ഇങ്ങനെ ഉപയോഗിച്ചാൽ മോട്ടോർ കത്തി പോകുമോ ?What happens if we run high head pumps on low head sites.
Вставка
- Опубліковано 25 вер 2020
- For head calculation : വീട്ടിലേക്കു പമ്പ്സെറ്റ് എങ്ങനെ സെലക്ട് ചെയ്യാം ? How to do head calculation & Pump Selection. • വീട്ടിലേക്കു പമ്പ്സെറ്...
A short video on the needs of adjusting the discharge and maintaining minimum head. - Наука та технологія
ഹായ്, എനിക്ക് വയസ്സ് 63 ആയി, ഇത്രയും കാലം ഈ ഒരു വിഷയത്തിൽ ഞാൻ മനസ്സിലാക്കിയിരുന്നത് തെറ്റായിരുന്നുവെന്ന് മനസ്സിലാക്കിത്തന്നതിന് വളരെയധികം നന്ദി.
കമന്റ് ചെയ്തതിൽ വളരെ സന്തോഷം സർ.
Pumpukalude variety (mono bloc,centrifugal,self priming etc.)video munpu cheythittillenkil ningalilude simple aayi athu manasilakkan agrahikkunnu...ulla karym ullathu pole parayunna ee channel super aanu...Thank you Team TT.
Thank you so much Eldhose. Kuraye pumpkale kurichulla videos cheythitu. onu check cheythu noku. :)
Thankyou Eldo.. for you are giving general awareness and basic knowledge about the pumps .
Glad it helped bro 🤩
തുണ്ടത്തിൽ ട്രേഡേഴ്സ് എല്ലാ വീഡിയോകളും ഞാൻ കാണാറുണ്ട് പല ഇലക്ട്രീഷ്യൻ മാർക്കും plumber മാർക്കും എനിക്ക് പരിചയമുള്ള pump വിൽക്കുന്ന കടകൾക്കും ഞാൻ അത് അയച്ചു കൊടുക്കുന്നുണ്ട്. പല വീഡിയോകളും പല തവണ ഞാൻ കണ്ടിട്ടുണ്ട്. എല്ലാം വളരെ മെച്ചപ്പെട്ടതും വിജ്ഞാനപ്രദവും ആണ്.
അഭിനന്ദനങ്ങൾ!
എൻറെയും സഹോദരന്മാരുടെയും വീടുകളിൽ പല ടൈപ്പ് ഉള്ള പമ്പുകൾ ഉപയോഗിക്കുന്നുണ്ട്.
ഞാനൊരു ബിസിനസുകാരനാണ് പക്ഷേ, എനിക്ക് ഇതുപോലെയുള്ള ടെക്നിക്കൽ കാര്യങ്ങളിൽ വളരെ താല്പര്യം ഉണ്ട്. അതുകൊണ്ടാണ് താങ്കളുടെ വീഡിയോ സ്ഥിരമായി ഞാൻ കാണുന്നത്.
ഒരു കാര്യത്തിൽ വന്ന സംശയം തീർക്കാൻ ആണ് ഞാൻ ഈ മെസ്സേജ് എഴുതുന്നത്.
താങ്കളുടെ Ampere Vs Load സംബന്ധിച്ച് ഉള്ള രണ്ടു വീഡിയോയും ഞാൻ കണ്ടു . പലപ്രാവശ്യം കണ്ടു. കിണറിലെ
വെള്ളത്തിൻറെ ലെവൽ താഴ്ന്നാൽ ലോഡ് കുറയുമെന്നും ആമ്പിയർ കുറയുമെന്നും പറയുന്നുണ്ട്.
അതുപോലെതന്നെ വാൽവ് ഓപ്പണിങ് പകുതി അടച്ചപ്പോൾ വെള്ളത്തിൻറെ ഡിസ്ചാർജ് കുറയുകയും ലോഡ് കുറയുന്നതായും ആമ്പിയർ കുറയുകയും ചെയ്യുന്നു . വളരെ വിചിത്രമായി തോന്നി ആ പ്രതിഭാസം.
വെള്ളത്തിൻറെ ലെവൽ താഴുമ്പോൾ അത് മുകളിൽ എത്തിക്കാൻ കൂടുതൽ ശക്തി വേണമല്ലോ. അപ്പോൾ ആമ്പിയർ കൂടുതൽ വേണ്ടേ?
