For those of you looking to buy this unit now (2019), this video is spot on in every aspect. The only difference is that there is NOT a set screw on the impeller. I just bought this recently (thanks to this review) and it rocks. Will make modifications in the future, but stock it's great. I did not buy the dust accessory kit.
What mods are you planning? I have a unit very similar to this one as well (maybe from the same Chinese factory). It's way too noisy for my neighborhood.
Was going to respond right after you did then decided to look for my manual to my HF dust collector to check to see if it listed the set screw but when i canceled the comment it posted blank. Smartphones you know... I couldn't find my manual but my shop is a wreck at the moment I have watch all of your videos and watched your top hot build and i think i could do that one of these days when I have time. You always have lots of good to the point info. I have been using my HF dust collector with my planer and I have already empty 5 full bags of chips from it since I got it a few months ago and the planer produces smaller chips than the jointer. Until i can build a separator i will live with cleaning it out. One thing i did do to my HF DC is i widen the footprint on it mainly so I could reach the lock on the casters with my foot. Works great. Next step is the Wynn filter along with a separator. One it will happen. Keep posting the great videos Thanks again
That's cool, let me know if you find the manual. The build is pretty easy but there are other designs out there as well you might check out for other ideas/options. I'm glad you find good info in my videos. Widening the footprint is a good idea. I leave mine stationary at this point, so it's not a problem for me- but the locks are hard to get to for sure. Once you get a new filter and a separator, you will be in a whole new world. It's much easier to empty the can than to fight with putting on the bag. Tape helps to hold the bag up, but it's still a pain. Plus the filter stays clean for a long time with the separator. Take care, G.
I'm just now looking at buying this unit (probably today after work) and I want to thank you for your video. Very straight, common sense and practical use observations of the unit. For the $ you cannot expect top quality but the small flaws you pointed out can be lived with for my hobby shop. Thank you for the thorough and fair review. New subscriber earned.
I have no problem at all getting the bottom bag on the clips hold mine very well. I also have heard that some of the screws and other things were missing, but I guess I was lucky I have nothing missing on mine. I installed a dust deputy on mine and it works great in my shop.
+Steve Adams That's cool Steve. Mine never gets changed now since I built a separator to collect the chips and dust. Good to hear you clips hold the bag well as mine didn't. Other than the missing setscrew (which they don't even have a hole for now) I had just what I needed too. Take care, G.
I have a grizzely about the same. I took two supports to the bail that holds the air bag and put a half circle piece of duct tube and I hang all my hoses over it. Try that it works great and same foot print in the shop.
With the left handed thread of the bolt, the set screw is not needed because the spinning direction of the motor being opposite the bolt always tightens the bolt which is what is holding the impellar on the shaft, not the set screw.
Mitch Fenneman That's true. The manual does show a screw in the IPB. However, some have reported there is no hole in the impeller for one on theirs. They've evidently been changing things up over the years but still have not updated the manuals. Take care, G.
FTI: Since the left handed screw and washer holds the impeller in place. Jt is not likely to come off because the motor shaft is keyed to the impeller. The set screw serves as a backup safety device.
I agree. I first thought the setscrew was would be fastened to a flat on the shaft. It does have a key and the later versions don't even have a hole for a setscrew. Thanks for the post, G.
thank you..i bought the same HF....dc with extra hoses ports connectors etc....what I was a bit dissapointed with was the thin mil collector bag...it kinda scares me...but I've been sucking sawdust for years so this will be an improvement...
+dhimes3 No problem! Mine came with a pretty heavy mil bag, but I'm not sure what they're coming with these days. It will be a major improvement over sucking dust for sure. I put a Wynn filter one mine, and built a Thein separator as well. I highly recommend both. I have videos posted on each- the filter and the separator build. They might be useful as well so check them out if you like. Good luck, G.
