@TrioTrioTrio I found out that the Type S boxes you have that Alarms N Stuff said are High Security boxes are apparently made by a company called Bridgend Plastics, according to an alarm installer!
Hi Mr Security, we don't know the code as it's my mum's alarm in her old house and she has passed away and we're selling her home. Do you know the easiest way how to reset it without knowing the code? Thanks.
Hi there, this is the only method I know of that works - remove all power (mains supply and backup battery) then make a wire link and connect it between the ‘Set’ and ‘PA’ Terminals and power up the panel again, then after a few seconds remove the wire link and re connect any existing wiring. The code will now be 0123.
@@mrsecurity ahhhhh well that would make sense! I was wondering why you were posting/replying to comments on yt but not responding to my messages from this morning 😂 I’ll message over insta?
I'm trying to find how to actually set my alarm to day mode. My unit constantly has the power light and the attack light on Red. Nothing I've tried makes it go to the green Day light/mode
@@jonnydaniel195 the Attack light goes on red when a Panic button is pressed in, so check all your panic buttons are reset (by turning the key so the indicator on the panic button is green) if this doesn’t resolve the fault let me know and I’ll suggest some other things to check
Thanks for this the only panic button we have is in our bedroom but never had a key for it. It looks depressed so where is the best place to get a key for it? We haven't really used the alarm since we moved in but trying to understand it for moving forward.
@@jonnydaniel195 you can un screw the panic button cover and push the red button upwards on the inside of the cover and then screw the cover of the panic button back on and this should fix the fault. You can also purchase a key for future on eBay, just search ‘alarm Panic button reset key’ but make sure it’s the right one as some panic buttons have different types of keys, if your Panic button looks similar to the one In the video it should require a similar looking key (they are the standard type)
I hope you can help. This was installed before I bought the flat and have been using it for a few years. When I was leaving the flat the other day I must have hit the wrong number and since then I've been unable to use my alarm. I am unsure if I accidently changed the number by mistake? I've been looking at the manual online and have tryed to reset it but had no luck. Any ideas?
@@mrsecurity I have. Nothing seems to work. I was reading the manual online. The alarm itself is working but I'm not sure what I've did to it. I spent about 30 minutes this morning trying to get it to work. Is there a way to completely reset it to factory setting then put a new code in and go from there?
@@findlay1arches yes there is a way to default it, it’s an engineers trick. Power down the panel, remove the backup battery, Open up the panel, remove any wiring from the PA Terminals, make a wire loop and put one end into the left PA Terminal and put the other end of the loop onto the SET+ terminal at the end of the circuit board. Power up the panel, leave for a few seconds then remove the wire link and replace all wiring back to how it was, now the code should be 0123 and the panel will be factory reset
Nice video, i think the racal guardall pirs you have on your demo go very well with type c alarm boxes and the optima xm is nice aswell
Yeah you gotta have all the classics
@@mrsecurity yup
I think the first XMs were from 1985 or somewhere around then. Awesome
Oh wow! That’s quite old!
Optima xm6 was the first alarm I installed in my firsthouse
moved on a bit now to texecom premier elite 24
Mr security. If ever you are having a sale, please let me know. I would love a old set up like this for the house.
I’ve got a few old alarm parts on eBay right now
How do I find you on eBay Mr Security.
@@christophersnailham8925 ebay.co.uk/usr/discount_alarms_and_security2021
nice
old burglar alarm systems make me go hubba hubba hubba
Great system!
Hello Trio ×3 haven't seen you for a while
@TrioTrioTrio I found out that the Type S boxes you have that Alarms N Stuff said are High Security boxes are apparently made by a company called Bridgend Plastics, according to an alarm installer!
@@alarmmuseum that sounds right! I had a book which said about them, no idea where it is now. But that does sound right
@@MB-alarms_and-more Hey, Been super busy lately so haven't had time to make vids
@@triotriotrio awesome! Glad to finally find out the actual manufacturer!
I want one of these I'm 24 and in Ireland, can someone please guide me to some
1:51 sounds like an Eton zoneguard
I love the set up and the terrible din it makes.
