Hey Mud Puppy, which tires would you prefer 30 Zillas or 28inch BKTs? I figure the weight may be close but zillas may still be lighter, wanted to know if 28 BKTs were worth the extra weight. Thanks man
Pretty different tire. The AT is more aggressive and has a thinner tread. They ride pretty smooth but they're a side-by-side tire not impressed with them on ATVs
I have a sxs and I was running the 30" Terache AZTEX on your recommendation a few months ago but I just got portals so I am looking at getting either 35" at 171 or 34" terache because I really did like the 30s. Which would you recommend?
@@MudPuppyOffroad could you do me a favor and measure your tie rod length on your yamaha wolverine from the tie end ball joint to the steering rack and give me a rough guess. Need to know for a project I'm doing.
How do you like those Outlaw 3's? Thinking of throwing some 28's on my Grizzly since i cant go 12" OG Outlaws and must use a 14" wheel... My 2012 Grizzly loved the OG outlaws..
@@MudPuppyOffroad okay thanks, is there much difference between the 33s and the 32s?, do you know if the tread spacing change or do you just lose an inch of height? I only have 14 inch wheels
No problem, just dont let the bike run for more than a couple seconds with diesel in the oil loop. It isn't an adequate lubricant. I would say 5 seconds at the most. Me personally, I just take the spark plug boot off when I turn the bike over while doing the flush, this way it still moves the oil around but the bike wont actually start.
Man I'd like to see 2 bikes same lifts etc and do a 31 inch tire shoot out hole for hole bkt171at vs outlaw 31 og
Appreciate the honesty and not holding back 🤣
Mud puppy more like Mud flops you always got your flippers on
Or to get a true comparison try using the same size tires across all for the same size wheel and don’t have them mounted.
I'll go buy one of every tire in every size just for you bud... oh wait they don't even come in the same sizes... lol
Tires look nice dude. Like the videos. Keep it up
30 zilla vs aztex for a 2022 grizzly 700 xtr? I have 27 zillas and they’re really nice but I’m wanting more height
Depends if you're okay with the traction it's probably stay with the lightest Tire you can
@@MudPuppyOffroad makes sense. I was also looking at sludgehammers too. Videos seem to show they’re pretty good too
@@jeremys8360 they are decent but they're kind of a balloon tire like a zilla
@@MudPuppyOffroad is there anything that the zillas are better at than the aztexs given the same size?
@@jeremys8360 they are lighter so the machine will feel quicker but that's about it they wear out a lot faster
So if you don’t do the cutting will they be almost the same weight? And are those beedlocks heavier than a regular rim???
Good comparison. Tire trimmer is interesting, Is there a minimum ply you would want to use that on?
The depth of cut is adjustable
Well shit lol I'd love to chrome but I can't find 16inch chrome. Just thinking the msa lok 1 or lok 2
Wheres a good website to get a wheel and tire set up in search or 29.5s
Hey Mud Puppy, which tires would you prefer 30 Zillas or 28inch BKTs? I figure the weight may be close but zillas may still be lighter, wanted to know if 28 BKTs were worth the extra weight. Thanks man
Zilla's by far
@@MudPuppyOffroad Nice man, thanks a lot
Maybe one day you can do a comparison of them off the rim and no trim.
Not dismounting tires just to weigh them lol
Be sure and review these after u test them for us
How could I make my outlaw 3's to stop floating really bad
My grandma with turf tires rips thru every and any mud hole with her stock 1 wheel peel electric golf cart, why do you need those tires man?
I’ve watched assassinators out perform all these tires on renegades.
In some situations they are very good but in most situations they are trash. Show Tire
Do you think after you put a cut on the bkt tread it pulled harder? I wanna get ol3s but im worried about the weight
They still suck after cutting them
Get aztex
What do you recommend for a 570 xmr?
28 aztex
Do you recommend me getting either 30 inch BKTS or 29.5 Outlaw 3’s for my Outlander 570 XMR?
Aztex
😂 😂 😂 the end comment of your video! So you don’t like backs?
30s are trash
I want them!!!!
What would u recommend 30 BKT or 31 OGs on a Honda 420 with a 35 % gear reduction
OG for most mud
How short do they run?
Is their a actual difference between the tr171 and the at171? I was told the at 171 are pretty smooth on the hard packed surfaces.
Pretty different tire. The AT is more aggressive and has a thinner tread. They ride pretty smooth but they're a side-by-side tire not impressed with them on ATVs
I have a sxs and I was running the 30" Terache AZTEX on your recommendation a few months ago but I just got portals so I am looking at getting either 35" at 171 or 34" terache because I really did like the 30s. Which would you recommend?
@@johnturner8098 34s did amazing on my rzr with 4" portals. 32s we're also impressive
@@MudPuppyOffroad could you do me a favor and measure your tie rod length on your yamaha wolverine from the tie end ball joint to the steering rack and give me a rough guess. Need to know for a project I'm doing.
How much does the 31 bkt at weight
Looking for the biggest tire i can run on my rancher 420 footshift really like bkts and the aztex any help would be appreciated
28-in Aztecs will clear but you'll want to give reduction eventually
Link to but the tire zipper
31 ol3 thought from what I read was 48 lbs just tire. You can get 32 juggs on 15 that weight 70 lbs
But I know you like alot of water. So floating is in your set up too. Like videos keep posting.
I had 32 juggs way heavier than 70 lbs
How do you like those Outlaw 3's? Thinking of throwing some 28's on my Grizzly since i cant go 12" OG Outlaws and must use a 14" wheel... My 2012 Grizzly loved the OG outlaws..
Why wouldn’t you go with 16”
@@ajlundyy why would I go 16"? I don't want a flashy big wheel machine. My SE came with nice 14" wheels.
@@SouthFLMudClub more run less tire less weight
Would a stock 420 spin 27" skinny wide zillas consistently?
Yeah footshift will
I had 28 all wide mudzillas and didnt have any problems
Had a 350 rancher that spun at 27” skinny wide setup so it should
So 30 bkts or 31 ol3s?
Ol3s for sure
Msa beadlock? Thinking the lok2
@@damonbridgmon7199 most tires I perfer the double beads lock but not really needed for ol3s. Those msa wheels are pretty heavy
I am lost at fair
First like
29.5 outlaw 2s or 29.5 outlaw 3s?
Both of those are way too heavy for me but if I had to pick one it would be the ol2.
@@MudPuppyOffroad I have a 850 outlander xmr I was just looking for the tire you think would do best on it
@@adamrhodes3395 33 aztex was my favorite setup on my High horsepower can ams
Measure like 32s
@@MudPuppyOffroad okay thanks, is there much difference between the 33s and the 32s?, do you know if the tread spacing change or do you just lose an inch of height? I only have 14 inch wheels
Where is the best location to to put a snockel on a 420 rancher
Bkt claims you can run that tire on and off road my cryptids are tearing apart what’s your intell on the bkt
they handle pavement better than most ATV tires
Mud Puppy i might give them a try
Second
First
Third
Sunk my dads kawasaki in the mud had too give it five oil changes
Diesel flush it a couple times then put in oil. Saves alot of $$$
Thanks
No problem, just dont let the bike run for more than a couple seconds with diesel in the oil loop. It isn't an adequate lubricant. I would say 5 seconds at the most. Me personally, I just take the spark plug boot off when I turn the bike over while doing the flush, this way it still moves the oil around but the bike wont actually start.
First