Ghostses, thank you for this video and the way you present it. It is done in the way that makes learning easy. I've watched a lot of videos but they show how to soup up the dust collector & they are doing things and doing them so quickly that a Real newbie, beginner or someone who might be nervous to start Somewhere doesn't have a chance to learn at a real beginners pace. So thank you for your delivery & this video. This video is from a long time ago so I don't know if you still do them but I would like to see how you have put your shop together & to see another video on using this dust collector. Did you ever use the "blast gates" from your kit? How did you actually use them? How do you wheel your dust collector around or how to you have the hoses connected to your other equipment? If there is anyone who is willing, I'd like to see the same things from you or share your experiences. Harbor Freight. Yes Harbor Freight could be a mess sometimes but over the years their brand has gotten better. There are a lot of useful tools they have, especially for newbie/beginners that let you get started. With their membership club, monthly 20% off coupon and extended warranty and general return policy, you really can't go wrong. So if you can afford more expensive tools if you are a beginner, then go for it. If you are a newbie just at the stage of being curious & wanting to learn about woodworking, HF tools isn't a bad place to start. & yes they can be a HOT mess!. I had to go to the store THREE times when I bought my dust collector. The 1st time some of the screws & such were completely MISSING from the bag, so I went an they replaced the whole bag. I had better luck with that bag but there were 4 out of 6 specialized screws that were need & no jerry rigging would do. So I had to go back again & the INSTRUCTION book was horrible. So I went back again, returned all the other screws I didn't need or use from the 2nd replacement bag --- which they told me just keep ---and I JUST got the exact bolts etc that I needed. So with all of that, I am still a HF customer & I know it helps that it is only 5 miles from my house! Sorry for such a long post & thank you for any responses or ideas.
It's been a long time since posting for sure. I've torn down my setup and am in transition at this point. But I have used the blast gates and they've worked well. I have other videos posted on this but you'll have to look for them. Search my channel for Thein Separator. I believe I highlight it there. Overall, I'm still completely satisfied. Take care, G.
I bought on of these not to long after watching your video. Mine didn't have a place for a set screw maybe a newer model? I've been using mine for several months and it works great. I do have an issue when using the jointer and that the shavings clog up the intake. I need to build a separator so that won't happen but thats gonna have to wait.
I've heard reports from others that theirs did not have a hole for a set screw either. I'm guessing they were using up old stock which is why mine had a hole. It's interesting though, their online manual still shows a set screw in the diagram. Does you printed manual show one? It would be part 28. I can see how using a jointer would clog it up for sure. The grid on the inlet that prevent large chunks from making it to the impeller would snag shavings in a second. A seperator is for sure what you need. I have a series posted on how I built mine- if you haven't seen it. It works great and might give you some ideas. I also have a clip posted on testing the jointer with my separator. It caught all the shavings no problem. I've also been doing quite a bit of planing and it's working really well for that as well- but no video. Long story short- build a separator! You'll be glad you did. Dig around my videos if you like, you might find something useful. Good luck, G.
How many amps does that one draw? I bought the horizontal one with the single bag because almost everything in my house is 15A circuits. I still haven't taken it out of the box yet and am considering using my Ridgid shop vacuum with a Dust Deputy cyclone on a ~15 gallon plastic barrel instead.
+matermark For some reason your comment just showed up even though you posted it 4 weeks ago. Sorry about the delay. I do run mine on a 15amp circuit and also use my tools with it and have no problems other than the lights dimming. Sort the comments by newest first then look for one from logan. kes. It should be about 4-5 down the list. We covered this topic and how I use mine in greater detail. Hope it helps! Good luck, G.
I have one of these for over 10 years. Excellent value but it is not a miracle. I paid about $120 ten years ago. It runs fine, comparable to many 1 1/2 hp units. Cheaper can far better than most 1 hp units.
