How to Replace Rear Strut Assembly 07-11 Honda CRV
Вставка
- Опубліковано 23 сер 2024
- Buy Now!
New Strut & Spring Assembly from 1AAuto.com 1aau.to/ia/1ASS...
In this video, 1A Auto shows you how to replace the rear strut assembly. This video is applicable to the 09, 07, 08, 09, 10, 11 Honda CRV
🔧 List of tools used:
• Pry Bar 1aau.to/ocz/1AX...
• 14mm Socket 1aau.to/oxc/1AX...
• 17mm Socket 1aau.to/oxc/1AX...
• 19mm Socket 1aau.to/ogB/1AX...
• Ratchet 1aau.to/oCS/1AX...
• Socket Extensions 1aau.to/oxc/1AX...
• Rust Penetrant
For More Info visit us at 1aau.to/h/7y/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Thanks for very nice clear video. Is it common that the bottom of the struts rusted like that?
What is the model name and number of the telescopic jack stand used in the video?
You make it look so easy with a clean garage, lift, pole jack, snap on tools and non seized bolts. Mine didn't go as smoothly but your walkthrough helped ;)
true! the seized bolts are a big pain that adds hours to the job
It's painful watching you use hand tools to remove the fasteners but I appreciate that you do it to better show the repair. Thanks!
I would’ve never thought of dropping the front bushing of the rear lower control arm! The amount of time it saves! I’ve been replacing the struts without dropping it. What a hassle!
I love the woman mechanic in the 1A Auto videos for the Honda CRV. She makes it look so easy, All i need now is to trade in my driveway for a garage with a lift.
Very important that you remove the assembly tab on the top of the Honda original struts, this tab locks the strut in place during the assembly process. It is not possible to remove the strut without removing the tab. Other than the wrong bolt sizes great video, help a lot
I have seen so many how to video's on my Honda crv, this video is superb. Thank you for this quality guide.
+Gísli Þór Gunnarsson Thanks for checking us out! 1AAuto.com
Gotta love Sue, she knows her stuff
Alright. I’ve watched this video 3 x. I just ordered the parts via you guys on 9/27. Hope this works for my daughters 08 CRV. I’ll provide update in the next couple of weeks.
Hopefully you don’t have any shipping delays…I look forward to the update. I plan to do this using floor jacks sometime in the near future, and your input will be appreciated. Good luck!
Thank you. That is the cleanest shop,ever.
Sue, you are a great teacher. I always enjoy your videos and apply the knowledge I learn. :)
+a woods Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
You made it look easy !
This woman is very good…wish she could work on my Honda CR-V..I need all 4 struts to be replaced and I need to hire a mechanic that knows what their doing..
Is it possible to use a spring compressor to replace the strut without removing the control arm bolts and not lowering the control arm? after Honda did the rear subframe repair the bracket for the repair goes over the front bolt of the control arm requiring removing the entire recall repair bracket in order to lower the control arm.
Thanks for the video. One correction as it is a safety issue. @ 16.43 in the video it mentions the incorrect torque for those trailing arm bushing bolts. It should be 84.6 lb-ft per the manual or just round it up to 85 lb-ft...............again thank you for the awesome step by step video.
@ 16.43?
All data says 54ftlb don’t want to overtorque by that much
Great video with detailed instructions.Thanks.
+Krystian KRYSTIAN Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
great job !!!!! did all that with no power tools IMPRESSIVE}}}}}
+joe sno Thank you for your feedback!
Not really. Try doing a rusty one on your drive. Then you should get praise.
I just did this over the weekend, and this method ended up being the easiest, especially when it comes to putting the bottom bolt back in the lower shock mount. This is not designed very well and could have been easier with a better design. Fortunately, my rear shocks lasted about 160,000 miles. If you power wash before you get in there you would be surprised how clean it can be R.A.
Yeah, my '09 just rolled over 160k too! I think I should have changed the shocks a few thousand miles ago though because it feels like I'm driving on a trampoline. Left side done- need to do the right side tonight!
Great video . I was trying to find a video with the 4WD model. Thank you
+Daniel Guzman Thank you for your positive feedback! We are happy we could help.
They're the same I believe.
