Pretty strong sounding motor there. If the tach is accurate, it runs to over 8K rpm before it begins to float the valves a bit. A lot of time between 7 and 8.... A motor like that could be used in all sorts of racing venues. Whoever built it knew what he was doing.
Holy shit look at all these Facebook engine specialist that act like they know a thing or two because they watch roadkill and work at a quick lube. Haha
There are guys in Australia putting 1500+ HP motors in a burnout car, i don't see the difference. if he wants to spend the money it's his decision. Personally i love the fact that i can enjoy the beautiful sound of raw horsepower while watching a demo derby!
Monera96 I agree with your comment, however I dont see 700 ponies there,it takes big $ to get that out of a small block. A 700hp goal is more achievable for less in a 454, 396 , etc for a few thousand. No, I dont believe 700 horse, it wouldnt even make sense. I am somewhat impressed at the almost constant 7000 to even 8000 rpms this engine endured. No, horsies dont matter in mud, unless your mud draggin but thats a whole other story.
Ko-wing wong I realize that, its not a big secret...But what point would it make to put a 1400 horse motor that costs you around twelve grand or more to build, shove it in a herbie derbie car to try to win $1500.00 and destroy it in the process? Respectfully, you're missing my point.....
+6redline3 It don't even sound like a 700hp small block (or anywhere near it). I don't doubt he has a forged bottom end though, as you said 7000-8000 rpm's all that time LOL
@@dylanstassen1058 He clearly IS bagging, not only does he only hit with the front, but he quite clearly slams on the brakes before all of his hits. He cant drive for shit.
No matter what you do absolutely do not keep the car running if it’s throwing smoke or has any damage what so ever, up here in Vermont what’s hot is el dorados, people go all over the country looking for them to put in our demo, but, they often times just keep revving their motors sitting there stuck not getting anywhere damaging it, nothing breaks my heart more then that, one of the guys last year blew up on him because of this, endlessly revving his engine trying to get out when he obviously could not, no point in it all it gets you is a even more broken car, and with this nice of a engine I’m sure you wouldn’t want that to happen, great job anyway, and good luck 👍🏻
with that motor, and carb set up with those headers, you would be lucky if it gave 300hp, even if it had some quality head work.I call B.S. big time B.S
Some Chevy 350 small blocks had as little as 148hp in the smog era. The engine in the video sounds and revs like a 325-350hp engine. 500hp on mud in a rear wheel drive car would be useless.
That could be a 400 bored to 434 you don’t know and that carb could be a 850 cfm plus who knows dude you obviously don’t know shit you can just tell that it sounds healthy asf I mean listen to the lope moron. For all you know he could have 14:1 compression pistions in it and running race gas,e85 or alcohol. Like dude your a moron 1969 z28 camaros with 302s made more than 3 hundred horse.all you have to do is look at the tach in the left bottom and watch the rpms he took it well over 8 thousand a few times and that just tells this is a well build motor with a steel crank rods and pistions, cast shit would have let lose at that rpm. And to note the valve train there was no valve float up in those rpms so that tells you that there’s a good cam and lifter set, roller rockers ,springs and so on. Anyways don’t talk about shit u don’t know punk
Kyle Doll I agree 100% No doubt it's built. Easy 700hp. Listen to rpms and it didn't miss once. I know the sound of a small block and that was 10rpm at one point. The valve covers are tall and narrow so that gives a clue into the valvetrain, connecting it to a gear drive, wise investment.
I agree if you notice the on the Tac it was already redlining at 7,000-8,000 Rpm, and by the sounds of the engine it was not going any higher than that.
Sweet video! I like your 10k rpm sarcasm for the next engine but that would be cool to see if someone had endless funds. Nothing like seeing a vacuum pump, low tension rings, gas ported pistons, and lots of titanium valvetrain in a derby motor!!
