TILES | Modeling in Revit |

Поділитися
Вставка
  • Опубліковано 19 сер 2024

КОМЕНТАРІ • 44

  • @djurovicgiorgio
    @djurovicgiorgio 4 роки тому +1

    Very creative method, thank you! You asked to let you know if we want more interior design videos, yes we do!
    Get well soon.
    Thanks again Niko

  • @anasstawqi4214
    @anasstawqi4214 Рік тому

    It is great tips to do install tile profesionally.

  • @lollipui
    @lollipui 3 роки тому

    This is very benificial for material take off perspective, but probably will be a lot of works for the draftman

    • @NikoG
      @NikoG  3 роки тому

      This way only for interior architects))

  • @waheedarshad0133
    @waheedarshad0133 4 роки тому +1

    What great idea about gap 😃

  • @ubadaashaeib8237
    @ubadaashaeib8237 4 місяці тому

    it is great vid and very helpfull
    you answered all my mind's quastions
    thank you very much

  • @przemysawniedbaa5823
    @przemysawniedbaa5823 3 роки тому +1

    So effective method brother! Thanks

  • @FarhaNzAsyraf
    @FarhaNzAsyraf Рік тому

    This is well explained every details n really helpful. Thank u!

  • @waheedarshad0133
    @waheedarshad0133 4 роки тому +2

    Good one

  • @AlbrechtJ
    @AlbrechtJ 2 роки тому

    Thanks Niko for your good tutorial. Very helpful.

  • @walidhussain7998
    @walidhussain7998 2 роки тому +1

    thanks alotttttttttttt, Perfect ,

  • @sportlol
    @sportlol 3 роки тому +2

    This system is superb for a grid tile system. Is it possible to place the tiles in an uneven way using this system, let's say each row of 60x30 tiles displaced by 1/3rd?

  • @paokpig
    @paokpig 11 місяців тому

    can you do one vid for floor tiles ? i think creating a custom floor with tiles at the last layer would be nice

  • @haydarali8440
    @haydarali8440 3 роки тому +1

    Amazing design...
    Thanks

  • @rrrenzrobert
    @rrrenzrobert 2 роки тому

    Thank you so much! Very nice and clear video!

  • @patrickoconnor3064
    @patrickoconnor3064 2 роки тому +6

    Great tutorial! However I am having a bit of an issue. I am using Revit 2022, maybe they changed something? The problem I am having is that when I open the "Edit Type" there is no "Constraint Parameter" which means there is also no "Offset". Am I just doing something wrong? I do not really see what it could be, but obviously something is going on. Is it possible that I have a setting misconfigured somewhere? Help figuring this out would be greatly appreciated! Thanks!

  • @nihalruwandeniya8255
    @nihalruwandeniya8255 Рік тому

    Thank you. Very helpful

  • @immi85
    @immi85 4 роки тому +1

    Supper Niko.
    Get well soon

  • @ararena4075
    @ararena4075 2 роки тому

    Great Work !!!!

  • @arieshoelace
    @arieshoelace 3 роки тому

    Awesome! Thanks for this video.

  • @SaadFakhoury
    @SaadFakhoury 3 роки тому +1

    Thanks, sir for posting this video
    It is really helpful and beneficial
    30-12-2020

  • @locolegs1000
    @locolegs1000 4 роки тому

    Thanks for a creative solution!
    However it's a lot of steps just for creating tiles.... I will only try it when I have time to burn during the project or required to calculate the quantity.
    I will just put the texture on, then use the real-time rendering software for realistic look if I need to.

  • @Wasim82m
    @Wasim82m 9 місяців тому

    Great One

  • @fyiarch
    @fyiarch 4 роки тому

    Great video, good information

  • @sevdajavandideh519
    @sevdajavandideh519 3 роки тому +2

    thank you. this was very helpful. How do we apply the same thing to the floors?

    • @NikoG
      @NikoG  3 роки тому +3

      you mean tiles? you can use "roof", the Roof also have the curtain syste,. just doit flat

  • @iftekharkhan8879
    @iftekharkhan8879 4 роки тому

    Hi Niko how is Ur health ....I want a video from Ur side about wall location line not basic but some advanced i.e when to Use which location line while creating wall etc ...plz while creating cladding which type of location line used ,lining wall etc plz make a.video as soon as possible thanku very much

  • @Joyboyshorts555
    @Joyboyshorts555 4 роки тому +1

    how to make garden interlock {road please make a toutorial please please please please

  • @ashrafulalam7042
    @ashrafulalam7042 3 роки тому

    Hi Sir,
    It’s good to have you here!! This is nice class but could you make an another video for floor tiles such as wall pls. I tried to do using this method but panel can’t fit to surface of floor !!
    Thanks n regards

    • @arqcarol
      @arqcarol 9 місяців тому

      You can make it with roof and courtain panel.

  • @BobbyZgangialf
    @BobbyZgangialf 3 роки тому

    You can do it also with just 1 CWP 2 materials 2 parameters

  • @I_kiza_real
    @I_kiza_real 3 роки тому +1

    Is it can calculate Quantity volume/area ?

  • @JeffersonSandrin
    @JeffersonSandrin 4 роки тому +3

    How can I make it for floors ?

    • @immi85
      @immi85 4 роки тому +5

      You can use same method with roof glazing for floor tile

  • @sevdajavandideh519
    @sevdajavandideh519 3 роки тому

    Also is there way to change the thickness of the wall?

  • @nuwansilva9131
    @nuwansilva9131 7 місяців тому

    How about the Floor Tile?

    • @ubadaashaeib8237
      @ubadaashaeib8237 4 місяці тому

      it is the same
      you can chose Sloped glazing from roof tab

  • @luisfe7187
    @luisfe7187 4 роки тому

    Nikko la casa pura #9 🙏

  • @denisgeovanda2155
    @denisgeovanda2155 3 роки тому +1

    How to make ceramic tile in flor like tihs video

  • @pankajkhairnar7588
    @pankajkhairnar7588 4 роки тому

    Hello sir...!
    Do we need license to make online revit tutorial on UA-cam ?

  • @Husztiali6999
    @Husztiali6999 3 роки тому

    Niko....where can I find those families ??

  • @mustafasattar6808
    @mustafasattar6808 Рік тому

    thank alot ,, please need help with somethin who can i contact u