Amazing video, simple, well explained, straight to the point. Thanks for making UA-cam a better place for these types of videos :) Also thank you for not putting video ads inbetween! :)
Thanks so much for the video! I’m planning to migrate our custom automation system to KNX, then use Home Assistant as the server. This video is a great introduction to the process. And perfect timing for me.
Thankyou so much for this. I was ab le to setup home assist within a few hours with my KNX system thanks to you. Excellent tutorial .. easy to follow .. Subscribed !!!
The group addresses are required in order to integrate KNX in Home Assistant. Philips Hue are auto discovered in Home Assistant so there is no need to edit the yaml file.
Hi, thanks for this great video. I'm following these steps to go to the next level with my home automation project. The core of my house is KNX. 2 questions I had: 1) I didn't get why there are different group addresses for the switches... Are these power plugs? 2) Where do I find the IP address of my KNX IP interface? thanks for the help!
1) These are the Group Addresses from ETS. From more details check this video : ua-cam.com/video/WxD8TScEAP4/v-deo.html 2) From ETS5 you will be able to find the IP address of the KNX IP interface. Otherwise you could use an IP Network scanner like Advanced IP Scanner.
Λατρευω τα βιντεο απο οταν μου βγηκε ενα office network setup και θελω απο τοτε να ρωτησω σχετικα με την αλλαγη router γιατι θελω να κανω host στον παλιο μου υπολογιστη αλλα με προβληματιζει η αξιοπιστια του router απο τον isp οταν βρισκονται ολοι στο σπιτι . Επισης το router χειριζεται και το τηλεφωνο υπαρχει κατι που πρεπει να προσεξω ή καποιο recommendation ;
Εμείς αυτό που κάνουμε συνήθως είναι να αφήνουμε το modem του ISP για το Internet και την Τηλεφωνία αλλά και για να είναι εύκολη η βλαβοληψία, (δηλαδή σε περίπτωση βλάβης βγαίνει άκρη μόνο όταν υπάρχει το modem του ISP!!!) και μετά χρησιμοποιούμε ένα Router που όπως έχεις δει από τα video μας είναι συνήθως UniFi χρησιμοποιώντας PPPoE pass through για να αποφύγουμε το double nat (διπλά port forward κτλ).
Great video! I've tried to run HA on different RPi's and with different SD cards but it always runs slow and crashes often. Ordered another new SD card and a new power supply. I hope it works this time so I can finally get my KNX devices in HA! Your tutorial will help!
good evening, congratulations for the explanation and for the time dedicated, I watched and re-watched the video to try to connect my KNX equipment with home assistant as you specified .... but I still can't complete the job ... has by chance an email to be able to forward my problem and the various messages on the log. Thanks in advance
Indeed excellent tutorial to the point! Good job. Which KNX IP gateway would you recommend besides the WEINZIERL that is compatible with Home Assistant and also other automation hubs like Homey ?
Is it possible to ad Philips Hue lights in the config to be able to control? I ha e a older Master Link Gateway from Bang&olufsen. It has not support for Philips Hue natively but it has support for KNX. And I have Home Assistant running as well.
Thank you so much, good tutorial. When installing a KNX system, can a system be installed with Home Assistant or OpenHAB without ESP software? Can you make a video about the KNX system with OpenHAB? Thanks.
I loved your video and found it very useful connecting my KNX to Home Assistant, but do you have an example of how to connect/configure a KNX RGBW (MDT) controller?
Looks cool, ty. I'm planning to integrate my KNX modules to Home Assistant soon. One question though. I'd like to use a laptop instead of RPi. Is it possible to integrate KNX to Home Assistant Container or do I need to have Home Assistant Supervised?
Hi. Do you know something about possibility to use home assistnat with knx integration and voice control from google? It could be the cheapest way to use it together.
Google Assistant is supported by Home Assistant : www.home-assistant.io/integrations/google_assistant/ I haven't tried it yet with KNX but i will try it and maybe i will make a video for it!
I have followed your wonderful video until I reached the restart of server. I got a message”connection lost.restarting” after few seconds homeassistant war restarted but when I pressed the overview button, nothing was displayed, although I had yalm file for lights
Hi there, brilliant video, thanks ! Just ordered Weinzierl 773 and a new SD card to take up KNX integration. Would Visual Code Studio have any benefits as an (config file) editor over File Manager?