Hi G, Thanks so much for all your videos. I always learn something from each one. I bought this dust collector based on your review and I'm very happy with it. I'd like to ask you 2 questions about it. One, do you buy the optional extended warranties on products like this? Two, do you use a remote switch with your unit? I ordered the Dust Collector Remote Control Switch - 110V By Peachtree Woodworking - PW466 and I'm hoping it will work ok. The Amazon reviews indicate that it will. Just wondered if you used a remote and what your thoughts are on that subject. Thanks again for your great videos.
Thanks Hollis! I'm glad you enjoy what I post. Good to hear you're happy with the collector- I love mine. Personally, I never purchase extended warranties on anything I purchase. I don't know what one would cost for the collector but know I paid very little for the collector as it was. If anything goes wrong with it, I'll buy a new one. For me, it's also worth the gamble since I may be able to fix it myself. As for a remote, I just use an extension cord with an inline switch box. I keep the box at the tool and can turn it on and off with the switch. If I ever end up with a larger shop, I will definitely get one like you've noted. It's going to work great for you! Hope this helps and take care, G.
I don't think you did Jimmy. I don't believe I mentioned the rating. They claim it to be 1550 CFM. They might have inflated the number some, as most probably do, but I can say for what I do it works great. I think this is one of their must have items for sure. They're listing them at 209.99 right now. With a 25% off coupon, you could pick one up for 157.49 plus tax. You can find the coupon on this site- about halfway down the page. slickdeals.net/f/1276399-harbor-freight-coupon-thread Hope this helps and good luck, G.
It does and thanks - great review. I also built a separator out of a metal garbage can. It helps hold down the static electricity and keeps my collector bag practically empty. :D
I’ve had this same unit for about 5-10 years when it was 159 plus tax. Don’t use the plastic bags on the bottom. Buy a decent .5 or 1 micron cloth bag, it boosts the airflow big time
I have one more question do you think it would be possible to run this using a gas powered motor? Any ideas on how to do that? Im trying to use it to pick up leaves
That's an interesting idea, and I see what you're going for. I don't really have many ideas, but I bet it could be done. You would be limited to a 4" hose, and would have to cut out the X on the input so the material wouldn't get caught. I guess if you found a horizontal shaft engine that was the correct size for the impeller (I don't know the current shaft size) you might be able to fashion some way to secure the impeller housing to the engine. HF does sell clone Honda engines that get pretty good reviews. I know they sell units for this process, but they're probably pretty expensive. Not much help- but hope it helps, G.
Thanks for the info. I agree that this is an outstanding unit for the money. It works extremely well. I went with the pleated filter since I cut a lot of MDF. It may not be required, but it made me feel better since it's some really nasty stuff. Thanks, G.
I really wouldn't know Vic. I don't "think" cured concrete dust is combustible but I would check. It would probably clog the filter quickly. If I were to try it, I would use a separator before the collector (A Thien type or a cyclone) and add a hepa filter to the collector. I have videos posted on the filter, and a Thien separator I built. Even this type of setup might not catch the super fine particles. Hope this helps, G.
Rick Simmons That's a good question Rick and I don't know. I'm surprised HF doesn't carry replacement bags. They should since I would consider them a consumable item. I put a Wynn filter on mine and it came with three bags. I also built a separator that collects all the dust and chips before it hits the collector so I never have to change out the bag. If you do locate them, post back as it might help others out. Sorry I couldn't say and good luck, G.
At first I thought the shaft had a flat where the set screw would lock- to prevent it from rotating about the shaft. It turned out there is a key so a setscrew is not required. G.
If the threaded portion is large, say 5/8 threaded, then the set screw can really be not needed. The void intended for set screw could be just the option of the component, not quality control. I just look into my two DC's. One does not have any provision for set screw but the threaded portion is 5/8. One has set screw and still has a small threaded tip that looks to be only about 1/4 or 3/8 threads.
I agree, the hole may be a provision for another application. Others with newer units stated theirs didn't even have the hole. I went ahead and put one in mine, needed or not. Take care, G.
