Yamaha Tracer 700 - spark plugs and air filter replacement

Поділитися
Вставка
  • Опубліковано 2 гру 2020
  • Hello fellow riders/youtube people.
    Today something for fans of yamaha tracer 700, a video about how to replace spark plugs without removing the radiator.
    It's not easy but doable, I have preventively deleted scenes where there were a lot of curses.
    As a bonus, replacing the air filter.
    I hope you will find it useful.
    Enjoy and ride safe.
    Music:
    The Reckoning by AERØHEAD / aerohead
    Creative Commons - Attribution 3.0 Unported - CC BY 3.0
    Free Download / Stream: bit.ly/the-reckoning-aerohead
    Music promoted by Audio Library • The Reckoning - AERØHE...
    Gualala valley by Scandinavianz / scandinavianz
    Creative Commons - Attribution 3.0 Unported - CC BY 3.0
    Free Download / Stream: bit.ly/al-gualala
    Music promoted by Audio Library • Gualala - Scandinavian...
  • Авто та транспорт

КОМЕНТАРІ • 52

  • @Hiveout
    @Hiveout 3 роки тому +4

    Did today the same. Service guys charge me £160 for 2.5 hours of work. I did it for 2.5 hours and paid £4.49 for the 14mil nozzle to unscrew spark plugs. Thanks a lot for that video mate, very usefull.

    • @MotoAndy
      @MotoAndy  3 роки тому

      Great, your very welcome 🙂

  • @BlazinBlades
    @BlazinBlades 2 роки тому +1

    I just put a down payment on a 2021
    Man, so much work to do these simple tasks and no room to work…
    Crazy!
    Thanks 🙏
    BB

  • @PAUL-yv2kk
    @PAUL-yv2kk 3 роки тому +2

    Sooner you than me Andy. Looks like trying to decorate the hall through the letter box 😂👍

  • @rghost1647
    @rghost1647 Рік тому

    Super manual. Thanks. One information; spark key 14mm must be very slim. Spark NGK: LMAR8A-9

  • @Jer0867
    @Jer0867 5 місяців тому

    Ridiculous amount of work to do what should be a simple task! In the early 80s, on my Suzuki GS550 (and on my Bandit 1200 a few years ago) changing all 4 plugs was a 15 minute job, without rushing! As my Tracer is running fine, I don't think I'll bother. It'll have an oil & filter change shortly, and a new battery, but that's it. If I notice any difference in performance, I'll do the plugs & filter then, but not before.

  • @pietroangolo3472
    @pietroangolo3472 2 роки тому

    Great work. very usefull, thanks a lot 👍

  • @victorjg7793
    @victorjg7793 2 роки тому

    Muchas gracias por el vídeo desde España, ya tenía ganas de ver como se hacía lo de cambiar filtro y bujias,un saludo..

  • @BeyondWrittenWords
    @BeyondWrittenWords 2 роки тому +1

    Being gynegologist or botteled ship builder is not required, but it helps

  • @daddystu7046
    @daddystu7046 3 місяці тому

    Am servicing mine bit by bit. Have to do it outside as no garage. Done the oil and filter, done the coolant. Was looking at these 2 next - seems I have to take the whole thing apart just for sparks and an air filter.

  • @emilsoberbro36
    @emilsoberbro36 2 роки тому

    Amazing!! Thanks so much! If you ever do valve clearance on tracer 700 then I would also appreciate the video very very much :)

  • @apriliaaars
    @apriliaaars 3 роки тому +1

    great video, looks hard job...

  • @mickleblade
    @mickleblade 3 роки тому

    That's doable, I'm just remembering doing the plugs on my wife's R6....

  • @SixSix9
    @SixSix9 7 місяців тому

    Спасибо братишка !

  • @tarasb.ukrainian1947
    @tarasb.ukrainian1947 3 роки тому

    👍👍

  • @terrygrandchester5383
    @terrygrandchester5383 3 роки тому

    Nice tuto !
    - You forgot a sequence for disassembly the 2 little red front panels. After the 2 red side panels, and before the 2 black side panels.
    - If those front panel are not removed, it is not possible to access to the fifth screw of black side panel

  • @marcelo71108
    @marcelo71108 3 роки тому

    👏👏👍

  • @francescorossi9875
    @francescorossi9875 2 роки тому

    Hi , how long must the extension be to be able to unscrew the candles?

  • @sebastianescudero8712
    @sebastianescudero8712 3 роки тому

    Thank you very much for the video. Shit I have the 2020 model. Now i know why the yamaha dealer in switzerland told me that the short Inspection will cost 400 francs ant the big one 1000 francs.. i asked after a signed the contract... 😞

  • @gajdanviktor2774
    @gajdanviktor2774 3 роки тому

    Thanks for the video,I have just done it,although I have a problem engine warning lights on.
    I did miss a connection but after I found it it stayed in the dash.
    Any idea?
    Bike run ok

    • @MotoAndy
      @MotoAndy  3 роки тому

      I know what you mean, the same thing happened to me, you need to delete errors in the ECU, or buy yourself a cheap fault code eraser, or go to a dealer to do it to you

    • @gajdanviktor2774
      @gajdanviktor2774 3 роки тому

      @@MotoAndy Thanks!-I thought the same,but wasn't sure about that!
      Thanks for the quick reply!
      Don't you have a good videoabout replacing chain and sprockets?😁
      I know I getting greedy😁😁

    • @MotoAndy
      @MotoAndy  3 роки тому

      @@gajdanviktor2774 not for this bike

  • @krisztiancseh7922
    @krisztiancseh7922 2 роки тому

    Hi Andy. I have a question for you: is it necessary to remove the fuel tank if i want to lead the wire of the USB charger to the battery?