700 horsepower my a**!! Sure it revs, but I highly doubt that motor made that much horsepower. I had a 13:1 gear-driven 468" roller motor that was built by a well known NW engine builder whose race motors were legendary, and it was one of his favorite pieces (he even offered to buy it from me when he was done for $10K), and it made 639 horsepower on a dyno stand @ 5800 rpm. I threw a 400 horse Nitrous "Big Shot" plate system on it just for a little extra kick. Manley stainless steel severe duty 2.250" and 1.900" valves, Crower custom ground nitrous roller camshaft, billet stud girdles, micro polished and balanced steel crankshaft, heads had 38 hours of port polishing, bench flowed, cc'd, reworked 1050 Dominator, ect. If his motor was making that kind of power, it must have happened late at night in his dreams.....lol
If you read the description it will tell you that the front axle broke and the wheels kept working against each other so it probably limited what he could really could do with hp
To those of you commenting that it dont "sound" like 700 hp, sound has nothing to do with the amount of power an engine has.........and to those hating I'd love to see your car.......oh wait hard to build a car while spanking it in your moms basement
Man you guys are dumb 😂😂 this car has two possibilities 1 destroked 400 sbc to 377 (high rev motor) and 2 ITS A HIGH HORSE POWER MOTOR, no 305 or 350 is going to turn 8 grand (tapping 9) And be damn fine. He will run that motor again no doubt.
Every demo derby needs to go back to the old rules and keep them all completely stock big motors are for people that just want to win and thats it were is the fun in this sport bc there is none anymore
Brady Sprague I guess you've never been to a demo derby before.there's only the driver in the car and most generally it would be illegal to hit on the drivers side. Also this car isn't even close to putting out 700 hp.the title was a lie.these cars are lucky to go 10 to May be 15 mph, depending on how wet the track I do take it you're not much for car racing either.no disrespect intended either
what ever HP it really has it was built right....that is major RPM for extended time with nothing out the headers.....bad ass engine......don't know how it handles this abuse but it did...
OK People there is 2 things to learn here number 1. if you have a 700hp derby car u have to much money and to much time lol.... Number 2. If you make a derby car out of a wagon (the yellow 1) after u get hit 4 or 5 time it make for a real great road grader... on the plus side the track is nice and flat now good job.....
Build your front end right and you won't have to worry about that, I hardly ever hit cars in reverse and rarley trashed a radiator because of how hard I built my front ends
1) Producing that kind of noise when you hit someone is rather intimidating 2) If you get good traction and don't have the power to move the wheels you're more prone to get stuck in a bad situation when it comes to a shoving match 3) In a more prestigious show when everyone has good drivetrains and well built cars chances are at some point in the derby you'll lose a radiator when it comes down to it. Whoever has the better built motor, takes home the purse which is typically 5-10 grand.
Even if he ain't 700 HP, no stock engine "With Zoomies" is gonna hold up hitting very close to 8,000 RPM Abuse like this one. Engined definitely had mods to it. If you think this is stock, you should not be allowed to have Wrenches. Whoever built this engine, Not Bad! :)
Definitely sounds quite healthy ! However, I'm confused by the rationale of putting that much power in something that intentionally traction limited. What am I missing ?
Pretty strong sounding motor there. If the tach is accurate, it runs to over 8K rpm before it begins to float the valves a bit. A lot of time between 7 and 8.... A motor like that could be used in all sorts of racing venues. Whoever built it knew what he was doing.
3:21 seconds of my life at the start of this that I'll never get back. Thanks.
Holy shit look at all these Facebook engine specialist that act like they know a thing or two because they watch roadkill and work at a quick lube. Haha
But roadkill, is so awesome.
TurkeySandeech I mean do you really think this is 700hp?
@@ramsay4804 If he does then he's a pompous moron.
There are guys in Australia putting 1500+ HP motors in a burnout car, i don't see the difference. if he wants to spend the money it's his decision. Personally i love the fact that i can enjoy the beautiful sound of raw horsepower while watching a demo derby!
the guy at 0:40 needs to watch the paint
hahaa
Michael hahaaahaaaahaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaAaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
She’s a classic
David freiburger
Hahahahahhahahah
700 hp an moves 10 mph tops..... I am bored to tears
Is he draging the bitch u honestly cant tell how much hp he has whenn he only drives in second gear its 500hp 700 tops
Exactly
700 is pretty useless on mud... 200 would be more then enough
Monera96 I agree with your comment, however I dont see 700 ponies there,it takes big $ to get that out of a small block. A 700hp goal is more achievable for less in a 454, 396 , etc for a few thousand. No, I dont believe 700 horse, it wouldnt even make sense. I am somewhat impressed at the almost constant 7000 to even 8000 rpms this engine endured. No, horsies dont matter in mud, unless your mud draggin but thats a whole other story.
6redline3 we have technology to get 1400hp out of 4 bangers now. Comment obsolete.
Ko-wing wong I realize that, its not a big secret...But what point would it make to put a 1400 horse motor that costs you around twelve grand or more to build, shove it in a herbie derbie car to try to win $1500.00 and destroy it in the process? Respectfully, you're missing my point.....
