இவ்வளவு தெளிவாக யாராலும் சொல்லி கொடுக்க முடியுமா என்பது சந்தேகமே!!. அருமை சரவணன் அண்ணா... வாழ்த்துக்கள்... சரவணன் பொன் கணேஷ் எலெக்ட்ரானிக்ஸ், கோவில்பட்டி.
This is a great project, which can achieve remote control, and can also be remotely controlled when going abroad. Thank you for sharing a very useful device
Really he is. Excellent and practical program But the problem is that when you connect for the first time, the relay works and unlocks And when you disconnect the network from the gsm And the connection again does not work and you must do a rest of the program from the Arduino, so what is the solution to this problem?
great program But there is a problem that when the network is disconnected from the GSM and then it returns, it needs to do a docked work from the Arduino in order to work because it remains at the last state it was in before disconnecting the network from it
check video @ 7:26 caller phone number is parsed out using substring function. Index plus 8th position is the starting position of caller number and we go up to 21 position to extract the caller number
இவ்வளவு தெளிவாக யாராலும் சொல்லி கொடுக்க முடியுமா என்பது சந்தேகமே!!. அருமை சரவணன் அண்ணா... வாழ்த்துக்கள்...
சரவணன்
பொன் கணேஷ் எலெக்ட்ரானிக்ஸ், கோவில்பட்டி.
Hi sir,You reduced it to around 3.4 volts for the Sim800L rx pin. Is the 5V from the Arduino a high volt for the rx pin?
This is a great project, which can achieve remote control, and can also be remotely controlled when going abroad. Thank you for sharing a very useful device
I'm not getting SMS after disconnected call..?
may i know the reason.
What if I want to update my phone number remotely?
You are awesome in teaching. Keep it up
Can we use Nano for this application?
Hi sir I have a doubt we can use attiny85 that place of aurdino uno
Hello sir ,
I'm getting " "as text message instead of text I'm send using CMGS command , is there any solution for it ?
ME TOO
Sir. Please SMS controlling video is shown for tracking and relay controlling. SIM800L
I tried to contact you many times but no reply from you
Sir jee,
Who can use maltyrely what can I do
Which type of sim card is supported to this module.......
the link for the code is not opening sir
Sim900a gsm module burned out after 1hour of working well. Which gsm module is better for industrial use?pls guide me anyone... Thanks
Sir, put a current sensor in it, which can be turned off due to overloading due to running any load on one state and we get the message reply.
Thanks for the elaborated explanation and the code !
What is the use of this project now. Will 2 G Work
that is good one indeed. carry on and post the link to download the files
Can i use 2200uf capacitor/25v?
The relay is on direct
And at call the gsm cancel but no action
Where are we get this product ?
Cost of the product ?
Your contact number ?
Pl clear my doubts unless this video is not useful for subscribers
Can we get the code on link.
Really he is. Excellent and practical program
But the problem is that when you connect for the first time, the relay works and unlocks
And when you disconnect the network from the gsm
And the connection again does not work and you must do a rest of the program from the Arduino, so what is the solution to this problem?
Please tell me solution
great program But there is a problem that when the network is disconnected from the GSM and then it returns, it needs to do a docked work from the Arduino in order to work because it remains at the last state it was in before disconnecting the network from it
what did you use to create the circuit diagram?
Bonjour
le code arduino ne s'ouvre pas que je faire pour ouvrire merci
Another subscriber here sir. I want to ask a question sir, on the void parse, where did you get the +8 and +21 sir? Thank you so much
check video @ 7:26
caller phone number is parsed out using substring function. Index plus 8th position is the starting position of caller number and we go up to 21 position to extract the caller number
The link for the code is not working
link broken please can you update it Thanks.
Hello. How to add more phone numbers
TP4056 Charger module over ah heat akuthu ena bro pannrathu
My friend, please, if you have a device code. servo motor control by sms thanks
Can u sell one .. want to buy it
Where did you get 2G Sim
Can you upload the same with 4G Sim
Sir plz code in comment 😭😭
How to register multiple mobile number
Hello, can anyone program code for me.
I will pay for code
Great work .Thank you so much
Please sir request to you please next vedio please show circuit diagram
Very Useful,thanks.
very clever, thank you!
Excellent
Interested in this project
Sir code link
Awesome ♥
Very good job thank you Sir.
Excellent , thank you
Good
Code pls
Resistor value
SUPER SIR
Very nice sir
Good information
great work
Thank you so much sir
Thanks
Tanks sir and I produ to you your a india and Bangalore
sir how i can download the code?
Can i use 2200uf capacitor/25v?