As a tester of the Clutch delay release, It made clutch feel so much better and my clutch slave valve actually was broken inside so huge improvement with such easy install. 100/10 recommend
Well if you haven’t heard, all PERRIN products are 25% off right now on our website perrin.com/shop/shifters/shifter-detent-kit?adpprov=1&campaign_id=19934836472&keyword=&gad_source=1&gclid=Cj0KCQiA6Ou5BhCrARIsAPoTxrCIBK3EYIzgvNNodYjeSYDBLuYUnlxOtdUZETTsP91qYA2uRSNWz74aAkcTEALw_wcB
Its not necessary for the install, only a little fluid comes out. Of course if you got 50K miles on the car and are down there already...might as well.
for the shifter detent kit--what impact is there if I decide to only install the 4 smaller bolts and not the larger one at the top rear that requires the allen key? what exactly does the rear bolt contribute to the equation? thanks!
I ordered this for my sti and didn't realized that you have to remove you downpipe to access the 3 side detent bolts. it doesn't mention that on the instructions. at least with the stock downpipe you do.
Our apologies. We might have had our downpipe installed when we made the instructions... Thanks for bringing this to our attention though, we're gonna update them to include this info.
As a tester of the Clutch delay release, It made clutch feel so much better and my clutch slave valve actually was broken inside so huge improvement with such easy install. 100/10 recommend
How was bleeding the clutch
@@pauletecelebradocusi3555 Honestly super easy as long as you have a bleeder kit $8-10 at walmart or any auto parts store
@@pauletecelebradocusi3555bleeding the clutch is really simple, especially if you have a buddy. You can get it done in 3-5 minutes
Thanks for thoses great products... will be making myself a gift for christmas whit thoses 2.❤
Well if you haven’t heard, all PERRIN products are 25% off right now on our website perrin.com/shop/shifters/shifter-detent-kit?adpprov=1&campaign_id=19934836472&keyword=&gad_source=1&gclid=Cj0KCQiA6Ou5BhCrARIsAPoTxrCIBK3EYIzgvNNodYjeSYDBLuYUnlxOtdUZETTsP91qYA2uRSNWz74aAkcTEALw_wcB
Thanks just ordered mine!
sweeeet! Cant wait for you to experience them yourself.
Poor Jeff. Not an extrovert. I can relate.
🤣 what!? I've never noticed.
Is it recommended doing a transmission fluid swap after this install?
Its not necessary for the install, only a little fluid comes out. Of course if you got 50K miles on the car and are down there already...might as well.
Any increase in wear ?
It won’t increase wear in any way from what you might see normally.
Is this eventually coming to the VB WRX?
Youre in luck as they all ready fit the VB! Check out the firment chart on the website perrin.com/shop/shifters/shifter-detent-kit
The VB has, basically, the same transmission as the VA, TY75. On their website, they have a listing for the 15-24 WRXs.
for the shifter detent kit--what impact is there if I decide to only install the 4 smaller bolts and not the larger one at the top rear that requires the allen key? what exactly does the rear bolt contribute to the equation? thanks!
that controls the centering while its in neutral. so it's best to install all of them to get the full affect.
@PERRINPerformance thank you for confirming, appreciate it!
Anytime! if you have more questions feel free to ask. You can also email us at tech@perrin.com or chat with us on IG or our website.
What happens if you change the 3 easy one to get to and not the Allen key one that requires to remove the transmission cross member
that controls the centering while its in neutral. so it's best to install all of them to get the full affect.
I ordered this for my sti and didn't realized that you have to remove you downpipe to access the 3 side detent bolts. it doesn't mention that on the instructions. at least with the stock downpipe you do.
Our apologies. We might have had our downpipe installed when we made the instructions... Thanks for bringing this to our attention though, we're gonna update them to include this info.
I have a short shifter, shift stop, bushing and shift plate. Do you think this will make a difference
Most definetly! The detent kit is like the final peice to the puzzle. perrin.com/shop/shifters/shifter-detent-kit
YES !!!!
Cool 😎
like a cucumber😁
@@PERRINPerformance so is watermelons
oh dang.....You right!!!
@@PERRINPerformance it'd so cool you guys develop a mid range Oem plus turbo kit rated close to 700whp..😉
hey ya never know🤷♂️
changing the name to "PERRON" would increase sales by 500% (in the latino market)
Maybe we could do some sort of regional naming😁
Perron is also a french last name 😅
Awe it’s not gonna work on a 5 speed that some old horse doodoo, make me one k thanks
Don’t worry, we are in the works of making some for the 5 speeds!