+6redline3 It don't even sound like a 700hp small block (or anywhere near it). I don't doubt he has a forged bottom end though, as you said 7000-8000 rpm's all that time LOL
+Monera96 No!
Got me uh 700hp engine so I can win that big $200 bucks! Lmao
I guess you don't know much about derby. I've been to two 10,000 to win derby this year. The car he is in will probably run 2 to three times.
What good is 700 hp if you are gonna bag the whole time? I understand the mud but that shit is super boring. Ive seen bumper cars at lagoon hit harder
If you read the description you would've known that his steering was broken the whole time. So no, he wasn't bagging
Bailee Hodson they either need a bigger track or less cars
I mean it’s not even just his car the whole derby looked about boring af😂 I would have been pissed if I spent good money to watch this crap
Facts
@@dylanstassen1058 He clearly IS bagging, not only does he only hit with the front, but he quite clearly slams on the brakes before all of his hits. He cant drive for shit.
700 hp but your doing nothing but sand bagging
Richard Gravit read description
I somehow think the word description got a lil twisted with the word excuse.
No matter what you do absolutely do not keep the car running if it’s throwing smoke or has any damage what so ever, up here in Vermont what’s hot is el dorados, people go all over the country looking for them to put in our demo, but, they often times just keep revving their motors sitting there stuck not getting anywhere damaging it, nothing breaks my heart more then that, one of the guys last year blew up on him because of this, endlessly revving his engine trying to get out when he obviously could not, no point in it all it gets you is a even more broken car, and with this nice of a engine I’m sure you wouldn’t want that to happen, great job anyway, and good luck 👍🏻
what is the point of 700hp and 9000rpms in the dirt besides it sounding good
merica
because derby u clicked it
Not much grip on the dirt
It's not because it's dirt it's because they have bold tires
HP has nothing to do with sound.
Actual video of me trying to get out of Walmart parking lot in rush hour
Sandbagger there is so much sand here you got your own beach
I am quite intrigued by the pcv system. Pretty dang clever
3 minutes of suspense up front was OTT, the rest was similar to watching grass grow.
Sweet motor though.
Was a sweet motor until he put it in a derby car and fucked it😂😂😁😁😀😯😯😥😥😦😦😐😐😑😑😑😕😕😧😧😨😱😱😂
with that motor, and carb set up with those headers, you would be lucky if it gave 300hp, even if it had some quality head work.I call B.S. big time B.S
Some Chevy 350 small blocks had as little as 148hp in the smog era. The engine in the video sounds and revs like a 325-350hp engine. 500hp on mud in a rear wheel drive car would be useless.
That could be a 400 bored to 434 you don’t know and that carb could be a 850 cfm plus who knows dude you obviously don’t know shit you can just tell that it sounds healthy asf I mean listen to the lope moron. For all you know he could have 14:1 compression pistions in it and running race gas,e85 or alcohol. Like dude your a moron 1969 z28 camaros with 302s made more than 3 hundred horse.all you have to do is look at the tach in the left bottom and watch the rpms he took it well over 8 thousand a few times and that just tells this is a well build motor with a steel crank rods and pistions, cast shit would have let lose at that rpm. And to note the valve train there was no valve float up in those rpms so that tells you that there’s a good cam and lifter set, roller rockers ,springs and so on. Anyways don’t talk about shit u don’t know punk
It is just a bored out small block which is screaming and that is what makes it sound like it is 700 horse power but it probibaly has about 500 hp
it sounds good but not 700hp good not even 500hp good my best guess would be low 4s and that's only because it's turning some rpms
Kyle Doll I agree 100% No doubt it's built. Easy 700hp. Listen to rpms and it didn't miss once. I know the sound of a small block and that was 10rpm at one point. The valve covers are tall and narrow so that gives a clue into the valvetrain, connecting it to a gear drive, wise investment.
Turning 7000 rpm running 5 mph😂😂😂
Carson Freeman I think I seen 8500
8000+ actually
Exactly
Nice run you had there till the steering broke. I swear I could just sit and listen to this engine idle all day long. Man your engine sounds awesome.
I agree if you notice the on the Tac it was already redlining at 7,000-8,000 Rpm, and by the sounds of the engine it was not going any higher than that.
Sweet video! I like your 10k rpm sarcasm for the next engine but that would be cool to see if someone had endless funds. Nothing like seeing a vacuum pump, low tension rings, gas ported pistons, and lots of titanium valvetrain in a derby motor!!