Maybe you can do it by using something like that : www.weinzierl.de/index.php/en/all-knx/knx-module-en/knx-baos-module-838-en We are testing it at the moment and when we are ready we will make a video about it!
We have 2 videos with integration between KNX and Apple Home Kit using : 1Home : ua-cam.com/video/HwQQjUIlcSo/v-deo.html Thinka : ua-cam.com/video/GSSS4CLaMhA/v-deo.html Later this year we will make also for Home Assistant.
Hi, thank you for the great video👍 Do you have a timelag between switching the light in HA and the light go on in real? Did you have complex scene's which you switch over HA? Here any timelags? Greetings from Germany ☺️
Thanks for the useful video, could you please share with us the rest API's of knx ip router if we would like to access it from our own mobile app (to integrate our mobile app with knx system), thanks in advance
Hey, very good video and very helpful, but my code gives a error: -name: "example" address: "1/1/1" state_address: "1/1/1". "Bad identation of a mapping entry in line Example, column: Example" Can somebody help me?
Ti raspberry πρεπει να το βαλω μαζι με το IP Router μεσα στον πινακα; Δεν εχω μεγαλο πινακα αλλα εχω 1-2 σημεια που εχω εξοδο ΚΝΧ καλωδιο. Μηπως μπορουσα να το βαλω εκει;
Το Raspberry δεν χρειάζεται να είναι μέσα στον πίνακα το συνδέεις απλά στο τοπικό σου δίκτυο με ένα καλώδιο UTP. π.χ. σε ένα Switch ή απ'ευθείας στο Router σου. Οπότε το Raspberry και το KNX IP Interface/Router συνδέονται μεταξύ τους μέσω δικτύου.
Amazing video, simple, well explained, straight to the point. Thanks for making UA-cam a better place for these types of videos :) Also thank you for not putting video ads inbetween! :)
Thanks so much for the video! I’m planning to migrate our custom automation system to KNX, then use Home Assistant as the server. This video is a great introduction to the process. And perfect timing for me.
We are glad that it could help!
Thankyou so much for this. I was ab le to setup home assist within a few hours with my KNX system thanks to you. Excellent tutorial .. easy to follow .. Subscribed !!!
You're welcome! Thank you for your comment!
Hi, if you use Phillips hue, do you still need a switch aktuator for lights in order to set the individual adresses? Thx
The group addresses are required in order to integrate KNX in Home Assistant. Philips Hue are auto discovered in Home Assistant so there is no need to edit the yaml file.
@@PoseidwnTech thx
Μπράβο, πολύ ωραιο tutorial....
Hello. Is Raspberry+KNX Home Assistant = alternative of Control4 ?
Hi, thanks for this great video. I'm following these steps to go to the next level with my home automation project. The core of my house is KNX. 2 questions I had:
1) I didn't get why there are different group addresses for the switches... Are these power plugs?
2) Where do I find the IP address of my KNX IP interface?
thanks for the help!
1) These are the Group Addresses from ETS. From more details check this video : ua-cam.com/video/WxD8TScEAP4/v-deo.html
2) From ETS5 you will be able to find the IP address of the KNX IP interface. Otherwise you could use an IP Network scanner like Advanced IP Scanner.
excellent video! my first on hass and I quickly integrated my first KNX lights. Complete video is accurate in every way! well done and thank you !
You are welcome! Thank you for your comment!
Λατρευω τα βιντεο απο οταν μου βγηκε ενα office network setup και θελω απο τοτε να ρωτησω σχετικα με την αλλαγη router γιατι θελω να κανω host στον παλιο μου υπολογιστη αλλα με προβληματιζει η αξιοπιστια του router απο τον isp οταν βρισκονται ολοι στο σπιτι . Επισης το router χειριζεται και το τηλεφωνο υπαρχει κατι που πρεπει να προσεξω ή καποιο recommendation ;
Εμείς αυτό που κάνουμε συνήθως είναι να αφήνουμε το modem του ISP για το Internet και την Τηλεφωνία αλλά και για να είναι εύκολη η βλαβοληψία, (δηλαδή σε περίπτωση βλάβης βγαίνει άκρη μόνο όταν υπάρχει το modem του ISP!!!) και μετά χρησιμοποιούμε ένα Router που όπως έχεις δει από τα video μας είναι συνήθως UniFi χρησιμοποιώντας PPPoE pass through για να αποφύγουμε το double nat (διπλά port forward κτλ).