I don’t think it’s a set screw hole at all. I think it’s a balance hole drilled to balance the weight. Because some are saying that theirs doesn’t have the hole. Waiting on mine to be delivered so I’ll check mine when I get it.
***** I don't know how many amps it pulls Logan (especially the start-up draw) but I do have it on a 15 amp breaker. On my temporary setup, I'm running 2 florescent lights with 4 40 watt bulbs, my table saw, and chop saw. When I flick it on, the lights will dim until it comes up to speed. After it's on, I turn on the table saw and the lights dim again until it comes up to speed. Same thing with the chop saw but much less. I've never tripped the breaker but I do stagger my start-ups. If you have a fairly dedicated circuit you can use, you shouldn't have any problems running on a 15. Hope this helps. Good luck, G.
***** thanks for you help. even if this dust collector is only less than 15 amps how can you run another tool with it. I have heard of many others who have stated the same thing. makes me think that the dust collector might be a huge overstatement.
***** Logan, I believe the amperage is rated in peak amps. Unless I'm mistaken, which I could be, it might draw up to that upon the initial start up or under heavy loads but the running amperage should less. If so, when I start mine up, I wait for it to come up to speed before I turn on another tool and it's drawing less amperage then at start up. Then I start up my saw which will draw more amperage on start up as well, then less after up to speed. By staggering out the starting of equipment, I stay below the 15amp rating on my breaker. How far below, or what the tools are drawing at start up and when running at speed- I don't know. I might be wrong here in reference to peak amperage, but that's what I do and it works for me nonetheless. Take care, G.
***** I just got the dust collector yesterday and I thought that the picture on the box was just black and white, but no. The dust collector is now a nice shade of gray and the support poles are not black. it looks very nice. The motor changed too. it is now speced at 15 amps but is still 2hp and they added colling fins
***** That's cool Logan! I'm wondering if they finally change from green to the shade of gray color since it looks like it came from Grizzly..lol. I would rather have the color you got, but I can't complain. Hopefully with the motor specs you won't have any problems. Once you get it all setup and played with, let me know how it's working out for you. Take care, G.
I actually did about a month after shooting this clip. I built a separator and purchased the Wynn Nano .5 micron filter. Expensive filter, but it works great. The separator works great as well, and keeps the filter clean longer than it would without it. Take care, G. For others reference- Wynn filter: ua-cam.com/video/1ybTEuyn84I/v-deo.html Separator build part1 of 5: ua-cam.com/video/m3RuKFqYHNQ/v-deo.html Separator build update: ua-cam.com/video/IKouD589VA4/v-deo.html
Ron Mazzella No problem. I couldn't get access to mine to see the motor, but the manual didn't indicate anything about 220V. Let me know what you find out as it might assist others. Take care, G.
For those of you looking to buy this unit now (2019), this video is spot on in every aspect. The only difference is that there is NOT a set screw on the impeller. I just bought this recently (thanks to this review) and it rocks. Will make modifications in the future, but stock it's great. I did not buy the dust accessory kit.
Thanks for the update Ryan! Hope it serves you well. Take care, G.
What mods are you planning? I have a unit very similar to this one as well (maybe from the same Chinese factory). It's way too noisy for my neighborhood.
Does it get all the sawdust off your table saw?
Was going to respond right after you did then decided to look for my manual to my HF dust collector to check to see if it listed the set screw but when i canceled the comment it posted blank. Smartphones you know... I couldn't find my manual but my shop is a wreck at the moment
I have watch all of your videos and watched your top hot build and i think i could do that one of these days when I have time. You always have lots of good to the point info.
I have been using my HF dust collector with my planer and I have already empty 5 full bags of chips from it since I got it a few months ago and the planer produces smaller chips than the jointer. Until i can build a separator i will live with cleaning it out. One thing i did do to my HF DC is i widen the footprint on it mainly so I could reach the lock on the casters with my foot. Works great. Next step is the Wynn filter along with a separator. One it will happen. Keep posting the great videos Thanks again
That's cool, let me know if you find the manual.
