How To Make An Inside And Outside Corner On A Nasser Two Step Gutter
Вставка
- Опубліковано 26 сер 2024
- How do you make corners on a Nasser Two Step Gutter Profile? Due to ongoing supply chain issues, New Tech Machinery will not be selling the Nasser machine until further notice.
**********************************
Next on our Nasser MultiPro™ Gutter Machine series, Jens from MultiForm Gutters demonstrates how to make inside and outside corners on a Nasser Two Step profile. Stay tuned for upcoming videos in this series where Jens and his team install gutters, including corners, on a house. If by chance we didn't answer your question in this video, you can contact us here: hubs.ly/H0f817Z0
Due to ongoing supply chain issues, New Tech Machinery will not be selling the Nasser machine until further notice.
**********************************
FOLLOW THE NEW TECH MACHINERY TEAM
► / new-tech-machinery
► / ntmmazzella
Visit Our Website: hubs.ly/H0f82Sn0
Subscribe To Our Blog: hubs.ly/H0f82T00
New Tech Machinery provides no warranty (finish, substrate or weather tight) in relation to the metal roofing systems the machines form. Should a warranty be required, users should consult with metal roof manufacturer or coil supplier prior to contracting on work. It is the sole responsibility of the installer and/or metal panel manufacturer to ensure that the roof system meets all engineering and local building codes.
This guy seriously has his setup and practices dialed in, cool to see the craftsmanship
Thanks for share your experience, I am Brazilian and I have lived here in the United States for three years and I work with gutter installations.
That’s video was 💯% on point every step of the way 👍🏼
Thank you bro
very good, I work with gutters in Brazil too good job
I neeed that gutter set up
Thank you for being very detailed. I learned many techniques as if I was sitting in a classroom and not at home.
Thanks, we appreciate that!
Would love to see more of your set up. I love it
It is very good way to do inside/out side corner that way, but brother it kinda old school now . Most people just just strip miter or box miter. I guess whichever way easier for you. Very good setup for gutter machines. I’m impressed 👍
thank you .
now i know how to install corner gutter .. but we don't have a gutter machene here in phillipines ..
but also thank you bro
you give me a idea how to do it .. god bless .. 😁😁
Show me your work bro..
this is a very slow way to join the corners most installers use pre formed strip miters now and dont even know how to cut tabs . flap bender ? they are tongs in the U.S.A.
@@robertsmith-gp6lc but it doesnt looks nice to me that new way
Someday bro.. i will biy for that we need that here in the Philippines
Maaaaan you got the setup!
Where can we get one?
I’m starting this trade next week wish me luck
Good luck
Very professional brother
I want to learn more about your truck layout.
the style of the gutter looks better than o g .
Do you have a video on how to do a miter joint on a 45 deg corner?
Sorry we don't Danny.
@@NewTechMachinery Would not just setting the saw to 22.5 degrees for both the inside and outside corners and following the same steps in bending as with the 90 degree corner....
Saludos amigo y gracias por tus vídeos de cómo mostrar para hacer el
Is the process the same for "K" profile gutter? Thank you. Great video
Hi Pete, yes the procedure is the same for K-style gutters. Thanks for your comments!
@Eddie Saint why would you want to do that? If you dont trust her, mabey she is not the one for you. Why are you wasting her time? Yours also. What you really should do, is got get one of these multi pro machines. Then you'd have zero trouble finding quality gal. Good luck.
oh, nice. No inside flaps, but the bead of caulk holds up ok? That's a lot faster, and clean looking with no screws. I'd like to know how long that lasts without a leak appearing.
outdated method the saw is good but hand cutting tabs too slow.
@@robertsmith-gp6lc it's not that slow, and if it saves from a go back complaint, I'm using at least one tab somewhere
It depends.
I just did a clean and reseal on a house with corners done like this, they had 6 failed corners out of 12.
The gutters were about 20-25 years old.
The corners that failed (3 outside and 3 inside) were all on long runs (one or both sides over 35 ft).
Thermal expansion had seperated the gutter from the sealant on the face seal of the inside corners, so it seems to be a weak point. The outside corners had tears on the backside where the tab had been folded, and had also seperated the sealant from the gutter on 2 of the corners as well.
On most failed corners I've seen, the problem seems to be too much stress on the sealant from the thermal expansion of long runs. Seperation of gutter and sealant (make sure it's clean and dry when you apply!) Or tearing of sealant (screws/rivets in the right place for mechanical support, or maybe add enough sealant that it can stretch. That's a bit of a risk thou.
Slow down when showing pls! Good video
Thanks for the info
Hi Bro, I am roofing contractor here in the Philippines. Hope i can produce that machine.
You can reach us through our website at www.NewTechMachinery.com. Thanks!
Nice and clean looks professional..please always wear gloves...
Great advice Michael! Yes, always wear protective gloves when performing these types of applications.
Where did you get the black shelfs on the left side inside your trailer?
The contractor had them custom-made for his trailer.
