How to change front brake discs / front brake rotors on MINI COOPER 1 (R50, R52) [TUTORIAL AUTODOC]

Поділитися
Вставка
  • Опубліковано 22 жов 2024

КОМЕНТАРІ • 19

  • @autodocuk
    @autodocuk  Рік тому +2

    Attention! This video contains mistakes:
    3:12 - the tightening torque is 110 Nm, not 90 Nm.
    3:38 - the tightening torque is 30 Nm, not 35 Nm.
    We're sorry for the inconvenience 🙇‍♂

  • @ScottRoberts-r5d
    @ScottRoberts-r5d 2 місяці тому

    Thanks. The subtitles really helped.

  • @ogp12
    @ogp12 3 роки тому +7

    Great tutorial, but there is a mistake in the tools required, you need a torx T50 bit not T30

  • @andylenton3419
    @andylenton3419 3 роки тому +3

    Nice video. Just a thought, but I'm not sure I'd want to suggest spraying the copper slip on after doing the degreasing; someone a bit less careful might accidentally get some copper slip on the friction surface. I prefer to apply copper slip to the centre of the disc with a brush before degreasing the friction surface with brake cleaner, but each to their own.

  • @atakan196
    @atakan196 3 роки тому +7

    2:10 It's not T30, you need a T50!

  • @rcmoves7690
    @rcmoves7690 4 роки тому

    Good video very handy! Now to change mine!!

    • @autodocuk
      @autodocuk  4 роки тому

      Thank you for your feedback!
      We are glad to know our tutorials were useful to you.
      Stay tuned for more!
      Best regards,
      Autodoc team!

    • @autodocuk
      @autodocuk  4 роки тому

      Thank you for your feedback!
      We are glad to know our tutorials were useful to you.
      Stay tuned for more!
      Best regards,
      Autodoc team!

    • @rcmoves7690
      @rcmoves7690 4 роки тому +1

      Only problem I had was a very rusty disc retaining screw loads of oil hammering and gently working back and forth with my electric impact gun at low power and eventually it came loose, I wish they would use a deeper fat key socket on that ! Any way thanks again for the video 🙂

  • @garytinson
    @garytinson 6 місяців тому

    how comes you didn’t use a bleeder kit to stop air getting in to the chamber or is not necessary

    • @autodocuk
      @autodocuk  6 місяців тому

      This is not necessary; you can find information in the technical documentation for car repairs.

  • @arthurm4139
    @arthurm4139 4 роки тому +7

    2003 R50 base in the US has a T50 Torx rotor retainer screw. This video says T30. Don't be fooled.

    • @williambonac8157
      @williambonac8157 3 роки тому

      I was thinking that but what about Europe?

    • @atakan196
      @atakan196 3 роки тому +1

      @@williambonac8157 Same, T50, i bought wrong bit and found out after i took all my wheels off :s

    • @williambonac8157
      @williambonac8157 3 роки тому +1

      @@atakan196
      Last person to work on my car snapped the T50 so I didn’t have to worry about it

    • @Stealth360stealth
      @Stealth360stealth 11 днів тому

      Even in Europe it is a T50

  • @autodocuk
    @autodocuk  5 років тому

    Have a look at other videos on our channel:
    🔸 MINI MINI (R50, R53) car repair tutorial - ua-cam.com/play/PLWep5LzT0sxnr-PQsC4sdGUkJCSfuoZZ0.html
    🔸 How to replace rear shock strut on MINI COOPER 1 -
    ua-cam.com/video/G06WK8MORcQ/v-deo.html
    🔸 How to replace rear brake discs / rear brake rotors on MINI COOPER 1 -
    ua-cam.com/video/zezLLXqdnU4/v-deo.html
    🔸 How to replace oil filter and engine oil on MINI COOPER 1 -
    ua-cam.com/video/B3b9tGTOMXM/v-deo.html
    🔸 How to replace air filter on MINI COOPER 1 - ua-cam.com/video/CC4ln38KB-o/v-deo.html