The build is pretty easy but there are other designs out there as well you might check out for other ideas/options. I'm glad you find good info in my videos.
Widening the footprint is a good idea. I leave mine stationary at this point, so it's not a problem for me- but the locks are hard to get to for sure.
Once you get a new filter and a separator, you will be in a whole new world. It's much easier to empty the can than to fight with putting on the bag. Tape helps to hold the bag up, but it's still a pain. Plus the filter stays clean for a long time with the separator.
Take care,
G.
I'm just now looking at buying this unit (probably today after work) and I want to thank you for your video. Very straight, common sense and practical use observations of the unit. For the $ you cannot expect top quality but the small flaws you pointed out can be lived with for my hobby shop. Thank you for the thorough and fair review. New subscriber earned.
That's cool Michael. It's still working good for me. Good luck with yours, G.
I have no problem at all getting the bottom bag on the clips hold mine very well. I also have heard that some of the screws and other things were missing, but I guess I was lucky I have nothing missing on mine. I installed a dust deputy on mine and it works great in my shop.
+Steve Adams
That's cool Steve. Mine never gets changed now since I built a separator to collect the chips and dust. Good to hear you clips hold the bag well as mine didn't. Other than the missing setscrew (which they don't even have a hole for now) I had just what I needed too. Take care, G.
what is the CFM on this? and thanks for the Video
They claim 1550 CFM, but I'm sure that's inflated to a degree. Good luck, G.
I have a grizzely about the same. I took two supports to the bail that holds the air bag and put a half circle piece of duct tube and I hang all my hoses over it. Try that it works great and same foot print in the shop.
Good idea! Thanks for the tip. Take care, G.
You could use magnets to hold the bag in place. I found it is l lot easier.
Excellent tip! It never occurred to me. Take care, G.
With the left handed thread of the bolt, the set screw is not needed because the spinning direction of the motor being opposite the bolt always tightens the bolt which is what is holding the impellar on the shaft, not the set screw.
Mitch Fenneman That's true. The manual does show a screw in the IPB. However, some have reported there is no hole in the impeller for one on theirs. They've evidently been changing things up over the years but still have not updated the manuals. Take care, G.
FTI: Since the left handed screw and washer holds the impeller in place. Jt is not likely to come off because the motor shaft is keyed to the impeller. The set screw serves as a backup safety device.
I agree. I first thought the setscrew was would be fastened to a flat on the shaft. It does have a key and the later versions don't even have a hole for a setscrew. Thanks for the post, G.
thank you..i bought the same HF....dc with extra hoses ports connectors etc....what I was a bit dissapointed with was the thin mil collector bag...it kinda scares me...but I've been sucking sawdust for years so this will be an improvement...
+dhimes3
No problem! Mine came with a pretty heavy mil bag, but I'm not sure what they're coming with these days. It will be a major improvement over sucking dust for sure.
I put a Wynn filter one mine, and built a Thein separator as well. I highly recommend both. I have videos posted on each- the filter and the separator build. They might be useful as well so check them out if you like. Good luck, G.
Ghostses, thank you for this video and the way you present it. It is done in the way that makes learning easy. I've watched a lot of videos but they show how to soup up the dust collector & they are doing things and doing them so quickly that a Real newbie, beginner or someone who might be nervous to start Somewhere doesn't have a chance to learn at a real beginners pace. So thank you for your delivery & this video.
This video is from a long time ago so I don't know if you still do them but I would like to see how you have put your shop together & to see another video on using this dust collector. Did you ever use the "blast gates" from your kit? How did you actually use them? How do you wheel your dust collector around or how to you have the hoses connected to your other equipment?
If there is anyone who is willing, I'd like to see the same things from you or share your experiences.