അതുപോലെ വാൽവ് ഉപയോഗിച്ച വെള്ളത്തിൻറെ flow പകുതി
അടയ്ക്കുമ്പോൾ വെള്ളം ഞെരുങ്ങി പോകുന്നതുകൊണ്ട് ശക്തി കൂടുതൽ ഉപയോഗിക്കുകയും ആമ്പിയർ കൂടുകയും ചെയ്യേണ്ടതല്ലേ.
താങ്കളുടെ വീഡിയോ കാണാത്ത ഇലക്ട്രീഷ്യൻ മാരോട് ഇക്കാര്യം ചോദിച്ചപ്പോൾ എല്ലാവരും ആമ്പിയർ കൂടുമെന്നാണ് പറഞ്ഞത്. അതുകൊണ്ടാണ് ആ വീഡിയോ വളരെ വിചിത്രമായ ഒന്നാണെന്ന് പറഞ്ഞത്. അപ്പോൾ അതിൻറെ തിയറി എന്താണ് ?
മെസ്സേജ് കണ്ടു .. ഒരു വോയിസ് അയച്ചിട്ടുണ്ട്.
സിമ്പിൾ ആയി പറഞ്ഞാൽ അളവിൽ കൂടുതൽ വെള്ളം എന്നാൽ ..പുറം തള്ളാൻ കൂടുതൽ എനർജി വേണം , കൂടുതൽ കറന്റ്. എല്ലാ പമ്പും ഡിസൈൻ ചെയ്തിരിക്കുന്നത് ഒരു നിശ്ചിത അളവ് വെള്ളം കൈകാര്യം ചെയ്യാൻ ആണ്.
@@thundathiltraders thanks
Entetum അതേ സംശയം പിന്നെ റിവേഴ്സിൽ കറങ്ങിയാൽ വെള്ളം എടുക്കുമോ 🤔
@@ibrahimk.v.maniyil6620 എടുക്കും പക്ഷേ ഇംപില്ലർ ലെവൽ ഓപ്പസിറ്റ് ആക്ഷൻ കാരണം പ്രഷർ ഉത്പാദനം നടക്കില്ല അതുകൊണ്ട് വെള്ളം പമ്പിൽ കിടന്നു പുറകോട്ട് കറങ്ങുന്നതിനാൽ പമ്പ് ഓപ്പൺ ഡിസൈൻ തിരിഞ്ഞായതിനാലും അതിന്റെ ഹോളിൽ നിന്നും പുറത്ത് റിവേഴ്സിൽ വരുന്ന കുറച്ചു ജലം പുറത്തേയ്ക്ക് വരും ശബ്ദം കൂടുതൽ മോട്ടോറിൽ വരും... കറൻ് ആംപിയർ കപ്പാസിറ്റർ ലെവൽ അനുസരിച്ച് വിത്യാസമുണ്ട് താനും....
ഞാനും ഈമേഖലയിലാണ് എനിക്കും മനസ്ലായ്യിട്ടില്ല ഈ തിയറി🤔🤔
വളരെ നന്ദി
ഇത് കുറെ കാലമായി
ഉണ്ടായിരുന്ന
സംശയം ആയിരുന്നു
വീഡിയോ വളരെ
ഉപകാരമായി
താങ്കൾക്ക് ഉപകാരപ്പെട്ടു എന്നറിഞ്ഞതിൽ ഒരുപാടു സന്തോഷം 🤩🤩🤩 Keep supporting . Thank you
. വളരെ ഉപകാരം നന്ദി.
Welcome 😇
GREAT AND INFORMATIVE . THANK YOU
Thank you sir 😇
ചെക്ക് ചെയ്തു തയ്യാറാക്കിയത് നല്ല അറിവ് good
വളരെ നന്ദി.. ഇനിയും വിഡിയോകൾ പ്രതീക്ഷികാം.
ഇതു ടെസ്റ്റ് ചെയ്തു കാണിച്ചതിന് നന്ദി.
Thank you so much for the support sir.
Tks .valuable information......
Welcome sir
You are giving good information
Try to use proper electric connections
Or use 🔌 point
Ok next time . Thanks for the sggestion
ഗുരോ..നന്ദി
😄
I think this happend because of power factor. Induction motor pf will be extremely low in low load at least good practical video
Thanks for the info sir. Thank you
താങ്ക്സ്.
