This is exactly what we needed, I was so pissed at the performance of a brand new tracker 90, I felt ripped off and just blew my money on a joke then found this video and now it runs like an actual atv should, went from 10 to 15 mph to 30 plus mph and no more stupid rev limiter constantly being triggered, I understand safety features but they over kill the safety crap on tracker atvs, leave the speed decisions to the parents and have control of said features not for the company to decide how fast I go, anyway I'm ranting, I was pissed but thanks to your video I'm now happy
Thanks for the video. Just did this to my sons utility arctic cat. I can’t believe that little bushing makes that much difference! It’s like it added an extra gear.
I can vouch for this mod working on 2010 and 2011 Arctic Cat (utility) 90's. Two additional tips: (1) there are a couple of spacers (small bushings) sitting in the bolt holes between the outer case and the main block. Don't lose 'em. (2) One of the bolts was shorter than the others, and you need to make sure it goes back in the correct hole. The difference was amazing! Thanks!
Pretty much the same process for Can-AmDS 90s my only advice would be to trim or cut that spacer and not remove it all together because you risk throwing your belt. if the clutch compresses too much the belt pops off the top
Great video, very helpful! Just attempted and could not get the 17mm nut to break, even with a 20v Dewalt 3/8" impact.. any tips for that? I noticed your video and others dont actually show the nut breaking loose, only removal. Thanks!
Can you show how tondo a 2020 kymco mxu270? Damn kymco says it wont void my warranty, but refuse to tell me how to do it. The dealer I bought this from has no clue as to what Inam talking about. Another dealer, farther from my home said they know exactly what I am talking about and that they would do this free of charge. Of course, no service department is in due to the virus crap. Thanks.
Hi ! I just recently bought a 2020 kymco Mxu 270 and have been interested in this small mod ! I was wondering if you actually got this done and if it worked for you or not ! Please let me know , thanks !
I get all the way to exposing the belt drive and putting that 17 mm socket on that center bolt but the belt drive turns with the bolt. How did you keep it stationary so you could loosen that center bolt?
Will this work on the 50 model too? It seems to be on the rev limiter all the time. It's the right size for my kids but they need a little more speed. Throttle stop is completely out so if this will give us even 1-2 mph it will be big for them.
I just bought a 2020 kymco mxu 270. Will this work for that as well. I can find no video or any instructions anywhere. Dealer doesn't know what I am talking about.
Tried this on my sons ac 150. The spacer was already removed. The thing is almost new and very disappointed how slow it is. Won’t buy another arctic cat.
I have a 2012 Kymco Mongoose 90r sport atv with most likely around the same 90cc engine. If i remove the hose and then take off the cvt cover, will transmission oil or any kind of fluid spill out. Thankyou
You Rock my man! I just did this to my daughters 2022 tracker 90. It easy double the speed. Only took my 13 minutes. This trick is Amazing!!!!!
This is exactly what we needed, I was so pissed at the performance of a brand new tracker 90, I felt ripped off and just blew my money on a joke then found this video and now it runs like an actual atv should, went from 10 to 15 mph to 30 plus mph and no more stupid rev limiter constantly being triggered, I understand safety features but they over kill the safety crap on tracker atvs, leave the speed decisions to the parents and have control of said features not for the company to decide how fast I go, anyway I'm ranting, I was pissed but thanks to your video I'm now happy
Thanks for the video. Just did this to my sons utility arctic cat. I can’t believe that little bushing makes that much difference! It’s like it added an extra gear.
I can vouch for this mod working on 2010 and 2011 Arctic Cat (utility) 90's. Two additional tips: (1) there are a couple of spacers (small bushings) sitting in the bolt holes between the outer case and the main block. Don't lose 'em. (2) One of the bolts was shorter than the others, and you need to make sure it goes back in the correct hole.
The difference was amazing! Thanks!
THANKS
I also vouch for this video. Just did it to my 2009 Arctic Cat DVX90. Worked like a charm!! Simple and easy. Well explained in this video 👍👍
I did this exact same thing to my sons 2014 dvx 90 and it was thanks to this video and was real easy to do a no brainer for sure.
Thanks that helped me and my Dad a lot
Try changing the weights and springs that will let you build higher rpms to take off faster. On the centrifugal clutch
Thanks for the video man, made this a bit more scarey for my neighbors kid :)
My kid can keep up to me after doing this and has full power to do donuts he loves it!
Best part is the necessary tools can easily be rented at your auto parts store. Sometimes for free at some.
excellent video Allen Thanks brotha imma try this on my 500 arctic cat
Lol
Pretty much the same process for Can-AmDS 90s my only advice would be to trim or cut that spacer and not remove it all together because you risk throwing your belt. if the clutch compresses too much the belt pops off the top
Great video, very helpful! Just attempted and could not get the 17mm nut to break, even with a 20v Dewalt 3/8" impact.. any tips for that? I noticed your video and others dont actually show the nut breaking loose, only removal. Thanks!
