They are nice RC but with time they tend to crack at the bottom after several uses at sea with waves smashing on them. The bottom lock pin and the mount for the propeller shaft cracks allowing water to get in of which it is very hard to fix. It will be nice to have a V3 model with those areas reinforced or have the hull with a thicker plastic to last longer. Also it does not get a full 500mt range I have being dropping my baits around 300mt before I lose the range that can also be improved in a new model. Having said that it is a nice piece of equipment :)
I'm in Australia and there is a dealer here going to be selling them for 2k each. I was thinking about buying one instead of a drone for fishing, but reading your comment about the hull starting to crack after only seven uses doesn't leave me with much confidence lol.
hi for 3 months my df 95 v2 worked wonderfully using 4 of the best AA 2400 mah 1.2 V batteries and I was sailing for more than 4 hours consecutively but in the last month I'm having a problem with the servo jitter on the sail winch that I can't solve in any way at first I tried to change from the j4c05 2.4ghz 4ch transmitter & receiver to the flysky fs-i6x but that only changed the behavior of the jitter without solving the problem so I changed the sail winch but it didn't help at all the rudder servo works perfectly so I don't see any reason to change it. correct me if I'm wrong it could be that the receiver I used at the beginning used less volts than the one of the fs-i6x so it must have broken for some reason giving me the servo jitter then replacing it with the receiver of the fs-i6x that perhaps uses more volts gave me a similar problem of servo jitters so maybe it would be useful for problem solving to know how many volts the j4c05 receiver uses and how many volts the receiver of the fs-i6x uses but I don't think this is the problem but I tried almost everything to solve it then I wouldn't like to change the power supply and have to take a 6.6 v battery that however has few mah but if I really have to I will do it. I would be very grateful for the help thank you very much
hey, I have a problem with my Orion 22, 2 green LEDs are flashing on the remote control and the model doesn't respond, it doesn't move, do you know what to do?
They are nice RC but with time they tend to crack at the bottom after several uses at sea with waves smashing on them. The bottom lock pin and the mount for the propeller shaft cracks allowing water to get in of which it is very hard to fix. It will be nice to have a V3 model with those areas reinforced or have the hull with a thicker plastic to last longer. Also it does not get a full 500mt range I have being dropping my baits around 300mt before I lose the range that can also be improved in a new model. Having said that it is a nice piece of equipment :)
I'm in Australia and there is a dealer here going to be selling them for 2k each.
I was thinking about buying one instead of a drone for fishing, but reading your comment about the hull starting to crack after only seven uses doesn't leave me with much confidence lol.
Outstanding, this was the best explanation of how to deal with RC boats. Thank you 😎
Congrats , this was the best explanation how to deal with RC boat .
Thank you for making this video. Very good review of how to use this fishing boat.
WHAT A GREAT BOAT THE BEST.
Like to see a demonstration of the fish finder!
Спасибо, очень полезное видео..
hi for 3 months my df 95 v2 worked wonderfully using 4 of the best AA 2400 mah 1.2 V batteries and I was sailing for more than 4 hours consecutively but in the last month I'm having a problem with the servo jitter on the sail winch that I can't solve in any way at first I tried to change from the j4c05 2.4ghz 4ch transmitter & receiver to the flysky fs-i6x but that only changed the behavior of the jitter without solving the problem so I changed the sail winch but it didn't help at all the rudder servo works perfectly so I don't see any reason to change it. correct me if I'm wrong it could be that the receiver I used at the beginning used less volts than the one of the fs-i6x so it must have broken for some reason giving me the servo jitter then replacing it with the receiver of the fs-i6x that perhaps uses more volts gave me a similar problem of servo jitters so maybe it would be useful for problem solving to know how many volts the j4c05 receiver uses and how many volts the receiver of the fs-i6x uses but I don't think this is the problem but I tried almost everything to solve it then I wouldn't like to change the power supply and have to take a 6.6 v battery that however has few mah but if I really have to I will do it. I would be very grateful for the help thank you very much
hey, I have a problem with my Orion 22, 2 green LEDs are flashing on the remote control and the model doesn't respond, it doesn't move, do you know what to do?
Looks like it uses ardupilot via waypoint mission. Can be home built.
I like the idea. I would like it better if the leader attached to the line was released from the top of the boat.
This is exactly what I need !
email me where you locate, I will instruct you where to buy, thankx
Merci
I am in South Africa where can I buy one
Hello, I live here in USA , Florida. Where can I buy this one . Pls let me know. Thanks
The pricing on all of these fishing drones are just ridiculously over priced. This one is $1200.00 USD.
Where can I get one?
very nice
onde eu compro um desse
Make one suitable for the west coast 🙏
Why is current version not suitable for west coast?
How do i buy this in Australia? Thanks
Good afternoon...where can I buy...im in Jacksonville fl!
Where to get one in nsw?
This is very cool. But it makes no sense that you can't purchase it online.
pls email to joysway@joysway-hobby.com to advise which country you are from, we will advise you the local dealer to supply you.thanks
Link to get
Id like to find out where to buy please. Im based in New Zealand.
Same these look way better than the kontokis ive found a website in NZ that sells them 1500 nzd
@@stefanwaitokia7560 can you share the web site name.
You should send me one to United Kingdom so I can test it!!!
How do I buy one?
are all parts rust resistant?
Hi Joysway.
I just received my RC surf fishing boat.
Upon testing it the hooper door didnt seem to open.
Any advice that you help
Did you get this resolved by chance? Just got one and mine doesn't open either.
It’s illegal to use these in many states in Australia check with local authorities before you purchase it as large fines can apply
Yeah bullshit.
Not true at all
It’s not bullshit at all check with the fisheries department here I australia
@@walpemberton8819 .
Give me 1 example.
What state??
How to bay one ?
would this work for live bait?
I don't see any reason why it wouldn't
how to have it
how to buy. no one has stock ..in USA, or in Middle East
pls leave me your email, I will contact you for the purchase, thanks
Contact me
I am in South Africa where can I buy one
how much $
How much
How much
How much
This is sold for $97 😂
I think 1200
how much are they
About 700 to 800 hundred 😳
@@mryorkie DJI drone is cheaper and faster.
pls email to joysway@joysway-hobby.com to advise which country you are from, we will advise you the local dealer to supply you.thanks
It’s too expensive
I want one for new Zealand please
Doesnt look like Joysway is interested in letting us know where we could get one from.
put a fish finder on it and I'll buy it