Welcome 🤗
Very helpful video bro...❤️❤️
Thank you 😇
Very well explained. 👌
Thank you 😇
Thanks good information
Welcome😇
Very good information..
Thanks :)
Valuable information 👍
Glad you liked it
ചേട്ടാ ഒരുപാട് നന്ദി
Welcome 😇😇
പറയാൻ വാക്കുകളില്ല 👌👌👌💓💓💓💓💓superb വളരെ informative ആയ വീഡിയോ 💓💓😘😘👌👌👌✌️✌️✌️✌️
വളരെ വളരെ നന്ദി ബ്രോ 🤩🤩🤩🤩
Thank you for the video 😊
താങ്ക് യൂ സന്ദീപ് ബ്രോ
@@thundathiltraders Eatta
Prekshakarude doubts ningalde konde clarify cheyyan pattunnathanenkil innathe video pole idak upload cheytha helpful aakum.
Enik ariyillayirunnu etra head ulla pump enganathe stalathekku nokki vanganam ennu.
Innu ningalde video kande manassilayi.
Ingane oru demo video aayi tanne kaanichal very much helpful aakum.
Nyangalku kandale manassilaku, ningal explain cheyyunne kaal nallathe ingane oru cheriya video aanu.
This video was very much helpful.
Ningalde channel il 10K subscribers matre ullu enkil Enda.
Ullavar ellam genuine subscribers aanu.
Thank you for your videos and iam expecting more informative videos from you.........
Sorry for late reply bro..
satyam bro.. 10k ullenkilum nalla support anu ellavarum.. njan oridathu paranjapole ..ellavarudeyum support sherikum enne albhuthapeduthanu.
chila neagative karu undu.. ellayidathum ula pole avarum erikate :D
eniyum kazhivathum ethepole informative videos cheyyan sramikam bro
Good information 👍
Thank you :)
Nice Thank you .i will check with a valve and ammeter. What is the reverse function
Submersible pumps with wrong capacitor connection will run in opposite direction.
Sir can u put about motor starter upto 1to 25hp it will b help for to
Good thanks
Thank you 😇😇
Very informative experiment. What is the rated current of this motor ?
7.5A
Thanks
Welcome😇
Good information bro
Thank you so much 🙂
👍
Good information
🙏
2year.old.veegad.rotercamplinte.sparekittuo.plees
Dear Eldhose, Very important topic. One of the biggest issue is free running or less loaded motor rpm could be much higher and it will lead to bearing slow damage, finally destroying the total pump as time goes. When we rewind, we will have to change bearings etc as well in such cases. Thank you again for the excellent contents you choose. Neel
Thanks a lot for the comment sir. :)
My ekki deccan borewell submersible pump type ER40H-VR, 2HP, 40 stages pumps about 35 liter per minute. Amp shown on control panel is 15amp. Is the pump working at low head?
Considering the HP of your pump , consumption is normal. What is the site voltage once the pump is ON ? Total cable length ? 35LPM for a 40 stage pump is good discharge.
Good video
Thanks for the visit
Good......
Thank you! Cheers!
How to sellect a pump? And how to identify water level in a bore ?
I have 6 inch bore in this which pump is good ? Should I use sumersel or normal ? If sumersel then what size pump should be ?
The bore deep is 300 ft the distence between bore and building is 6 miter and what HP moter I have to fix ?
Since it is new site construction work will be going I want bring water at present only in grount level not building what to do ?
And how I can get your service in Manimala Village Kottayam Dist ?
Hello sir. Finding the water level is simple. Just tie something heavy to a rope and put it in and measure it. So we will know the current water level.
We can go for submersible pump.
How many liters of water are you planning to draw from the well in a hour ? We can select HP according to your discharge requirement.
👌
✌🏻
40 feet porwll 7 in haw mortar ?
2" submerseble motor price plez
Super
Thank you bro
👌👌👍👍
😇✌🏻
👍👍👍
താങ്ക്സ്
What was the hp of this Pump motor? What's the range of the pr. gauge used here?
1HP , range up to 7 bar
Our jet pump mono block pumpakky alteration cheyyan patrumo ,please explain cheyyan patrumo.
Cheyyan pattum ennanu viswasam
🙏
thanks
Texmo dewatere 1.5hp മിനിമം എത്ര ഹെഡിൽ ഉപയോഗിക്കാം.