Cool
I have an issue in which you type your code in an it beeps forever never going into alarm mode, any clues? It's this exact panel
Do any of the zone LEDs light up when it is beeping?
@@alarmmuseum no
@@joshb9657 hmm so what you mean is it isn’t setting/arming when you want to leave the house? And it doesn’t stop the exit timer?
@@alarmmuseum yes
Recently had a new battery put init
Hi Mr Security, we don't know the code as it's my mum's alarm in her old house and she has passed away and we're selling her home. Do you know the easiest way how to reset it without knowing the code? Thanks.
Hi there, this is the only method I know of that works - remove all power (mains supply and backup battery) then make a wire link and connect it between the ‘Set’ and ‘PA’ Terminals and power up the panel again, then after a few seconds remove the wire link and re connect any existing wiring. The code will now be 0123.
@@mrsecurity thanks
Even though i dont get messages on the gc anymore I’m still the first ;)
May i quickly say also thank god you put a bell in it and not some crappy siren!
@@thatalarmguy8647 I try make sure all my boxes have bells inside
@@mrsecurity that’s a good thing! (Also has ur discord been broken today?)
@@thatalarmguy8647 I’ve quit discord, just remembered your not in gc so you wouldn’t have found out
@@mrsecurity ahhhhh well that would make sense! I was wondering why you were posting/replying to comments on yt but not responding to my messages from this morning 😂 I’ll message over insta?
8,c8,oc4😅
I'm trying to find how to actually set my alarm to day mode. My unit constantly has the power light and the attack light on Red. Nothing I've tried makes it go to the green Day light/mode
It's almost like the bottom row of buttons don't work but the numbers do when I enter the code after a power cut
@@jonnydaniel195 the Attack light goes on red when a Panic button is pressed in, so check all your panic buttons are reset (by turning the key so the indicator on the panic button is green) if this doesn’t resolve the fault let me know and I’ll suggest some other things to check
Reason why the buttons don’t work is because when it’s in attack mode the panel locks itself down till the fault is cleared
Thanks for this the only panic button we have is in our bedroom but never had a key for it. It looks depressed so where is the best place to get a key for it? We haven't really used the alarm since we moved in but trying to understand it for moving forward.
@@jonnydaniel195 you can un screw the panic button cover and push the red button upwards on the inside of the cover and then screw the cover of the panic button back on and this should fix the fault. You can also purchase a key for future on eBay, just search ‘alarm Panic button reset key’ but make sure it’s the right one as some panic buttons have different types of keys, if your Panic button looks similar to the one In the video it should require a similar looking key (they are the standard type)
I hope you can help. This was installed before I bought the flat and have been using it for a few years. When I was leaving the flat the other day I must have hit the wrong number and since then I've been unable to use my alarm. I am unsure if I accidently changed the number by mistake? I've been looking at the manual online and have tryed to reset it but had no luck. Any ideas?
Have you tried pressing “reset”?
@@mrsecurity I have. Nothing seems to work. I was reading the manual online. The alarm itself is working but I'm not sure what I've did to it. I spent about 30 minutes this morning trying to get it to work. Is there a way to completely reset it to factory setting then put a new code in and go from there?
@@findlay1arches yes there is a way to default it, it’s an engineers trick. Power down the panel, remove the backup battery, Open up the panel, remove any wiring from the PA Terminals, make a wire loop and put one end into the left PA Terminal and put the other end of the loop onto the SET+ terminal at the end of the circuit board. Power up the panel, leave for a few seconds then remove the wire link and replace all wiring back to how it was, now the code should be 0123 and the panel will be factory reset
@@findlay1arches it is the optima XM you have, right?
@@mrsecurity thank you for the advise you given here. I had the very same problem and I was able to reset my house alarm with this info.
What's The Extension Speaker Name?
Don’t know It don’t say
Ah it's ok, I Guess I'll Ask Arga The Wolf
@@SafetyDevice13 whenever I ask people about it I’m always given different answers
@@mrsecurity Ikr I Asked Trio x3 His Version Of It And He Said His Is Made By ADE
Also I Heard In The Video You Said Something Like All star extension speaker