WTF is up with you all hitting driver side door ??? THATS A HUGE NO NO IN DEMO man geeesh
Ill do that when im in demolition derby...
More than once
He's an idiot rookie.
half the time non intentional
he should've been DQ'd
700 horsepower my a**!! Sure it revs, but I highly doubt that motor made that much horsepower. I had a 13:1 gear-driven 468" roller motor that was built by a well known NW engine builder whose race motors were legendary, and it was one of his favorite pieces (he even offered to buy it from me when he was done for $10K), and it made 639 horsepower on a dyno stand @ 5800 rpm. I threw a 400 horse Nitrous "Big Shot" plate system on it just for a little extra kick. Manley stainless steel severe duty 2.250" and 1.900" valves, Crower custom ground nitrous roller camshaft, billet stud girdles, micro polished and balanced steel crankshaft, heads had 38 hours of port polishing, bench flowed, cc'd, reworked 1050 Dominator, ect. If his motor was making that kind of power, it must have happened late at night in his dreams.....lol
If you read the description it will tell you that the front axle broke and the wheels kept working against each other so it probably limited what he could really could do with hp
700hp is over kill for a wet track like that! Killing a epic motor!
To those of you commenting that it dont "sound" like 700 hp, sound has nothing to do with the amount of power an engine has.........and to those hating I'd love to see your car.......oh wait hard to build a car while spanking it in your moms basement
That looks like so much fun..
PLUS..
To bring your friend for a ride of death is the best!!
Total overkill, sounds like he's running a3 speed manual, with that much horsepower he could launch in 3rd gear instead of pegging the engine out
Hey boys it a 327 dirt car engine on alcohol
Man with the 700hp and in a demo car, I wanted the motor mounts to break and see that motor dance haha
Impressed! What a great engine!
Awesome video
Man you guys are dumb 😂😂 this car has two possibilities 1 destroked 400 sbc to 377 (high rev motor) and 2 ITS A HIGH HORSE POWER MOTOR, no 305 or 350 is going to turn 8 grand (tapping 9) And be damn fine. He will run that motor again no doubt.
2 Crucial 4 You you are dumb to its not a motor it's an engine DUH!!!
@@deerepower337 a engine is a motor
that is SOOOOOO cool.....twistin 8 thousand rpms and not going ANYWHERE ...awesome
yeah. I know. it would of been better if it was on solid street instead.
First demo I seen that allows passengers
That looks pathetic, might aswell have 5HP!! the speed they're going..... "Sigh"...
Hello 8 grand my ole friend...I come to visit you once again...
love this wish i could have saw it in person. BTW your car sounds amazing
This guy drives like he's got 45 HP !!!
He can’t get traction 😂
1: That motor isn’t making 700 horses.
2: 700 hp and you’d be sitting in one spot in the mud spinning at the slightest pedal touch.
Thats exactly what he was doin....he was sand bagging and sitting damn near in one spot when he touched the pedal....wow
I gotta hand it to that #35 white Crown Victoria. It got turned into a hatchback and still goes and goes!
The circular filter in the center is the air intake. The pipes are the exhaust.
dang man thought it was the other way around thanks
In derby,it's not about HP or RPM.Its keeping stuff cool and together that wins."Racing"engines are only ear candy to scare rookies.
Every demo derby needs to go back to the old rules and keep them all completely stock big motors are for people that just want to win and thats it were is the fun in this sport bc there is none anymore
Anyone else think it's stupid to have a passenger and driver side hits good way to hurt someone
Brady Sprague I guess you've never been to a demo derby before.there's only the driver in the car and most generally it would be illegal to hit on the drivers side. Also this car isn't even close to putting out 700 hp.the title was a lie.these cars are lucky to go 10 to May be 15 mph, depending on how wet the track I do take it you're not much for car racing either.no disrespect intended either
@@deannederhoff Did you watch the video? There was clearly a passenger in at least one of the cars.
Awesome!
Damn that thing screams
this is awesome nice sound!
700hp screw a demolition Derbyshire I'd drag race it make some god cash and you won't screw your car or engine by smashing it purposely
Hank Hill by
Hank Hill its not even close to thAt its a pos
Not all of us get hard ons by driving in straight lines for 5 seconds like you probably do,
I want to obtain god cash
Hank Hill you obviously aren’t into derby so get off this video lol
Awesome man
700hp in the mud seems useful
700 horse power is impressive if your not running a 383 stroker that stroker is BA like you aint never believed
700 hp combined between all cars
Give me 500hp and watch me put the fender up over his carb so we don’t have to watch the 3mph hits while all he does is spin!
