the street driving that breaks stuff. It makes sense to me. The long sustained run time while driving is hard on things whereas a race the engine may run for 3 minutes max from start to finish. 5 hours straight run time is incredible and the fact that there wasn't more severe damage is a true testament to how well your engines are built and designed. Your the man Steve!
Rockin' the Dewey shirt today. 😎👍
Still the only channel I support financially,granted it’s not much in the big picture,but being a DVET ,on disability and bed bound, it says a lot about how much I enjoy watching his channel, he seems to have a great personality & really knows his stuff, as a ex tech I miss wrenching the smell of race fuel,& the bits of rubber all over your shirts, this channel helps to give me a break from the Monday of being bedridden..keep up the great work !
Thanks, take care.
Thanks for your Service and Sacrifice!!! You are a True Hero!!!
LOVE this channel. Thank you for showing so much behind the scenes content. Couldn't ask for anything more so thank you for recording, editing, posting, all of it. Impressively educational content so again, thank you.
This is my favorite channel by a mile. Thanks for giving us an inside look at these amazing machines.
The way you teach without teaching and have an ingrained attention to detail, no matter how small, is what makes me keep coming back to watch you work. I've never watched one of these video's and not learned at least 1 or 3 things
Don't forget to update us on the oil analysis, please! Thanks Steve, always enjoy your videos and your passion for taking care of your products and customers.
These SMX’s look like diamonds ! And the man behind them is a Genius ..❤
I really like the way you explained the math.
Let’s go Steve you are the man !!! Always the best customer service ever !!! God bless brother thank you so much for your dedication to make motor sports/ Drag racing to the next levels!! And reliable!!!
Well done loved tear down music.. lucky Ned.
That's just unbelievable that held up.
Those engines are a thing of beauty!
Steve ..just a thought but I'm pretty sure his springs in the viper are breaking because that engines been sitting for 3 ish years well everything was being built wonder if they were under tension the whole time.. you saw what some slight corrosion can do in Bailey's engine when he didn't take care of it
I learn so much here. Thanks!
Finally some good time lapse music . Thanks very much
Awesome episode, beautiful shop with amazing staff and equipment. Thanks for sharing
Love your builds and in depth videos mate 👌
Thanks for Another great lesson and video !!! Love the tech side Awesome Job !!!!!
I love watching you work sir, your an absolute legend and your engines are absolutely amazing, I love the amount of detail you put in to make sure these engines are as tough and powerful as can be. I love it! Keep up the good work
I love Ned’s attitude!
Thanks for the lesson.
Absolutely love videos like this! You're such an amazing person!
Good video work and story telling.
My favorite UA-cam channel by far!!!!!!!
Awesome job Steve!
Holly crap that exhaust valve was running on hopes and dreams! It’s amazing it didn’t grenade itself. 😮
Steve, yer smashing it out the park with these vlogs!
Much respect to you buddy. 🛠
Thank goodness he didn’t full send that viper. With the broken spring.
Great video.
As always very nice work Sir
Good job Steve!
Super busy yet you still find time to give us a 40 min vid 👍👍 Much appreciated as always.
The carboard came off and i just started chuckling in amazment to those ports. Beautiful 😮
Hey Steve, great time-lapse music! 👍
hay steve for sometime I used to just look at the outside of cars but I must say your engines are a thing of beauty a masterpiece
I love your work so much steve, you are the magician of motors......
Great video as always
My #1 Steve Morris 🇱🇷💪😁
Love watching buddy thanks for sharing
Your awesome steve morris 🎉🎉🎉 thanks for the awesome tear down and build God bless brother
Wow, you put that together fast. It is amazing there wasn't more damage to the cylinder considering all we saw him do in the videos of the competition and as fast as that car was running. Good Job Steve.
Keep up the great work!
Can’t wait to see that viper running more.
And it’s fun to see the competition with your own engines…
Showed up for the Dewey content and was NOT disappointed. The engine stuff is always good too but Dewey takes center stage. 😃
I know right. Between Steve’s channel and CEE Australia for their dog “Homeless”. Great channels and amazing information just like Steve.
You are awesome love the content keep it coming 👍🏻👍🏻
Damn they must have had an angel sitting in the back 👍
That little work tray deal that sits on top of the intake is pretty slick!
I’m no mechanic by far! Rebuild my 2 strokes! I’ve learned so much from your videos! Thank you very much
I remember from another video you did about how many pounds of pressure is on the exhaust valve when it opens so thats really amazing it didn't tear up the engine.
Steve, dude i LOVE watching your channel. I'm no engineer or engine builder or even rebuilt my own engine but watching your channel has shown me things i enjoy watching like anything mechanical. Keep on keeping on brother. I drive a 95 F250 4x4 with the 5.8l Windsor and would like to get a little more hps out of it. I've got a set of factory heads that I've ported and have a set of gt40 heads that i also ported along with the original lower intake that I also ported and port matched. Im a little scared to install because afraid of fucking something up. I don't have money to replace the engine if need be and don't know what to do.
I always enjoy the hell out of your videos
Love watching your videos Mr. Steve, I haven’t worked on any HotRods in about 10 years, I do HVACR work, Plus LOL I got Married!!! Watching your videos have given me that Compulsive Nonstop Thinking About building another Car that I haven’t had in a long time!!! Can’t wait to see Sugar Mama’s next Video.
Great video 👍
Cool video thanks for sharing
Amazing shop full of amazing skill supervised by an awesome dog. :). Great video.
I enjoy your basic math principles, my brain does the exact same thing with just about everything in life. Nice vid
That's one Sick engine right there👍
Your rock Steve!!