♥️♥️♥️
🤩🤩🤩
Reverse and forward what is mentioning in pumbset
Impeller rotating clockwise and anti-clockwise
Hi bro, njan veetil use cheythirunne oru 1 HP 90 feet head ulla pump aanu. Athu ippo kedaayi athukondu puthiya pump edukkan decide cheythirikkuvanu. Ente veetil kinarinte bottom thottu water tank vare ulla height ekadesham 55 feet undavum. Puthiya motor edukkumbol 1.5 HP motorinte avasyam undo?
1HP mathiyavum.
Try EKKI-DECCAN , TEXMO-AQUATEX or shakti
Nalla veedio
Thanks 😇
What you mean reverse? Exchanging phase and neutral because of that motor rotation is reversed?
Exchanging phase and neutral will not have any effect in the motor rotation. If you change the winding leads , It will affection the direction of rotation.
That case how it affect termination? Bcoz customers will buy motor as a package and got 3 terminals (P,N,E in single phase) which going to connect directly to utility power. In such case what is the possibility of exchanging winding leads?
@@thinkseeeatthroughvickus4555 Some people tend to extend the cable with single colour wire instead of colour codded 3 corewire .It is one of the main reason for this.
@@thundathiltraders manasilayilla?
Hi how you reveresed the motor?
Capacitor connections reverse cheythal mathi
എന്റെ വീട്ടിൽ കിണറിന്റെ ആഴം 50 അടി ആണ്, തറ നിരപ്പ് 40 അടിയും ഉയരം 20 അടിയും ആണ്, ഇവിടെ ഞാൻ ഒരു 1 hp 80 അടി head ഉള്ള open well submersible pump ഉബയോഗിക്കുമ്പോൾ tank slow വായിട്ടാണ് വെള്ളം കയറുന്നത്, എന്തായിരിക്കും prblm, കിണറിൽ വെള്ളവും കുറവാണ്
1.5hpmotor 2nd floors topilanu hitil tallunath komd mottorin kuyappam undo
Motor head etra anu
ഉപകാരം എന്ന് പറയുന്നത് ഇതാണ്
Thank you :)
Do you have 12 volt DC motor.
Not available sir.
എങ്ങിനെയാണ് നിങ്ങൾ പമ്പ് റിവേഴ്സ് ചെയ്തത് ?
കപ്പാസിറ്ററിലെ വയർ ഒന്ന് തിരിച്ചു കൊടുത്താൽ മതി
🌹❤️💐
🤩
Agriculture
👍
Pressure switch ne Patti ore video cheyo
Cheyyamalo
Motor reversil work cheyyichal coil complient akule ?
കോയിൽ കംപ്ലൈന്റ്റ് ആവാൻ ചാൻസ് എല്ലാ. കാരണം കറന്റ് എടുക്കുന്നത് കറക്റ്റ് ആണ്. imepeller ഊരി പോവാൻ ചാൻസ് ഉണ്ട്
What is reversed working
Impeller rotating in the opps direction
Binu chettanu njangalude vaka oru haiiii✋
Adheham comment vayikarund . Ellenki njan parayam
വീടിന്റെ രണ്ടാം നിലയിലേ ടാങ്കിൽ നിന്ന് മൂന്നാം നിലയിലേക്ക് രണ്ടാം നിലയിലെ ടാങ്കിൽ നിന്ന് വെള്ളം പമ്പ് ചെയ്ത് എത്തിക്കാൻ ഏത് മോട്ടോർ വാങ്ങണം
Selfpriming pump suitable ayirikum
Open well submersible പമ്പിന് കപ്പാസിറ്റർ കൂടിയത് കൊടുത്താൽ ( അതായത് 40 mfd ക്ക് പകരം 60mfd കൊടുത്താൽ ) കരണ്ട് കൂടുതൽ എടുക്കുമോ?
Normal conditionil Current koodum.