Just did this on a 4wd model, this passed weekend. Can confirm, this procedure worked the same.
Yet another helpful tutorial.
when removing old honda shocks, there are tabs that make it very difficult to remove shocks. You can remove 6 nuts from each side and bend that tab upwards to make removing the shocks easier. Check out the TRQ video of this on more detail
Six nuts from where? Where is the tab?
Not all heroes wear capes. Just fought with this for 20 minutes before seeing this comment.
Damm the way she picked up that wheel. !!
❤
The torque spec for the upper rear shock mount aren’t 16 ft lbs I have the service manual for this car and it is 54ft lbs just a heads up
Thanks ! I triple checked this and you are correct!
How hard or easy it this to do on the floor with jack stands?
Brilliant job - thank you
FYI - Honda had a recall for the control arm connection to the frame due to rust - it is a terrible band aid they came up with! You might have to update this portion of your video, Honda now added a few more terrible steps....
Awesome video. Step by step very well explained, Thanks
Awesome video covered everything perfectly nice work !!
Excellent video, I've got this job to do on my CR-V, unfortunately the previous owners garage fitted the wrong strut to my car. In the UK 🇬🇧 we have the option for Xenon lights. As part of the automatic headlight leveling system there is a sensor the bolts to a bracket that is welded to the rear strut. The rear strut on mine doesn't have the bracket and they just left the sensor arm hanging free. For reference the Honda part number for my 2007 Mk3 strut is 52611SWAE02. Happy spannering 🔧
That looks like a real PITA!
impressive!
I was hoping Sue was doing this video! My 07 looks way better under there than this 09 that has to deal with those brutal winters.
+David Monthie Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Excellent video- thank you!
Putting the bottom of the strut intp position is very tough.
Would this job require an alignment after?
Exelente explicación
Awesome video EXCEPT why not Fast Forward through tightening the bolts we get the idea!
+john jones Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
Excellent video
+Oman Toodle Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
These videos are super helpful, thank you
+Will Sheehan Thanks for checking us out! 1AAuto.com
+Will Sheehan Thanks for checking us out! 1AAuto.com
Good video but instead of taking the control arm bolts all the way out like you did I'm just gonna back them out almost to the end so i can zip them back on and not fight with them to get them back in
+Daily Driver Thanks for the tip! We'll pass this info along to our production team.
Man i hope that works for my seconds side; I just replaced my rear passenger side and cant for the life of my get the control arm bolts back on. I have tried multiple different jacks, angles, etc and i can't seem to get things to line up right, managed to cross thread both bolts and i am worried i need to tap the holes now. Not sure how to even get my car out of my garage if it turns out this is above my skill set! 💩😤🥺
@@skygoing82 any update on your effort?
@@1946jeeplover aligning the control arm is his New Year’s resolution lol
Super thanks 🙏
Thank you...very clear and helpful video!!
+flhtcui2 Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
Thanks!
Thanks for the video. A side question: if a rear strut needs to be replaced, would tire wear appear on the inside or the outside of the tire? Thanks in advance.
How long is that ratchet extension that you used towards the end of the video?
At minute six, why did you release tension on the control arm before finishing to remove the lower strut mounting bolt? You put a lot more tension on the bolt to remove it
I don’t get it either
These were aftermarket struts that she pulled out, the original ones will have a tab on the strut mount that you’ll have to bend up to remove it
That was awesome DIYS video! Keep up the good work. Can’t believe that lady installed the rear strut assembly. Wow!
+Paul C Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
I have a 2011 honda CRV. My car shakes when I accelerate. I’ve noticed looking from the rear the driver side rear looks like it’s sagging really bad and wondering if it’s prob the strut is locked up or frozen up it doesn’t give any bounce when going over speed bumps or or RR crossings
Why take the front lower control arm down and not the upper control arm? I’ve always just taken the top arm off.
Great video
+Danny's do it yourself car video Honda civic lx 05 Thanks for checking us out! 1AAuto.com
Good video, thank you.
+Ed Murray Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
6:21 what would you call that bolt she's taking out there? I need to find a replacement asap and need to know what to call it
Sue you da bomb. Thank you nice video. 😇
+Martin Koche Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Is this an AWD CRV? is it the same for a FWD CRV?