Harbor Freight. Yes Harbor Freight could be a mess sometimes but over the years their brand has gotten better. There are a lot of useful tools they have, especially for newbie/beginners that let you get started. With their membership club, monthly 20% off coupon and extended warranty and general return policy, you really can't go wrong. So if you can afford more expensive tools if you are a beginner, then go for it. If you are a newbie just at the stage of being curious & wanting to learn about woodworking, HF tools isn't a bad place to start.
& yes they can be a HOT mess!. I had to go to the store THREE times when I bought my dust collector. The 1st time some of the screws & such were completely MISSING from the bag, so I went an they replaced the whole bag. I had better luck with that bag but there were 4 out of 6 specialized screws that were need & no jerry rigging would do. So I had to go back again & the INSTRUCTION book was horrible. So I went back again, returned all the other screws I didn't need or use from the 2nd replacement bag --- which they told me just keep ---and I JUST got the exact bolts etc that I needed. So with all of that, I am still a HF customer & I know it helps that it is only 5 miles from my house!
Sorry for such a long post & thank you for any responses or ideas.
It's been a long time since posting for sure. I've torn down my setup and am in transition at this point. But I have used the blast gates and they've worked well. I have other videos posted on this but you'll have to look for them. Search my channel for Thein Separator. I believe I highlight it there. Overall, I'm still completely satisfied. Take care, G.
I bought on of these not to long after watching your video. Mine didn't have a place for a set screw maybe a newer model? I've been using mine for several months and it works great. I do have an issue when using the jointer and that the shavings clog up the intake. I need to build a separator so that won't happen but thats gonna have to wait.
I've heard reports from others that theirs did not have a hole for a set screw either. I'm guessing they were using up old stock which is why mine had a hole. It's interesting though, their online manual still shows a set screw in the diagram. Does you printed manual show one? It would be part 28.
I can see how using a jointer would clog it up for sure. The grid on the inlet that prevent large chunks from making it to the impeller would snag shavings in a second. A seperator is for sure what you need. I have a series posted on how I built mine- if you haven't seen it. It works great and might give you some ideas.
I also have a clip posted on testing the jointer with my separator. It caught all the shavings no problem. I've also been doing quite a bit of planing and it's working really well for that as well- but no video.
Long story short- build a separator! You'll be glad you did.
Dig around my videos if you like, you might find something useful.
Good luck,
G.
How many amps does that one draw? I bought the horizontal one with the single bag because almost everything in my house is 15A circuits. I still haven't taken it out of the box yet and am considering using my Ridgid shop vacuum with a Dust Deputy cyclone on a ~15 gallon plastic barrel instead.
+matermark
For some reason your comment just showed up even though you posted it 4 weeks ago. Sorry about the delay. I do run mine on a 15amp circuit and also use my tools with it and have no problems other than the lights dimming. Sort the comments by newest first then look for one from logan. kes. It should be about 4-5 down the list. We covered this topic and how I use mine in greater detail. Hope it helps! Good luck, G.
Does it have a regular plug or a funky 20 amp plug?
It's a regular plug Bill. Take care, G.
@@ghostses Awesome thanks!
No problem! G.
I have one of these for over 10 years.
Excellent value but it is not a miracle. I paid about $120 ten years ago. It runs fine, comparable to many 1 1/2 hp units.
Cheaper can far better than most 1 hp units.
Agreed! G.
Hi G,
Thanks so much for all your videos. I always learn something from each one. I bought this dust collector based on your review and I'm very happy with it. I'd like to ask you 2 questions about it. One, do you buy the optional extended warranties on products like this? Two, do you use a remote switch with your unit? I ordered the Dust Collector Remote Control Switch - 110V By Peachtree Woodworking - PW466 and I'm hoping it will work ok. The Amazon reviews indicate that it will. Just wondered if you used a remote and what your thoughts are on that subject. Thanks again for your great videos.
Thanks Hollis! I'm glad you enjoy what I post. Good to hear you're happy with the collector- I love mine. Personally, I never purchase extended warranties on anything I purchase. I don't know what one would cost for the collector but know I paid very little for the collector as it was. If anything goes wrong with it, I'll buy a new one. For me, it's also worth the gamble since I may be able to fix it myself.
