KingSong S22 - Tire Change
Вставка
- Опубліковано 5 лип 2024
- Items:
Workstands
Black&Decker WorkMate - amzn.to/3AAi4bP
Motorcycle Lift - amzn.to/3Lvsz5p
Hex & Bits
1.5-8mm Hex Bit Set - amzn.to/41HOUn2
PH2 Philips Bit Set - amzn.to/41WgEE2
Metric L-shaped Hex - amzn.to/3VcVLTa
Other Tools
Tire Spoons & Valve Core Removal Tool - amzn.to/40IgYW5
00:00 - Start
00:20 - Tools Needed
00:34 - Seat Removal
00:48 - Decorative Top Removal
00:53 - Control Board Removal
01:12 - 2 Choices in Removing Control Board
01:36 - Phase Wire Cover
01:55 - Phase Wire Removal
02:10 - Secure Control Board
02:44 - Suspension Pin Removal
04:23 - Lift Body off Motor
04:31 - Motor Cable & Axle Bolts Removal
05:23 - Motor Frame Removal
05:39 - Tire Change Time
05:48 - Motor Frame Installation
06:15 - Axle Bolt Installation
07:03 - Motor Wire into Trough
07:35 - Motor & Shell Marriage
08:33 - Suspension Pin Alignment/Installation
09:38 - Phase Wire Installation
10:07 - Phase Wire Cover Installation
10:37 - Control Board Installation
10:58 - Control Board Secure
11:34 - Decorative Cover Install
11:47 - Conclusion - Авто та транспорт
Guys I Know I already put a comment under another video but, I'll do it again here : I've been doing EUC videos on youtube for 3 or 4 years now and I've been saying that someone should definitly just do tire change video for everywheel, and you are doing it !! The community needed that !! Thanks again
Thanks for the support and kind words !
This video is so useful, thank you a lot! Was afraid it might be tricky to do tire change myself, but looks pretty straight forward 😄
It’s pretty good. The motor bolts are a little hard to deal with
Very good video, I’d suggest this to anyone looking to work on their s22
Please do
Great video!
Thanks!
Thanks
The s22 is actually really easy to work on, you really appreciate that when it's apart. Mine spends 90 percent of the time in pieces, so I know this better then most s22 pilots.
I recently put a shinko 244 on for the trails in the mountains, amazing tire btw, and the fitting is perfect on the s22 14 - 2.75. I did the same screw driver trick to get the motor wires through the top.
Another great video, like the dinga ling dong at the end, makes me smile 😊
Haha. Hopefully you received those pins that are needed to get your wheel back in working order.
My 2nd Kingsong wheel.. and 2nd in total as well.
👏👌 thank you!
Love the choice of easy going music lol. Because working on the S22 is very easy (compared to most..)
I like the chill music for all the tire work videos so that it calms the soul
I couldnt remove motor screws . Changed tire diffrent way :) .
Hello, I like your tire change videos, keep making more, please. Your voice is good and the directions are easy to understand.
Be good if you can do a tire change video for each model of wheel made.
What torque setting do you use on the drill?
Hi Melt. I would love to do more - but I'm limited in the wheels I have access to, and time and effort spent making the videos. In the early days of the youtube, it's always tough to dedicate time into this side project. If you could share the channel and videos with people who you feel would benefit from this type of content please do as it helps immensely.
Slowly but surely we will try and get to as many as possible.
Abrams and Nikola plus please... good job on the s22 tire change 👌
I believe there is already an Abrams one. For the Nikola - I would need a volunteer to lend their wheel to me for filming purposes :)
Like!
Hello I would like to change my motor on the 22 can I use your technique of just removing motor wires and letting the motherboard connected ?
If you are changing the motor, yes you can. Just be careful not to press the power button :) while in the middle of pulling the cables out.
Thank you.
Two questions please.
1) What torque settings do we use for the screws. (If known)
2) Did you put fresh thread lock on the wheel screws?
3) What sort of heat did you use to loosen the old thread lock? (or, is a butane flame too fierce?)
1) I just make them hand tight with socket wrench
2) yes Fresh thread lock
3) impact screwdriver manual
@@2cells1pack I got all the screws off with an impact driver; except one which had to be redrilled and tapped.
All screws replaced with real High Tension steel ones.
wtf....rusty motor cable! eeek!
I now get a better sense of why Kingsong is still implementing this type of assembly on the upcoming S19, crossing my fingers that there are no catastrophic pitfalls that happen this time around at launch. I'm particularly interested in it the most as I prefer leaving my wheels completely stock out of the box so I'm more willing to adapt to a factory setup than dealing with velcro and pad positioning.
I'm dreading the thought of having to break the adhesion on my 18XL foam just to access the screws to open it up... but it still has enough tread to last 2 or 3 more seasons.
With every iteration - the goal is to improve step by step. I dread 18XL and 16X repairs because they hide everything under foam.
👌👍
you should not tell to use a hammer to loose the screws that hold the wheel to the slider. I did, and that leads to a displacement of the bearing that is inside, not very well glued.
The bearing displaces from leaning, doesn’t need a hammer to displace
What? I'm watching a "how to" tire change video and when we finally get to that part 5-6 minutes in, you say "I don't need to do a tire change so I'm gonna skip that part"?!? Also, you showed the tire spoons and valve removal tools saying 'what is needed' but then never used them or showed why. I know how to take my S22 apart from having to install sliders, but new to a tire change and wanted to know if I need to use any tire lube/sealant or anything else when I put a new tire on. Found out in another video where they actually change the tire. :/
Sorry, we will do better next time.
Getting the tyre out is 😢
It’s not that bad
@@2cells1pack took five hours for a motor swap
Managed to pop an inner tube as well in the process