    • @MotoAndy
      @MotoAndy  2 роки тому +1

      If you have very small hands everything is possible, just try it,

    • @krisztiancseh7922
      @krisztiancseh7922 2 роки тому

      @@MotoAndy great, i will first remove the plastics, hope that will be enough. Thanks for the videos and the answer

  • @TRON_INTERCEPTOR
    @TRON_INTERCEPTOR 3 роки тому

    Cuanto tiempo se tarda en cambiar filtro aire y bujias? Gracias

    • @MotoAndy
      @MotoAndy  3 роки тому +2

      si puedes hacer algo de mecánica, tomará 3 horas

    • @victorjg7793
      @victorjg7793 2 роки тому

      Si por que vaya faena en las motos antiguas era un momento en estas hay menos espacio y mas tornillos ja ja..

  • @bluerider698
    @bluerider698 2 роки тому

    Old spark plugs have many Kms ?

  • @BrizzleRocker
    @BrizzleRocker 3 роки тому

    Is that a restricted bike? I ask because of the snorkel on the air filter. I've just watched a video where it was replaced with a DNA filter that had a large hole instead.

    • @MotoAndy
      @MotoAndy  3 роки тому

      no, it's the standard 73hp model

  • @alss6852
    @alss6852 2 місяці тому

    Can you show us how to turn the "service spie" off?

    • @MotoAndy
      @MotoAndy  2 місяці тому

      Unfortunately, I won't be able to show it to you because I sold my Yamaha 2 years ago, but to delete the service message you need an ECU reader, a phone and an application for the reader.

  • @MrRui33333
    @MrRui33333 Рік тому

    hello,.. I would like to know,.. with how many kms, you did this revision,.. that is, these candles, how many kms will run!? because I have a mt 07, and I will also do an identical review,. oil,.. filters,..and once I have to dismantle everything, maybe it's better to change the spark plugs,..the bike is 2 years old and 15,000 kms, what do you think? Or change next time, like 20,000 km? thanks !!! and congratulations ,. good work !

    • @rghost1647
      @rghost1647 Рік тому

      not year but distance determinate service: normal spark change 15 000km, if spark are platinium change 40 000km.

  • @byjesseinshapepersonaltrai245
    @byjesseinshapepersonaltrai245 12 днів тому

    Hi , would it be possible to change air filter by only lifting the tank up as shown at 2:19 ?

    • @MotoAndy
      @MotoAndy  11 днів тому

      I think it's possible, I just wonder if it makes sense

    • @byjesseinshapepersonaltrai245
      @byjesseinshapepersonaltrai245 11 днів тому

      @@MotoAndyi mean , the disassembly of the full tank is something i look up against! Thats why , and i only want to change my airfilter to a k&n one.

    • @MotoAndy
      @MotoAndy  11 днів тому

      If you have small hands, try it, the filter should fit, but it will be difficult to unscrew it.

  • @markofiorovic1573
    @markofiorovic1573 Рік тому

    Hi, how many Nm on spark plugs?

    • @MotoAndy
      @MotoAndy  Рік тому

      Spark plugs 8mm - 8 to 10 Nm spar plugs 10mm - 10 to 12 Nm
      12mm - 15 to 20 Nm

  • @BlazinBlades
    @BlazinBlades 2 роки тому

    Does this bike use Iridium plugs?
    The one you took out looks ok, doesn’t it?
    After how many km did you preform this replacement?
    Thanks 🙏

  • @roadwarrior8560
    @roadwarrior8560 3 роки тому +2

    Great work but it's bullshit how they are designing these modern bikes,basic servicing should be easy, my old CB500 was so easy to work on, this puts me off modern bikes. that plus all the tech that's just going to go wrong and require a trip to a main dealer.

    • @MotoAndy
      @MotoAndy  3 роки тому +1

      I know what you mean, unfortunately everything is done like this now, motorcycles, cars etc

  • @ramonlora5914
    @ramonlora5914 2 роки тому

    Yo creo que la mano de hobra bale mas que la vujias y filtro jjj yo la pongo por se de gremio profeci9nal

  • @jaumebeltran524
    @jaumebeltran524 3 роки тому

    Thanks Andy 👍 my 13 years old Kawa Versys 650 is much easier to handle than Facer, it,s time to change it, but looking how difficult it is for Tracer.. I will think seriously on buying the new versys instead.

    • @MotoAndy
      @MotoAndy  3 роки тому +1

      You're right, the tracer is fun to ride, but very compact which makes it difficult to service unfortunately

  • @m3lvn415
    @m3lvn415 Рік тому

    With enough cursing one will eventually succeed.

    • @MotoAndy
      @MotoAndy  Рік тому

      hahaha yes, cursing definitly helps with this job

  • @volt8684
    @volt8684 3 роки тому

    I was thinking of one of these until i saw this - no thanks