As for a remote, I just use an extension cord with an inline switch box. I keep the box at the tool and can turn it on and off with the switch. If I ever end up with a larger shop, I will definitely get one like you've noted. It's going to work great for you!
Hope this helps and take care, G.
Is the impeller metal or plastic?
Great question! The impeller is made of steel. Good luck, G.
+ghostses thanks so much that is a huge deciding factor
No problem! G.
I may have missed this - what is the CFM rating on this unit?
I don't think you did Jimmy. I don't believe I mentioned the rating. They claim it to be 1550 CFM. They might have inflated the number some, as most probably do, but I can say for what I do it works great. I think this is one of their must have items for sure.
They're listing them at 209.99 right now. With a 25% off coupon, you could pick one up for 157.49 plus tax.
You can find the coupon on this site- about halfway down the page.
slickdeals.net/f/1276399-harbor-freight-coupon-thread
Hope this helps and good luck, G.
It does and thanks - great review. I also built a separator out of a metal garbage can. It helps hold down the static electricity and keeps my collector bag practically empty. :D
Jimmy McNamara No problem Jimmy! Separators are great for sure. I get the same results from mine as well. Take care, G.
How about Dublin the bag at the top that would keep most dust in wouldn't it
Good idea Paul. Take care, G.
I’ve had this same unit for about 5-10 years when it was 159 plus tax. Don’t use the plastic bags on the bottom. Buy a decent .5 or 1 micron cloth bag, it boosts the airflow big time
Thanks! G.
Attach that exhaust bag to the exterior to collect that mess in your back yard. Periodically clean that bag out
+Joseph Mulherin
Good info Joseph! Thanks for sharing. Good luck, G.
I have one more question do you think it would be possible to run this using a gas powered motor? Any ideas on how to do that? Im trying to use it to pick up leaves
That's an interesting idea, and I see what you're going for. I don't really have many ideas, but I bet it could be done. You would be limited to a 4" hose, and would have to cut out the X on the input so the material wouldn't get caught. I guess if you found a horizontal shaft engine that was the correct size for the impeller (I don't know the current shaft size) you might be able to fashion some way to secure the impeller housing to the engine. HF does sell clone Honda engines that get pretty good reviews. I know they sell units for this process, but they're probably pretty expensive. Not much help- but hope it helps, G.
+ghostses thats exactly what i was thinking to do. Use the 6.5 ho predator engine. Ill have to see how it goes
uria711
That's cool. If you come up with something that works, let me know. Take care, G.
Been using one for years . for the money, it can't be beat and there's nothing wrong with 5 micron bag.
Thanks for the info. I agree that this is an outstanding unit for the money. It works extremely well. I went with the pleated filter since I cut a lot of MDF. It may not be required, but it made me feel better since it's some really nasty stuff. Thanks, G.
Can it handle concrete dust. I do grinds and would like to know thanks
I really wouldn't know Vic. I don't "think" cured concrete dust is combustible but I would check. It would probably clog the filter quickly. If I were to try it, I would use a separator before the collector (A Thien type or a cyclone) and add a hepa filter to the collector. I have videos posted on the filter, and a Thien separator I built. Even this type of setup might not catch the super fine particles. Hope this helps, G.
You know that I got a dust conditioner and I like it
Good deal, G.
where do you get more bags
Rick Simmons That's a good question Rick and I don't know. I'm surprised HF doesn't carry replacement bags. They should since I would consider them a consumable item. I put a Wynn filter on mine and it came with three bags. I also built a separator that collects all the dust and chips before it hits the collector so I never have to change out the bag. If you do locate them, post back as it might help others out. Sorry I couldn't say and good luck, G.
Why is a set screw so critical when it is mounted from the front with threads?
At first I thought the shaft had a flat where the set screw would lock- to prevent it from rotating about the shaft. It turned out there is a key so a setscrew is not required. G.