Great Tutorial, but somehow, my home assistant cannot recognize. I am using the thinknx . Do you have any idea why
Thanks for your help
Congrats, excelent. I´d just like to know, if i wanted to connect to apple home kit how would i do ? I only install home kit in home assistant ?
Go to Settings --> Devices and Services and configure HomeKit! Maybe we have to make a video about it!
Excellent tutorial. Thank you very much!
You're welcome! Thank you for your comment!
Great video! I've tried to run HA on different RPi's and with different SD cards but it always runs slow and crashes often. Ordered another new SD card and a new power supply.
I hope it works this time so I can finally get my KNX devices in HA! Your tutorial will help!
The same hapened to me, then i change to an usb of 32 gb and all problems go away
@@armando08011971 Thanks for the tip! I'll try that next!
We didn't face any problem so far. We have tried HA in several Raspberries Pi 3B and we are using SD Cards from Sandisk.
Εχεις μηπως χρησιμοποιησει το baos module της wienzierl για επεκταση σε raspberry pi για να δεις πως λειτουργει?
Δυστυχώς δεν έχουμε προλάβει να το δοκιμάσουμε!
Αν στο μελλον εχεις χρονο κανε ενα βιντεακι!
good evening,
congratulations for the explanation and for the time dedicated, I watched and re-watched the video to try to connect my KNX equipment with home assistant as you specified .... but I still can't complete the job ... has by chance an email to be able to forward my problem and the various messages on the log.
Thanks in advance
Indeed excellent tutorial to the point! Good job.
Which KNX IP gateway would you recommend besides the WEINZIERL that is compatible with Home Assistant and also other automation hubs like Homey ?
Is it possible to ad Philips Hue lights in the config to be able to control? I ha e a older Master Link Gateway from Bang&olufsen. It has not support for Philips Hue natively but it has support for KNX. And I have Home Assistant running as well.
Home Assistant can auto discover Philips Hue so it is very easy to add them in Home Assistant.
I have two knx interfaces. one for my home and one for my workplace each with a different ip address. Can I combine there into one homeassitant setup?
I don't have an answer for that. I will have to try it first.
I tried to add virtual knx(kv) like that. It works a bit but then catches knx epilepsy :)
Thank you so much, good tutorial. When installing a KNX system, can a system be installed with Home Assistant or OpenHAB without ESP software? Can you make a video about the KNX system with OpenHAB? Thanks.
KNX devices require ETS Software for programming and configuration. Open Hub video is in our plans, so stay tuned!
@@PoseidwnTech Can we programming or using KNX devices with openhab or Home Assistant, without ETS software?
hi, great video but i still don't understand were and why you used the raspberry???
I used the raspberry to install Home Assistant. The raspberry will act as a server for the KNX installation.
@@PoseidwnTech Uau!!!!! so whith this, you do not need to spend a lot of money in an 1home knx!!!!!!!! congratulations!!!!!!!!!!!
Can we use USB Interface instead of IP Interfac?
I haven't tried yet, but it seems more complicated.
can we attach this home assistant over ALEXA or GOOGLE Assistant (voice control)
Yes you can but you will need a subscription to Nabucasa : www.nabucasa.com
I loved your video and found it very useful connecting my KNX to Home Assistant, but do you have an example of how to connect/configure a KNX RGBW (MDT) controller?
Thank you for your comment! Unfortunately i haven't tried it yet. I will try to make a video about it.
@@PoseidwnTech Thanks, I'm looking forward to it as I have two RGBW controllers to integrate in HA.
Superb tutorial, thanks alot!
You are welcome! Thank you for your comment!
Looks cool, ty. I'm planning to integrate my KNX modules to Home Assistant soon. One question though. I'd like to use a laptop instead of RPi. Is it possible to integrate KNX to Home Assistant Container or do I need to have Home Assistant Supervised?
dude its the most complete video than i ever see.