മോട്ടോർ കൂടുതൽ ചൂടാവതില്ലേ 🤔
എന്താണ് റിവേസ് കണക്ഷൻ പോസ്സിറ്റിവ് നാഗറ്റീവ് മാറി കൊടുത്താൽ മോട്ടർന്റെ സ്പീഡ് and പ്രസർ മാറുമോ
Yes.conection mariyal Impeller reverse karangum
sir ടാങ്കിൽ വീഴുന്ന വെള്ളത്തിന്റെ എന്റിൽ ഒരു സ്പ്രിൻക്ലെർ conect ചെയ്താൽ മോട്ടോർ ലൈഫിനെ ബാധിക്കുമോ
Minimum discharge purathek pokumenkil kuzhappam illa
റിവേഴ്സിൽ കറങ്ങുക എന്ന് പറഞ്ഞു അത് എന്താണ്?
വയർ കളർ കോഡ് മാറി കൊടുത്താൽ ആണോ ഇങ്ങനെ കറങ്ങുന്നത്?
റിവേഴ്സിൽ കറങ്ങിയ വെള്ളം കയറുമോ
Yes. Colour code mariyam reverse rotation varum
Njan ente fish tankilekk 105 watts power 5mtre head ulla submersible pump vangi..enikk 2mtre head mathi...ith 5500ltre/hr filtration ullath kondanu vaangiyath...corrent kooduthal varumoo...pump complaint aakumo...please replay me..
Pump complaint akanda karyam ella. Current consumption thangal paranjathu pole 105 watts alle ulu ? Kooduthal current varanda karyavum ellalo
@@thundathiltraders head change avumbol problem undavumooo... 5mtr head ullath 2 mtr use cheythal...
Sadyatha illa bro. Max head 5 meter ulla pump easy ayi 2 meteril use cheyyam
@@thundathiltraders ok,thanks...
Core length coodiyal gunam kittumo
70-75mm kooduthal 1HP wind cheyarila.
15 മീറ്റർ ആയ മുള്ള കിണറ്റിൽ നിന്ന് വെള്ള മെടുത്ത് 15 മീറ്റർ നിരപ്പായ സ്ത്തലത്ത് കൂടി പൊയി വിടിൻ്റെ ഒന്നാം നിലയിലേ ട്ടാങ്കിലേക്ക് വെള്ളം എത്തിക്കണം അതിന് എത്ര HP യുടെ മൊട്ടർ വെണം എത്ര മിററർ ഹെഡ് ഉള്ളത് വെണം , ഈ സൈറ്റിലേക്ക് mono block,submersible ഇതിൽ എതാണ് നല്ലത് Pls Help
Whatsapp 7034904458
Self priming pumps zero head il work cheyyikkan pattumo?
Yes
ua-cam.com/video/V_w2_sowU6M/v-deo.html
രണ്ടാം നിലയിലുള്ള ടാങ്കിൽ നിന്ന് മൂന്നാം നിലയിൽ ടെറസിലേക്ക് വെള്ളമെത്തിക്കാൻ ഏത് മോട്ടോർ ഉപയോഗിക്കണം ടെറസ് ക്ലീനിംങ്ങ് പർപസിനാണ്
Selfpriming പമ്പ്.
Mono block reverse karangumo
Internal connections mattiyal karangum.
Experiment ഇന്റെ രാജകുമാരന്
:D hahaha
How can we calculate... horizontal length.... into... vertical height..??
It depends on the pipe friction. Will share a video on rough calculation .
ua-cam.com/video/040xhNIpzG4/v-deo.html
@@thundathiltraders dear Eldhos..👍... it's a useful video..!!!
1 hp ,5hp,7.5 hp etc ഇങ്ങനെ ഓരോ power ഉള്ള motors വച്ച് ,ഓരോ motor നും എത്ര height water pump ചെയ്യാൻ സാധിക്കും എന്നത് എങ്ങനെ calculate ചെയ്യും please. Reply
Ee paranja oro modelsinum almost 100 and above models und . Ellam vachoru video practical alla
@@thundathiltraders ഒരു approximate height ഉണ്ടാകിലെ അത് പറയുമോ ?Thanks for reply
ഈ വീഡിയോയിൽ പറയയുന്നു. Reverse തിരുന്നു forward തിരിയുന്നു . എങ്ങിനെയാണ് ഇത് മനസ്സിലാക്കുന്നത് / കണ്ടാൽ അറിയാൻ പറ്റുമോ, എവിടെ നോക്കണം.
Capacitor connection matti nokkiyal discharge marunundo enu check cheyyam.