If the threaded portion is large, say 5/8 threaded, then the set screw can really be not needed.
The void intended for set screw could be just the option of the component, not quality control.
I just look into my two DC's. One does not have any provision for set screw but the threaded portion is 5/8.
One has set screw and still has a small threaded tip that looks to be only about 1/4 or 3/8 threads.
I agree, the hole may be a provision for another application. Others with newer units stated theirs didn't even have the hole. I went ahead and put one in mine, needed or not. Take care, G.
I don’t think it’s a set screw hole at all. I think it’s a balance hole drilled to balance the weight. Because some are saying that theirs doesn’t have the hole. Waiting on mine to be delivered so I’ll check mine when I get it.
Can the motor be rewired from 120v to 220v????
Ron Mazzella I don't believe so Ron but you might do more research to confirm. Good luck, G.
do you know how many amps it pulls. will it run on a 15 amp breaker?
***** I don't know how many amps it pulls Logan (especially the start-up draw) but I do have it on a 15 amp breaker. On my temporary setup, I'm running 2 florescent lights with 4 40 watt bulbs, my table saw, and chop saw. When I flick it on, the lights will dim until it comes up to speed. After it's on, I turn on the table saw and the lights dim again until it comes up to speed. Same thing with the chop saw but much less. I've never tripped the breaker but I do stagger my start-ups. If you have a fairly dedicated circuit you can use, you shouldn't have any problems running on a 15. Hope this helps. Good luck, G.
***** thanks for you help. even if this dust collector is only less than 15 amps how can you run another tool with it. I have heard of many others who have stated the same thing. makes me think that the dust collector might be a huge overstatement.
***** Logan, I believe the amperage is rated in peak amps. Unless I'm mistaken, which I could be, it might draw up to that upon the initial start up or under heavy loads but the running amperage should less. If so, when I start mine up, I wait for it to come up to speed before I turn on another tool and it's drawing less amperage then at start up. Then I start up my saw which will draw more amperage on start up as well, then less after up to speed. By staggering out the starting of equipment, I stay below the 15amp rating on my breaker. How far below, or what the tools are drawing at start up and when running at speed- I don't know. I might be wrong here in reference to peak amperage, but that's what I do and it works for me nonetheless. Take care, G.
***** I just got the dust collector yesterday and I thought that the picture on the box was just black and white, but no. The dust collector is now a nice shade of gray and the support poles are not black. it looks very nice. The motor changed too. it is now speced at 15 amps but is still 2hp and they added colling fins
***** That's cool Logan! I'm wondering if they finally change from green to the shade of gray color since it looks like it came from Grizzly..lol. I would rather have the color you got, but I can't complain. Hopefully with the motor specs you won't have any problems. Once you get it all setup and played with, let me know how it's working out for you. Take care, G.
Ditch the needle felt bag unless you want to catch pneumonia. A 1 micron pleated filter and plastic bag will save you.
I actually did about a month after shooting this clip. I built a separator and purchased the Wynn Nano .5 micron filter. Expensive filter, but it works great. The separator works great as well, and keeps the filter clean longer than it would without it. Take care, G.
For others reference-
Wynn filter:
ua-cam.com/video/1ybTEuyn84I/v-deo.html
Separator build part1 of 5:
ua-cam.com/video/m3RuKFqYHNQ/v-deo.html
Separator build update:
ua-cam.com/video/IKouD589VA4/v-deo.html
Good review,
Thanks! G.
Thanks G I will go by there tomorrow and see what it says on the motor Thanks for getting back to me.
Ron Mazzella No problem. I couldn't get access to mine to see the motor, but the manual didn't indicate anything about 220V. Let me know what you find out as it might assist others. Take care, G.
Nice review
Thanks David, G.
this looks like the Grizzly dust collector I just bought
They probably come from the same factory- just with different stickers and boxes. Good luck, G.
made in China???
Yes, G.