How to Check Solenoid Coil With Multimeter or Magnetic Test in Hindi/Urdu.

A solenoid consists of the coil, the tube, and the armature. The solenoid coil is working in the circuit and can be worn out. As the main part of a solenoid, solenoid coil is replaceable when it’s not working. But how can we determine it is good or bad?
Here is the way to check solenoid coils with a digital multimeter. A typical digital multimeter is used to measure voltage (volts), current (amps) and resistance (ohms). It is a tool easy to use for diagnosis in the electrical industries.
Step 1. Set your multimeter on ohms. If the multimeter is not automatic, set it on 2k ohms.
set multimeter
set multimeter on ohms
Step 2. Place the probes of multimeter across the pins of a solenoid coil. If you find 3 pins there, one of them is a flat pin which is connected to the ground. What you need to do is connect the other two pins with the multimeter.
solenoid coil
solenoid coil
Step 3. Read the number on the multimeter. A functional solenoid coil normally has its resistance within a certain range. This range varies from manufacturer to manufacturer, but definitely not zero. If you have 0 ohms, it means the coil is shorted. While the infinity read indicates the coil is open, the wire is broken inside.
multimeter read
multimeter read
Particular cases. Sometimes you find a normal read on the digital multimeter but the coil is actually not functioning. At this time, you can use a screwdriver and put it near the armature then energize the solenoids. If there is a magnet in the presence, the coil is good. Otherwise, it is bad, and you need to change a new one.
You will find it’s easy to test a solenoid coil follow the rules above. If you do have a bad solenoid coil, replace it with a new one. It’s very easy to change a solenoid coil.

[@abhindarji]

हमारे या हर प्रकार के coils बनाए जाते है तो किसी भाई को चाहिए हो manufacturing rate पर बिना किसी कि commision से तो reply kre

[@praveenk5019]

Sir turbidity meter how to check 4-20ma and setting video sir

[@ronakparmar6717]

How to calculate turns per volt?
Agar hame khood se ek solenoid coil bana na hai to kaise ye pata laga sakte hai ki kitne volt pe chalaga?

[@prabinbhaskar9687]

Ac me kaise magnetic banata hai bab ki south north pole varry karta hai due to alternating current

[@mdkhalidansari7003]

Coil hai to resistance check Karna hai

[@engineeringconcepts]

Yes u are right dear we are only explaining how to check easily

[@priyankmistry3807]

Bhai jis coil mai continute aayenge vo coil short hai faulty aur jis coil mai continute nahi aayenge vo coil ok hai

[@laxmikantmishra3265]

Bhai CNG kit me yah coil bahut heat karne lagta hai 10 minutes me is ka solutions kya hai

[@anishkhan6484]

Resistance kitna hota hai

[@passionparmeshwar2725]

Very good sirjee

[@abidhasan7414]

4way wall Kitna ka aata hai

[@VishalJadhav-dx1gy]

Nice explainaination sir

[@MDAhmad-ov4nw]

Thank you brother

[@engineeringconcepts]

Welcome

[@parveenjain6232]

pl advise how to use 24 volt d.c coil with 220 volt supply. Is any convertor plug available. pl reply

[@engineeringconcepts]

Uses relay for 230 to 24 volts dc

[@yasinkhan8934]

Sir You Can Use Relay Or Smps It's Convert AC To DC

[@taiseenkhan7998]

Nice

[@harishmagar1993]

Nice sir

[@EngineeringKoncepts]

Good information