Stand for Soldering Iron T210

Project page: go.like-it.lin...
Parts links below:
* QUICKO T12-S9 Soldering Iron Stand - go.like-it.lin...
* Teflon (PTFE) Bar - go.like-it.lin...
* Pogo Pin Connector - go.like-it.lin...
* Round Magne 5x5 mm - go.like-it.lin...
* Insert Nut M4 - go.like-it.lin...
* Cleaning Sponge Soldering Iron - go.like-it.lin...
* Cleaning Sponge Soldering Iron 12 mm - go.like-it.lin...
* Wood Screw - go.like-it.lin...
* TopZeal Filament ABS - go.like-it.lin...
Links to used tools:
* NOGA deburring tool and Blades - go.like-it.lin...
* Mini Metal Lathe - go.like-it.lin...
* Lathe Cutter Tool SDACR0808H07 - go.like-it.lin...
* Diamond tip DCMT070204 - go.like-it.lin...
* Drill Press Stand - go.like-it.lin...
* Coordinate X-Y axis Table - go.like-it.lin...
* HILDA Electric Drill - go.like-it.lin...
* Vise for CNC Small - go.like-it.lin...
* Flute Spiral Bits - go.like-it.lin...
* Two Flutes Straight End Mill - go.like-it.lin...
* Micro CNC Drill Bits - go.like-it.lin...
* Machine Screw Tap Set - go.like-it.lin...
* Thread Screw Tap - go.like-it.lin...
* Reamer Tool 3/4/5/6/7/8/9/10/11/12mm - go.like-it.lin...
* AIXUN T3B Intelligent Soldering Station With T115/T210 Series Handle - go.like-it.lin...
Thank you for every tip or donation,
it means great recognition for me and helps a lot to keep going!
Donate now: www.paypal.me/...
yoomoney.ru/to...
BTC: bc1qplpzq36ghw84hty4nn2zzu4ps4sdh4th0v93j8
ETH: 0xc766ebbeAa76aaf629788c8F99C33A8d80d48977

[@satcomhdtv]

What was wrong with original allloy part? Will presume the original on designed to accept both T210 and T245 handles. on their size.

[@V.Perinski]

this stand is not for handles like T210 and E245. Follow the link in the description (QUICKO T12-S9 Soldering Iron Stand) for the dimensions.

[@Ali36999]

🙂❤🌹🌹🌹

[@igorr2214]

Hi! Which soft do you use to modeling and print ? I've seen an interesting support pattern on the printed model in some your video. Which is the slicer app do you use? Thanks!

[@V.Perinski]

CAD programs are any, according to mood. And the slicers are mainly Cura and PrushaSlicer

[@igorr2214]

@@V.Perinski Thanks!

[@Not_Found_0]

Хочу ту коробку с пружинками 😆

[@V.Perinski]

Это результат огромного количества разборок ... :)
Может Телеграм? @perinski

[@user-mc6rf7do7z]

опасная штука, при нагреве от 200-300 (по разным источникам) градусов выделяет крайне ядовитый газ

[@V.Perinski]

Нет касания к жалу. У С-210 жал только кончик греется. Тефлон холодный полностью. А колечко , которое фиксируется в подставке совершенно холодное... Ну и тефлон начинает реагировать от 300 градусов и выше.

[@douglas2lilian]

😍😍😍😍😍😍😍👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

[@artstechnology7809]

👍👍👍

[@jasonponciano6823]

Are you using the 8mm lathe bit?
Also at 2:28, where did you buy that cutter?
Actually had the same mini lathe and looking for some cutting bit but most I see is too thick for the holder...

[@V.Perinski]

Yes, this is a standard 8mm thick bit holder. Links in the description are including the cutting plate. The links in the comments don't work.

[@jasonponciano6823]

@@V.Perinski I've checked the description again and it seems you haven't listed the cutter at 2:28...

[@V.Perinski]

@@jasonponciano6823 and this one... blanks from HSS are sold in the same place as everything else. enter in the search for HSS blanks. I just sharpened...

[@jasonponciano6823]

@@V.Perinski I see... thought it was a special cutter or something. Luckily I had a bench grinder so I can make some out of HSS blanks.