Pump azhichu impeller check cheythalum mathi
@@thundathiltraders പുതിയത് മോട്ടർ വാങ്ങുമ്പോൾ തെറ്റാറു േണ്ടാ ? എങ്ങിനെയാണ് തെറ്റ് വരുന്നത് . എപ്പോഴാണ് നമ്മൾ നോക്കേണ്ടത് ,അതു കൂടെ പറയാമോ
@@anishpk6180 same colour wire use cheythu submersible cable extend cheyumbol sambavikarundu.
Puthiya motorinu pazhaya panel use cheyumbolum chilapol sambavichekkam
@@thundathiltraders ok . എനിക്ക് അറിവ് തന്നതിൽ നന്ദി ഉണ്ട്
ഹെഡ് കണക്കു കൂട്ടുമ്പോൾ ഒരു bendinu എത്ര മീറ്റർ കണക്കാക്കണം
Size anusarichu vathyasam varum. oru rough calculationayi 1.5-2feet edukam
വാൾവ് പൂർണമായും അടച്ചാൽ current വളരെ കൂടുമോ അതോ No load ആയി current കുറയുമോ ?
വാൽവ് ഫുൾ അടച്ചാൽ കറന്റ് കുറയുന്നതാണ് കാണുന്നത് . പക്ഷെ വെളളം ഓവർ ചൂടായി ,പമ്പ് സീൽ എല്ലാം ഡാമേജ് ആവും.
@@thundathiltraders Thankas your rpl
UPLOAD DC MOTOR PUMP
Not available right now .Lets see
@@thundathiltraders ok thank you
Submersible reverse കറങ്ങിയത് supply എങ്ങനെ കൊടുത്തപ്പോൾ ആണ്
capacitor red& yellow , Blue neutral , phase in yeloow.
@@thundathiltraders thanksss
Thank you
ഹെഡ് റെയ്ഞ്ചിനേക്കാൾ കൂടുതൽ ഹെഡ് കൊടുത്താൽ എന്ത് സംഭവിക്കും
വെള്ളം പമ്പിൽ നിന്ന് പുറത്തു പോകാതെ . പമ്പിൽ വെള്ളം ചൂടാ
യി സീൽ ഉരുകും
Helo sir,
എനിക്ക് ഒരു സംശയം ഉണ്ട് , എന്റെ വീടിന്റെ കിണർ 30 മീറ്റർ താഴ്ച്ചയുണ്ട് രണ്ട് നില വീടിന്റെ മുകളിലാണ് ടാങ്ക് വച്ചിട്ടുള്ളത് വീട്ടിനും കിണറിനും ഇടയിൽ 10 മീറ്റർ ഗ്യാപ്പും ഉണ്ട് അങ്ങനെയാണെങ്കിൽ ഏത് തരം പമ്പാണ് എനിക്ക് അനുയോജ്യാ മായത് Pls Help me
30 മീറ്റർ ആഴം ഉള്ള കുഴൽ കിണർ ആണോ ? അതോ സാദാ കിണറാണോ ? സൈറ്റ് ഡീറ്റെയിൽസ് whatsapp ചെയ്യാമോ ?
@@thundathiltraders Sorry open well anu
@@thundathiltraders whatsapp number pls
motor revers കറക്കുന്ന video ചെയ്യാമോ
Videoyil undalo.
@@thundathiltraders എവിടെ ലിങ്ക് വിടൂ
@@rameespk4410 Reverse karangunathu videoyil kanamalo ? connection engane anu kodukandenthanu ennathano video edendath?
@@thundathiltraders അതെ കണെക്ഷൻ video ചെയ്യൂ
1 HP മോട്ടർ കണക്റ്റ് ചെയ്യാൻ 2.5 വയറ് വേണോ
ഏതാണ് നല്ലത്
പറഞ്ഞ് തരോ പ്ലീസ്
Etra meter length und?
50-80meters vare 2.5 ok anu.
@@thundathiltraders 15 meter
മുക്കാൽ HP ക്ക് 1.5 വയർ മതിയോ
അതും15 മീറ്ററാണ്
ടെസ്റ്റിനു വേണ്ടി വെള്ളമില്ലാതെ ഇല്ലാതെ ഈ മോട്ടർ ഓടിക്കാൻ പറ്റുമോ?
മോട്ടോറിന്റെ അകത്തു വെള്ളം ഫിൽ ചെയ്യണം .