What size is your miter saw? What size do you recommend for 5 & 6 gutter? Because using a chop saw saves at least 10 - 15 minutes!!!
The miter saw here is a 14" miter saw and that's what we'd recommend for 5" and 6" Fascia or K-style gutters.
Thanks, that setup is crazy man
How long does it take to cut both corners and get ready for installation?
Excelente trabajo y muy buena idea gracias por compartir
Hi good
How do you install the saw meter?
do you silicone after everything is all installed? so no silicone actually between the joints?
Hello, not sure about the silicone as we're the machine manufacturer and not the installer. May be best to check with your local coil supplier to get their recommendations too. Thanks!
Very interesting.....how much does the complete truck with machine cost ?
The truck was put together by one of our customers, so can't help you with that. You can contact us through our website for more information on our seamless gutter machines at www.NewTechMachinery.com. Thanks!
Hey what material are you useing i didnt no that those saw can cut metal?
Our gutter machines can run painted steel, painted aluminum, or copper. Reach out if you need further assistance at Sales@NewTechMachinery.com thanks!
is the saw blade your using the same blade use for cutting wood ? thanks brother. from cebu phillipines
Oo
What brand and model saw blade do you prefer and how many teeth? Great video!
It is a Makita 14" Miter Saw (model # LS-1440).
@@NewTechMachinery Thank you what saw blade brand and how many teeth on the blade? Thanks.
@@patrickmadrid7594 We recommend the Makita 14" blade part # 792699-2. Any Makita dealer/distributor should be able to assist you with that.
What brand is your flap bend tool?
Drill & rivet.
What size and type of blade do you use for your miter saw?
It is a 14" diameter blade and a Makita LS 1440 saw
@@NewTechMachinery thanks its 96 teeth correct?
@@Voganes Not sure on the number of teeth, but that sounds right.
@@NewTechMachinery thank you very much for your quick response
What saw is that?!
That is a Makita miter saw.
I would be onto my next corner before you had even got your flat benders out
he is doing a video hes probably faster but who cuts tabs anymore?
And your corners will look like garbage!
Most suppliers only carry/stock (K) style mightier straps. The profile in the video is not a (K) style.
Qual tipo de chapa é usado nas calhas ?
Good video but idk about charging 10 bucks for a paper template. I would sooner tell noobs just buy a box miter and pull it apart and there's your template. But hey if you are selling a business course I guess
Hey I do the same what type of machine or saw I should get!!!
Our Nasser Machines utilize a 14" Makita miter saw.
That's a very quiet saw...
How much would it cost to have that piece made and replaced on a corner piece that has been damaged
That varies greatly. Cheapest and easiest solution would be to get a strip or box miter if that'll cover the damage. Otherwise you could make a patch but you'll have a seam, unless you replace the full length of the damaged piece(s).. so anywhere between a few bucks to a few hundred.. if you have a company replace the full pieces that are damaged, could even be over a thousand..
Much better to buy the angle connectors.
Where do you get that saw?
It's a Makita miter saw and only available with our Nasser gutter machine.
How much does just the NTM gutter machine cost new??
Please reach out to us at Sales@NewTechMachinery.com and we can provide you with all the information you need, thanks!
What's the name of the saw you are using and the size of the blade?
It is a Makita miter saw with a 14" blade
Makita LS1440.
14" blade
Silicone? Geocell only.
Step 1 buy premade outside corner lol
what size blade is on that myter saw ?
It is a 14" saw blade
@@NewTechMachinery In backwards I hope with those big teeth.
@@NewTechMachinery is that just a general construction type saw blade?
@@mindinthegutter4097 Yes, this is a general construction type saw blade
What gutter profile is this?
That is our Nasser Multiprofile gutter machine producing the 2 Step Fascia profile with 13-1/2" wide coil (343mm).
If you ever did that here in Boston you’d get laughed at and tossed off the job site. Use the small version of the remade corners. I have no idea why anyone would use your method
Wait, did you mean pre-made corner? What is a remade corner? Not being sarcastic, learning about gutters and I’m curious. Those pre-made corners are ugly IMO. Like the seamless look much better!
Seamless gutters are a thing you know. Lots of people prefer them and this is how you do it without simply adding a corner box on every outside corner on a home. Plus that makes two seams instead of one when you do it this way.
It was great until you got down to the silicone.
No idea what kind of gutter machine that is
It is a Nasser Multi-Profile Fascia style gutter machine. The machine has been discontinued and is no longer available from New Tech Machinery.
Great explanation, that machine is cheating though...
Looks like too much of a pain in the ass to me... Why not just use strip miters ??
There are no strip miters available for the Nasser Profiles, and strip miters are not aesthetically accepted in some areas such as high-end subdivisions.
@@NewTechMachinery ..... That is my point... If I'm in a high-end subdivision that requires me to hand make miters then of course I can allow that in the cost... But I am trying to get work done that makes me money each and every day and I don't have time to spend that much time on one person's house so I avoid the high-end homes
Wacht a pilipino doing gutter, it's better than that man....