Steve Morris, u ain't no joke brother! I hope to get to meet u one of these days!
Ned is running an MM transmission like Cleetus…both have an issue with the thrust? Interesting.
Good thinking.
Absolutely the most perfect way for it to break. That is crazy.
The street usage for that amount of time is astounding.
That retainer had of held on til the last second...insane that piston is perfect.
If I could ever afford any engine of this magnitude it would definitely be A SMX! Great work Steve Morris
@@prototribal4659 oh yea? What’s that mean
Lash cap saved the day
true testament on you bro.
Steve, I love your videos and your engines!! You are a brilliant man. Please hire an editing team for your videos. This is not meant with any disrespect.
As an example- we watched you do the math on neds 2000rpm for 5 hours =300 000 times the exhaust valve opened. Then just a few seconds later in the video you are bringing it up again. I understand that the 2 parts may have been hours or even days apart for you, but an editing person or team would keep the video flowing smoothly and make sure all parts have music.
Again, I love and am always learning things from you. Thank you!
Another amazing video,you really take care of your costumers….😎
I really liked the music choice @ 33:00 to 35+ That was an experience...
It just goes to show you Steve how good your engines are. 🙏🇦🇺👨🏭
👍 thanks for the video
Eric's shop is less than two miles from my home, and he's heck of a nice young man.
He's worked on my old F250 7.3 several times.
Glad to see he's gotten back in the car, because I thought he was taking indefinite break from racing here while back.
But I don't keep up with the racing style he does, too much TV drama for my taste..
Not saying them boys don't run hard, just that it's too commercialized for me.
Mr. Steve, the way you bend over backwards for your customers, is exactly why your customers come back every time they need something bigger and badder, because you stand behind your work regardless.
Plus you tare it down to see what failed, so that you can improve anything that shows to be a weakness in your design, are anyone else's honestly from what I've always seen.
So your work is proof of how much it matters that you supply your customers the very best your abilities, and I believe that you even update their engines once you develop improvements.
Sick video
A true artisan in engineering and in engine building, a master at his craft.
If he was to have a title it would be Professor Steve Morris PhD.👍👏👏👏
Ned needs a sponsorship from the people that make duct tape....... When they said a 1001 uses they were not joking.... 🤣😂
"I have now Idea how it stayed in there and ran like that" It's because you built a STOUT powerplant Steve!😂😂 Love all the content!
Could you imagine if you could engineer those engines to run with broken parts? You could charge double.😅
He did ! It Did !
@@prototribal4659 First invented in the 1930s to reduce the noise from older mechanical lifters, hydraulic lifters are the most common variety of lifter on the market. However, because of their higher cost, they didn't enter the mass market until the 1950s.
Steve, it occurred to me watching your video, that with the distributor hole in the front canted to the side like a Chrysler, you should design a set of billet Hemi water heads for your SMX block... Would be so cool
I’m loving my freedom piston prod fist shirt , thanks BigAl California oh I dropped on half of my number one cyclinder valve retainer and drove it 100 mile before it let go and pushed a valve thruogh block lolthanks BigAl California
from one man to another..... that a nice set of stems you have there .... 😆😆😆😆😆
I love the blue. Sick.
Show's you Steve , YOU know how to build them bullet proof !!!
The exhaust gas pressure / flow will help to close the valve with the inner spring keeping the valve stay closed during compression and power stroke. Sort of like the desmo valve system in some older Ducatti bike engines, and some old GP engines to eliminate valve float.
Steve!! I love all your vids! You da man! The big nasty boosted stuff is just mind blowing, thanks for sharing your world like you do!!
I had a thing pop into my head about dropping valves. Could a small o ring, or piece of latex tubing be placed on the valve stem to prevent the drop?
Awesome engines
Hi Steve, awesome video. I can’t believe how open you are to sharing your experience with us. I was wondering if you found the issue with the Torrington thrust bearing overheating? Was it a lubrication issue? Is that bearing fed oil through the crank or a squirter or do you rely on splash? Ps what was the big announcement?
As hard as he ran during that week, I believe Ned sees the advantages of having spare parts on hand. Good to get a Dewey fix, great customer service
Sad we didn't get to see Steve's wagon in action. He was on crew chief duty...
Love the videos especially the super technical videos especially on cutting valve seats and cutting fire ring groves in the block and head assemblies. Question can your seal a head to a block using a conical seal not unlike a poppet valve seat per cylinder?
Love your thumb nail. And yes I did learn something. I can’t afford to play with you guys 😢.
Very cool it scares me everytime I listen to your intro and you say caution you might learn something my brain can't comprehend everything that I have learned watching your videos I'm not a computer stop before you blow my mind up lol now let's get down to business the reason why the valve never dropped down in the piston is because Ned has such positive attitude he's like the coolest get er done he goes with the flow
Thanx Steve! Sometimes things are stranger than fiction? J
Best Milwaukee commercial I've ever seen 😂
195 👍's up Steve Morris thank you for sharing 🎉😊
Steve it is also testament ot just how strong and well built your Engines really are the Fun facts is a show stoper to know that 16000 times per it goes up n down just full on right there and drove some 100 odd miles give or take as we are not sure on the drive when it let go even so what an engine package Cheers
I am wondering what the oil analysis turned up for this engine and what changes might have been made for the front roller Torrington thrust bearing that showed a heating issue? I know you said that the oil had a distinct smell and that oiling issues cause wear in an engine.
someday I will drink a beer with the best engine builder,
Totally awesome
Steve thats one of those things that only the good Lord can do for you, Be thankful your one of his kids. Always love your content,