പമ്പിൽ വെള്ളം ഇല്ലാതെ ചെറിയ സെക്കൻഡുകൾ ഓടിയാൽ പ്രശ്നം ഒന്നും വരില്ല . കൂടുതൽ നേരം ഓടിക്കാതിരിക്കാൻ ശ്രദിക്കുക
Reverse eggany
Reverse ? Connect capacitor in red and yellow , neutral in blue . If you touch phase in red it will run forward , if you touch phase in yellow it will run reverse
@@thundathiltraders 👍❤️
Sir hos pump company
sorry ?
ഹെഡ് എങ്ങനെ മനസ്സിലാക്കാം
Pls refer our old videos
Bro enthaanu ee high head um low head
ua-cam.com/video/040xhNIpzG4/v-deo.html
Endanu reserve ennu parajal
Reverse. Motor opposite directionil rotate cheyum. Connection kodukunathu mari pokumbol anu sambavikaru
എന്താണ് മിനിമം ഹെഡ്
Motor nu kodukkane minimum pressure/load anu minimum head.
Pressure concept ingane allallo
Dayavayi chodyam vishadeekarikamo?
ravesh no idea
Reverse ? Connect capacitor in red and yellow , neutral in blue . If you touch phase in red it will run forward , if you touch phase in yellow it will run reverse
ഒരു 1hp mono block മോട്ടോർ 7.5 to 8.3 A എടുക്കുന്നു. മാക്സിമം ഹെഡ് 15m ആണുള്ളത്.മോട്ടോർ പ്ലേറ്റിൽ 6.2A ആണ് കൊടുത്തിട്ടുള്ളത്.ഈ പ്രശ്നം പരിഹരിക്കാൻ ഇതുപോലെ വാൽവ് കൊടുത്താൽ മതിയോ.ഇങ്ങനെ വാൽവ് കൊടുക്കുന്നതുകൊണ്ടു പമ്പിന്റെ ഡിസ്ചാർജ് കുറയില്ലേ? മോട്ടോർ കേടുവരാൻ സാധ്യതയുണ്ടോ?
ആംപിയർ കുറച്ചു കൂടുതലാണ് . വാൽവ് വച്ച് അഡ്ജസ്റ്റ് ചെയ്തു നോക്കൂ . ഡിസ്ചാർജ് കുറയും അല്ലെങ്കിൽ സൈറ്റ് ഹെഡ് അനുസരിച്ചു വേറെ മോട്ടർ വാങ്ങണം
വാൽവ് കൊടുത്ത് ഡിസ്ചാർജ് കുറഞ്ഞാൽ ടാങ്ക് നിറയാൻ കൂടുതൽ നേരം മോട്ടോർ വർക്ക് ചെയ്യേണ്ടി വരില്ലേ ? അങ്ങിനെ ആകുമ്പോഴും കറണ്ട് കൂടുതൽ ആകില്ലേ ?
@@babuitdo വിഡിയോയിൽ പറഞ്ഞ പോലെ.
തെറ്റായ സെക്ഷൻ ഉള്ള സ്ഥലങ്ങളിൽ ആണ് എങ്ങനെ ചെയ്യുന്നത്. കൃത്യം സൈറ്റ് ഹെഡ് നോക്കി ആണ് മോട്ടോർ വാങ്ങുന്നതെങ്കിൽ ഇതിന്റെ ഒന്നും ആവശ്യം ഇല്ല. അങ്ങനെ ചെയ്യുന്നവർ വളരെ ചുരുക്കം ആണെന് മാത്രം.
Test il reverse koduthu ennu paranjille.. Athu manassilayilla.
Impeller opposite direction rotate cheyyum
@@thundathiltraders Ok. Athu enthu kondanu sambavikkunnathu ennu koodi parayamo?
സാധാരണ ഈ വാല്വിനു പകരം പിവിസി ബെന്ഡുകള് ഉപയോഗിച്ചും ഈ ഹൈഹെഡ് മോട്ടോറിനെ ലോഹെഡ് ആക്കി മാറ്റാന് പറ്റുമല്ലോ ബെന്ഡ് അല്ലേല് എല്ബോ യൂസ് ചെയ്താല് പോരെ
Elbow allenkil bend already oru existing lineil add cheyyunathinu limitation elle. ? Valve anenkil easy anu. Correct selection anenkil ethonum venda.
Enthane e head manasilayilla
ua-cam.com/video/040xhNIpzG4/v-deo.html
Thank you