👍 Great video 😊
Thanks for checking us out. 1aauto.com +Frank Brox Nyheim
Very useful, thanks! Do you ship to Canada or can recommend a decent supplier here (west coast) Cheers
Thanks for checking us out! Yes, we do offer shipping to Canada. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c +Island Aerial
its cost too much 122$ for shipping to Canada i prefer buy it from local part stores
@@1AAuto Wayyyyyy too much for shipping to Canada. Get rid of those BROKER FEES please...and I am NOT referring to duty or tax!
wow thanks -- so only two things I would correct ... 1. AN IMPACT WRENCH is your best friend, cut the time down by 1/2 .... 2. When they say the shocks come with 14mm nuts what they mean is 15mm ... no worries though ....A racing FLOOR jack is your best friend - unless there is someone to help push things out of your way to remove and put back new springs - you need 3 hands ...
2008 CRV: The bottom of my strut has a linkage that I didn't see in this video. The linkage is just under the coil spring itself and goes to a thin plate. On that plate there is a type of sensor with some wires running to it. Does anyone know what this is because mine appears to have a bad stress crack in it; maybe due to the bad strut.
Any link to see the same thing on 97'-01' crv's? Please
Did you say if we need to do the alignment on the back after we do this installation
+1sttobylopez We would suggest you check to make sure that the toe and camber are not off.
Bro I wish I would’ve watched this video before I replaces them I struggled soo muchh I regret not watching it
+YL MSR Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Are the replacement part long life? because I just bought some struts from eBay and last only 4 months now I have to replace it again 😥
+Gody Gody Our shocks do carry a lifetime warranty on them. If you need any help with ordering please give us a call!
I love you
I actually got a crv in my garage right now and it's got the squeekys like I always say what kind of insurance you have on it. Oh no
Good video, however you guys should really do these videos how most of us would repair a vehicle. Using a regular jack to lift the vehicle. Furthermore, you should do it with vehicles that ARENT BRAND NEW or HAVENT BEEN DETAILED prior to the work you are showing.
+Corey Long Thank you for your suggestions. 1aauto.com
How is it detailed its dirty and rusty under neath 🤷♂️
This car is nine years old to boot.
Do you need an alignment after replacing the rear shocks?
+Ronald VanRoekel It is not necessary to have an alignment performed after replacing only the rear shocks.
Only when you change the springs or bottom arms etc. Alignment only changes as your suspension components wear out.
Is this the same way to do it on a 2015 crv?
+Raider Alex We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Thanks for checking us out! 1AAuto.com
the service manual says the top bolts on the strut should be 54lb ft not 16..
Can you actually install them incorrectly? Other than torquing them without a load on them? I installed mine on My Honda Element and the bushings already look like they are trying to tear.
U gonna need new bushing
You've tightened them before the weight was on the wheels it sounds like.
11:40 you need to load the suspension. Without it you will rip the bushing.
I agree. Bushings should be tightened in the static position, meaning, as though the car was on the ground with the weight of the car on them. I just did this job and put a block under the suspension and lowered the car until the weight was on it and then tightened the lower shock bolt.
Send that tool to me I fix it for you or give you some advice. Contact your local machine shop sometime its cheaper than a new tool. I know what you mean about "special" got my grandpa's tools and no one touches them no one but me and my uncle Bob
Strut has been installed wrong way round. The tab on the top mount should face outwards and the end of the coil at the bottom of shock should face inwards.
if you would use power tools it would save us all time...
Why you guys always using hand tools?? Come on now. We all use impacts!
Not all people use impacts, that's why. No problem in using ratchets
There is a problem in using impacts though. Even if I wasn't a professional mechanic, I wouldn't let most mechanics touch my car because of that. Impacts should rarely ever be used, especially in regular service. Unless you are working on older vehicles frame, steering box, large trucks, etc...and still really only for bolts with 1/2" shaft or larger.
My son and I did this all by hand on the weekend in our garage. I've seen too many cowboys with impacts booger up simple jobs and cross-thread important stuff and scratch up rims etc. Drills have their place- but sometimes finesse is required.
Your pushing up the strut not “pulling up.”
You didn't even clean and lubricate the rusty screws?
Excellent video
+Michael Millete Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c