Yes, 4-stroke. You are correct about oil level and this is described in the manual. The oil level is adjusted according to what work is performed. Thanks for your observation! Regards Nils
Cześć. Mam pytanie odnośnie tego modelu, na biegu jalowym chcąc ustawić średni gaz to po chwili wkreca się na wysokie obroty czy wiesz lub ktoś może wie jaka może być tego przyczyną? Z góry dziękuje za odpowiedź, pozdrawiam.
Nils Kall Hey. I have a question about this model, idle wanting to set the average gas, then it springs to high revs, do you know or someone can know what might be the reason? Thank you in advance for your answer, best regards.
ANTY vag hi! Sounds like you have some problems with the carburetor, perhaps a air leak? These engines don’t have any governor so you have to adjust the speed depending on the load. Good luck with your problem, my Agria is decommissioned right now as I have a heavy oil leak from the gearbox somewhere. I will fix it sometime when I have time.
Nils Kall thanks for the hint I found the reason is not the original gas line with the gas lever will lightly move the armor of the rope or will move the steering wheel the line will move and adds gas. I wish you a successful repair. greetings
Zockverbot Der Ölstand war in Ordnung, ich glaube, die Kamera hat mehr von diesem Geräusch aufgenommen. Jetzt ist es jedoch sehr undicht! muss das eines Tages beheben.
is this a 4 stroke engine ? Then be careful when tilting it to that angle because of the lubrication
Yes, 4-stroke. You are correct about oil level and this is described in the manual. The oil level is adjusted according to what work is performed. Thanks for your observation! Regards Nils
@@NilsKall hi there, strange cuz when i check the 2400 specs it says it is a 2 strokes, i m confused, nice video thanks
@@cusoonmyfriend3738 hi! There are 2 engines available for the 2400, the NSU 65 that I have (4stroke) and the Hirth 110M2 (2 stroke engine)
@@NilsKall hello thanks for the answer, yeah i ve read Hirth on the one i ve seen, thx
Are the handles supposed to be that low? It looks really bad for your back...
Joel Kall nope, its easily adjusted but for some unknown reason I didn’t change height. Guess im a sucker for pain.🤪
Cześć. Mam pytanie odnośnie tego modelu, na biegu jalowym chcąc ustawić średni gaz to po chwili wkreca się na wysokie obroty czy wiesz lub ktoś może wie jaka może być tego przyczyną? Z góry dziękuje za odpowiedź, pozdrawiam.
ANTY vag sorry could you google translate that for me? Regards Nils
Nils Kall Hey. I have a question about this model, idle wanting to set the average gas, then it springs to high revs, do you know or someone can know what might be the reason? Thank you in advance for your answer, best regards.
ANTY vag hi! Sounds like you have some problems with the carburetor, perhaps a air leak? These engines don’t have any governor so you have to adjust the speed depending on the load. Good luck with your problem, my Agria is decommissioned right now as I have a heavy oil leak from the gearbox somewhere. I will fix it sometime when I have time.
Nils Kall thanks for the hint I found the reason is not the original gas line with the gas lever will lightly move the armor of the rope or will move the steering wheel the line will move and adds gas. I wish you a successful repair. greetings
irgend wie klingt das, also wäre kein getriebeöl drauf :D
Zockverbot Der Ölstand war in Ordnung, ich glaube, die Kamera hat mehr von diesem Geräusch aufgenommen. Jetzt ist es jedoch sehr undicht! muss das eines Tages beheben.