Thank you for your comment! We are trying hard to make detailed and easy to follow tutorials!
Hi. Do you know something about possibility to use home assistnat with knx integration and voice control from google? It could be the cheapest way to use it together.
Google Assistant is supported by Home Assistant : www.home-assistant.io/integrations/google_assistant/
I haven't tried it yet with KNX but i will try it and maybe i will make a video for it!
@@PoseidwnTech i will be grateful.
@@PoseidwnTech did you try it yet?
We haven't found time to test it yet...
I have followed your wonderful video until I reached the restart of server. I got a message”connection lost.restarting” after few seconds homeassistant war restarted but when I pressed the overview button, nothing was displayed, although I had yalm file for lights
Please send us more details at info@poseidwn.tech along with screenshots in order to be able to help you.
only last enrty of KNX in yaml is working total and showing that every devices is unavaliable
Please check my last tutorial : ua-cam.com/video/rUCrjxrQDpc/v-deo.html
Hi there, brilliant video, thanks ! Just ordered Weinzierl 773 and a new SD card to take up KNX integration.
Would Visual Code Studio have any benefits as an (config file) editor over File Manager?
Thank you for your comment! Visual Studio Code is awesome but unfortunatelly Raspberry Pi cannot run this add-on.
Thanks! But I could run it on windows pc and then samba to the config files?
@@richardjanssen4659 yes you can!
Dude, how cool is that video!
Thank you for your comment!
Would it be possible to interface your Raspberry Pi directly to the KNX network without a KNX IP Interface or Router?
Maybe you can do it by using something like that : www.weinzierl.de/index.php/en/all-knx/knx-module-en/knx-baos-module-838-en We are testing it at the moment and when we are ready we will make a video about it!
@@PoseidwnTech I got it up and running, if you have any questions feel free to contact me!
Thank you so much ，Can you publish a video of knx access to homkit?
We have 2 videos with integration between KNX and Apple Home Kit using :
1Home : ua-cam.com/video/HwQQjUIlcSo/v-deo.html
Thinka : ua-cam.com/video/GSSS4CLaMhA/v-deo.html
Later this year we will make also for Home Assistant.
Nice!
Thank you!
Thanks for the useful video
You are welcome!
Hi, thank you for the great video👍
Do you have a timelag between switching the light in HA and the light go on in real? Did you have complex scene's which you switch over HA? Here any timelags?
Greetings from Germany ☺️
Hi! Thank you for your comment! I haven't noticed any time lag. Everything works smoothly!
是否可以有中文方式
Thanks for the useful video, could you please share with us the rest API's of knx ip router if we would like to access it from our own mobile app (to integrate our mobile app with knx system), thanks in advance
Thank you for your comment! For this information please visit www.knx.org
Hi we miss you😊 can you do New vido about New knx security 2023.7.1
Thanks
Hey, very good video and very helpful, but my code gives a error: -name: "example" address: "1/1/1" state_address: "1/1/1". "Bad identation of a mapping entry in line Example, column: Example"
Can somebody help me?
Thank you for your comment! Do you want to send us the yaml file to info@poseidwn.tech to take a look?
Ti raspberry πρεπει να το βαλω μαζι με το IP Router μεσα στον πινακα; Δεν εχω μεγαλο πινακα αλλα εχω 1-2 σημεια που εχω εξοδο ΚΝΧ καλωδιο. Μηπως μπορουσα να το βαλω εκει;
Και δεν εχω καταλαβει πως συνδεεις το rasberry me to IP Router
Το Raspberry δεν χρειάζεται να είναι μέσα στον πίνακα το συνδέεις απλά στο τοπικό σου δίκτυο με ένα καλώδιο UTP. π.χ. σε ένα Switch ή απ'ευθείας στο Router σου. Οπότε το Raspberry και το KNX IP Interface/Router συνδέονται μεταξύ τους μέσω δικτύου.
Εγω εχω ηδη στο σπιτι μου το IP Router της MDT. Οποτε δεν χρειαζομαι ακομα
Ενα σωστα;
@@gbmwp πολύ σωστά! Δεν χρειάζεσαι κάτι άλλο.
Θα έχεις προβλήματα με το PI, αν θες να ασχοληθεις κάνε το Setup σε nuke.