Thanks man that really helped!!
ColbyFiegl yes slot my four Weller goes 35 now
Can you show how tondo a 2020 kymco mxu270? Damn kymco says it wont void my warranty, but refuse to tell me how to do it. The dealer I bought this from has no clue as to what Inam talking about. Another dealer, farther from my home said they know exactly what I am talking about and that they would do this free of charge. Of course, no service department is in due to the virus crap. Thanks.
Hi ! I just recently bought a 2020 kymco Mxu 270 and have been interested in this small mod ! I was wondering if you actually got this done and if it worked for you or not ! Please let me know , thanks !
I get all the way to exposing the belt drive and putting that 17 mm socket on that center bolt but the belt drive turns with the bolt. How did you keep it stationary so you could loosen that center bolt?
Me too
Clutch holder.
Piece of wood.
Air or other impact.
@F150Screw2001 where whould u put the wood
is there a way that i can lock the belt? it keeps spinning when i try and remove the bolt
Did you figure that out I’m having the same problem
Did u figure it out
Is the clutch engagement high on these bikes? I got a allterra 90 and seems to be high
How does this matter to make it faster? What does it do?
I can't get the cover to budge. All 8 mm are removed.
Do you know if this Mod will work on my 2001 Polaris Scrambler 90?
Can the spacer break and cause problems to the quad
Will this work on the 50 model too? It seems to be on the rev limiter all the time. It's the right size for my kids but they need a little more speed. Throttle stop is completely out so if this will give us even 1-2 mph it will be big for them.
Have found it impossible to remove the nut
How tight should that 17mm nut be? Does it just seat with the impact?
2013 test ?? i am going to try
Will this work for a coleman 90 trail tamer
Did you do a top speed run before & after?
What oil is best for this dvx 90? I have the same one I just to know what is the best.
Will that work on a 2003?
Would this be the same for a 150? Because it has 2 limiters, and I dont want to screw things up
I just bought a 2020 kymco mxu 270. Will this work for that as well. I can find no video or any instructions anywhere. Dealer doesn't know what I am talking about.
Did you try? If so, did it work?
Does anyone make clutches for these? My son has a green 05 and its just to slow! Its a 90cc 2 stroke he should be smoking my other sons ktm 50!
50cc?
Yes it works on the 50cc pretty good
it works on a 2013 dvx90cc
Do you know if a 2005 DVX50 is the same?
I took all the 8mm bolts off the belt drive cover but it still won’t come off
Take the kick off the drive that sticks out the cover
Yep... I'm definitely going to do this to my kids' kfx 50.
Can i do this whit a kfx 50 2019 ?
thank you so much
Tried this on my sons ac 150. The spacer was already removed. The thing is almost new and very disappointed how slow it is. Won’t buy another arctic cat.
How fast could you make the thing go, and how. I've got an Arctic cat and I'm trying to make the best of it
Any for 2017?
Does that work on any automatica wheeler
Ray Guerrero yes
02/03 ds90 that was a typo on the last comment
Good video I need help locating the drain plug for the motor oil and where do I apply gear oil mine is 05
Mines moves when i try to loosen it any tips?
Having the same problem. I can’t get the center bolt off without nearly cranking the engine...
Because y’all have to use a impact they all spin that was my problem I was using a ratchet but u got my impact out and it did the job
Will this work a
On a Yamaha raptor 90?
I have a 2012 Kymco Mongoose 90r sport atv with most likely around the same 90cc engine. If i remove the hose and then take off the cvt cover, will transmission oil or any kind of fluid spill out. Thankyou
How do you take off the hose
Sem Verpaalen not sure what holes are you taking off
how do i get the nut off all it does is spin so i cant get belt off
Shayn Luciano impact gun
Does this works on a manual 150cc quad??
Tommy Green trick question? Dvx 90 centrifugal clutch, no gears just like a go kart..
Would this work on a Polaris predator 90?
I have sold a lot of Polaris 90s I don't believe they have a speed color I've never seen one mainly the Kawasaki and Arctic Cat
Does this work for Can am 90 DS x
Is this the same for a 2012 arctic cat 150
Zachary DeBiase yes
yes and will work on the Kawasaki kids ATVs
Same way for a 90cc kymco correct? Pretty much the same quads almost
Joseph D'Agostino did it work for the 90 kimco I have a 90 kimco mongoose trying to see if it works
I have 2 kymco 90 i need to do this to. Did it work for you guys?
Will this work on a dvx 400
Ha, no.
That bushing you took off help reduce clutch sticking and wear on the belt. Has absolutely nothing to do with speed
You are absolutely incorrect.
Does it work on a 07 árticat 250 automatic?
Would this trick work on a older model da 90 let’s say n 02-03?
Will that work on a 2012 can am ds70
Would this be the same for the alterra 90?
will this work with a mongoose 270 ?
Would this work on a Polaris predator 90 too?