Sounds awesome
lol...700hp? not with that sweet HEI distributor...
RvolvoR clearly u know nothing about hei distributors. If they are working correctly there isn't much better for the job.
Cool video
what ever HP it really has it was built right....that is major RPM for extended time with nothing out the headers.....bad ass engine......don't know how it handles this abuse but it did...
we took one of the bad 358 Big Block motors we had from one of our dirt modifieds and put it in a nova for a derby a while ago XD
Sandbagging at it's best!
Why does this 300HP car keep showing up every time I enter youtube wanting me to watch it over and over again?
That's wild man!!
Amazing sound ;-)
niceeee car i love it, the engine is sooo awesomme
Maybe use the engine for the truck pulling.
now thats one well build engine!
Sounds good
It sounds killer !!!
A 700hp derby car is cool i guess. Now lets see a pinto demolition derby car!
lol that's evil
Always get clostrophobic watching these demo derbies, no space, no fun.
Noah Stuart. you're completely right
OK People there is 2 things to learn here number 1. if you have a 700hp derby car u have to much money and to much time lol.... Number 2. If you make a derby car out of a wagon (the yellow 1) after u get hit 4 or 5 time it make for a real great road grader... on the plus side the track is nice and flat now good job.....
Aren't you supposed to try and back into other cars and protect your radiator?
You are right...This guy doesn't have a clue
Anthony kretowicz it all depends on how good the radiator is protected cuz at my town u are aloud to encase your radiator
You can also have a mid or rear mount radiator
Too much beam ng drive...
Build your front end right and you won't have to worry about that, I hardly ever hit cars in reverse and rarley trashed a radiator because of how hard I built my front ends
Shoulda put some super swampers or boggers under the back end to go with all that power
Henry County,Illinois?
All that power is useless 350ci stock is more than enough. All you proceed is doing was spinning tires and burning fuel.
looked like he was slamming people so looks like he made a good call with 700
Awesome
You can make anything sound like 700hp with stacks. My smog 360 for example
You got to have the power for the traction
Suck that you lost, but it was some awesome first person footage!!!
Love that sound
8k like it ain’t shit, I think I might have seen him bump 9 a couple times 😂😂😂 sbc #TTFMF!
The tach is probably one of those that you can set to 4 or 6 cyl lol
@@jonwilliams6975 😂😂
1) Producing that kind of noise when you hit someone is rather intimidating 2) If you get good traction and don't have the power to move the wheels you're more prone to get stuck in a bad situation when it comes to a shoving match 3) In a more prestigious show when everyone has good drivetrains and well built cars chances are at some point in the derby you'll lose a radiator when it comes down to it. Whoever has the better built motor, takes home the purse which is typically 5-10 grand.
Even if he ain't 700 HP, no stock engine "With Zoomies" is gonna hold up hitting very close to 8,000 RPM Abuse like this one. Engined definitely had mods to it. If you think this is stock, you should not be allowed to have Wrenches. Whoever built this engine, Not Bad! :)
truth
What in God's name, do you have in that fuckin' thing?!?! 😍 sounds like a 283 or 302 in full scream mode! 😁
I was the one who got a ride in the abulence from 35. They told me I couldn't run but I turned around and got 2nd in east moline.
skip to 03:21 for the action.
I'd like to see some of the cars these comment warriors have
I typically demo in a Bugatti. It's fairly useless on mud but looks nice.
awesome video man do you have any with a second cam in it facing the back to?
boring vid but awesome sound....kinda works as a background music when repeating emails and stuff :D
All that power and couldn’t use it
I cried a little😢
For having 700hp this guy didn't do shit. He needs to learn how to use that power.
I think you did quite good actually i just had to turn down the volume cause it started to give me a headache it was so loud XD
Definitely sounds quite healthy ! However, I'm confused by the rationale of putting that much power in something that intentionally traction limited. What am I missing ?
nothing. just for the sake of freedom and bald eagles
Sandbagger! Wrong rear end gear! Wth
idk about 700hp but damn that thing can rev
Olalaaaaaa oui 👍👍👍👍
This definitely got the GoPro effect
Holy rip 8 gs!!
I do however notice the cutout firewall to make room for the distributor. Wonder if he set the engine back.