GT-R - Fuel Injector Clinic (FIC) vs Injector Dynamics (id)

visit import2race.com In this video we show you the difference between the Fuel Injector Clinic (FIC) vs Injector Dynamics (id) Watch the video and see the difference between them.
/ 127446427265596

[@pheonixfps9248]

albeit that they seem similar, for arguments sake, a dyno run comparison would be interesting too see....

[@boosted2.4_sky]

they both start with a Bosch platform but its the inside that matters... injector dynamics enhances the operation better than anyone.. and they have the research and development data to prove it...

[@Rotorzilla]

Can you flow them? I would like to see how the if there is a difference in the spray pattern

[@green_comet83]

He never showed the flow sheets... :(

[@FUELEDmag]

Awesome video very instructional. Im agree with 209sub0 please make more videos like this!!

[@sklyrovka]

ID just works. I see no reason to ever buy anything besides their injectors. Even for applications where their smallest 725cc product is way over spec.

[@kylepasta]

Similar on the outside,
But the id1000 are flow tested and matched before they are sent out
You get what you pay for

[@dinerosrt]

nice

[@kentmocc]

so what is the price difference between the two?

[@PreludeDude]

So 10 years later, are FIC still nearly the same to the latest ID?

[@boosted2.4_sky]

the outside of the fuel injector means absolutely zero if the dynamic operationof the injector that counts...

[@LordLoMR2]

I had FIVEOMOTORSPORTS injectors; same bosch body too. BUT their deadtimes varied so wildly that whenever temp compensation kicked in some of the injectors would stop working at idle. I would not get FIC, unless they do the same dynamic testing as Injector Dynamics.

[@Vlady_e30]

SO you say that FIVEOMOTORSPORTS are shitty? I want buy some 1000cc but I am not decided yet. If buy FiveO, go for expensive IDs, or buy for example 12pcs bosch EV14 560cc injectors(30euro per piece), make decap and take it on bench.

[@LaimisBMW]

@@Vlady_e30 12pcs. is not enough for flowmatching.

[@Vlady_e30]

@@LaimisBMW Post was 2 year old. I went more expensive way. I bought ID1050x in my m50b25nv hx35 engine.
Result: I will never buy shittty injectors in my cars.
ID1050x is very good. No problem with idling, no problem on emmission test. My car idling at 700rpm and 1.00 lambda like nothing. My friend have same engine but siemens deka 630cc, and there is not possible to idle under 1200rpm at 1.00 lambda. 1000rpm he must have 0.9lambda so dont pass emmision test.
So yes ID are more expensive, but nobody make that good flowmatch like they.
Laimis, I got now 0.8bar of boost. I want go higher like you on stock unoppened motor, same setup as you, can you help me?

[@LaimisBMW]

@@Vlady_e30 Good choice ! You can email me laimisbmw @ gmail com

[@FragNet0]

so the story is 1 from bosch is concidered as real.... adn the other one as imitation ???? but they are both as good or the imitation is even better ??

[@209sub0]

MORE FUCKING VIDEOS LIKE THIS PLEASE!!!!!

[@fordfocusonme]

I giggled when you asked to see the two tips...hehehe...

[@XXJULIUSXX1993]

@09gfdsa do want a medal for that ?

[@WhiteGravey]

you guys should release some honda accord videos that way all us broke ass youtubers can relate...

[@serchmarc]

WHAT BENCH DID THESE MANUFACTURES USE TO MAKE THA CALCULATIONS ? DAMN MAN NOBODY KNOWs

[@HowardSupra]

I know this comment is super old but they make there own benches to test at this level. The benches that are more accurate but widely produced simply can't flow the required fuel volume to keep up with injectors of this size.

[@RanovBR]

not run?

[@supraanon1914]

Don’t I’d just decap there’s and mil the end ?

[@jcdeng]

so it really doesn't matter which brand to get since they use the exact same core.

[@kief4diamonds]

when it comes to Price...FIC wins. however when it comes to E85 I.D. has special rights to the billet injectors from bosch in the 1300cc series and soon the 1600cc will be out. they will not lock or be harmed by e85.

[@bangetek]

FIC's suck I have a set of 1100's and one has been back to them twice for sticking and they send it back cleaned and still sticking

[@crusader7091]

Exactly this! My FIC1200 stick all the time I’m tired of their crap products

[@CelebesViking]

Both came from Bosch with adding/remove some sticker,oring and injector tip. Better buy Bosch,much cheaper

[@ImportRace]

Thanks for the heads up

[@09gfdsa]

FIRST
WHOOO!!!!!

[@geoh7349]

not even close to the same. the housing is the only thing that is the same.

[@SIRICKO]

The ball and seet are not the same!

[@ImportRace]

your right

[@ImportRace]

facebook.com/pages/import2racecom/127446427265596

[@tonyherbert537]

Check out ASNU Performance Injectors -! say no more !!

[@SIRICKO]

lol Facepalm

[@ActionArcadeHQ]

@09gfdsa first to comment, last to get laid

[@kaipos8601]

Literally useless