How To Remove The Rear Panels On Piaggio Typhoon / Aprilia SRMT Euro 4 Models
Вставка
- Опубліковано 19 сер 2024
- www.scooterstreet.com.au
Hi Guys, We do our best to answer every Question in the comments, help us by liking the video and please show your support SUBSCRIBE, we will reply as soon as we can👍
Due to many requests, here we are! Video tutorial on how to remove the rear panels on the late model Piaggio Typhoon / Aprilia SRMT.
Piaggio over-engineer almost everything! This can be the curse of well built bikes, they are difficult to pull apart.
Hopefully this helps. Have a question? Ask us in the comments. Subscribe to our channel and we'll be happy to help!
I had seen a few comments asking for this. Great work guys 👍
Awesome! Thank you! We appreciate your support of our Channel Paul..
Most useful video of the month. Thanks!!!
Thanks heaps mate😎.
Thank you so much that saved my life!
Haha glad it helped, very time consuming job👍
How the heck do you put back the spark plug inspection panel? I cannot manage to put it back on!
Flex it to fit and slot the bottom in after the seat is opened. Watch around the 1:30 mark.
Top speed of this scooter and list of mods that have been done to it please.
MHR Rep cylinder, Arrow exhaust, Malossi ECU, Jetting, Variator, Kevlar belt, clutch spring Yellow set. GPS at 95kph short road.
I have a piaggio typhoon 50cc 2018
Cool👍
Great video. What order should I put the panels back on?
Watch video in reverse🙃
Yeah thanks. Bit of a silly question to be honest@@scooterstreetau
All good👍@@connorwu1233
What’s the top speed and mods list on the bike please
MHR Rep cylinder, Arrow exhaust, Malossi ECU, Jetting, Variator, Kevlar belt, clutch spring Yellow set. GPS at 95kph short road.
Do you know how to take the back fender off in peugeot speedfight 4?
We have not worked on these. I have looked at some pictures and it requires loosening the air box and remove the fixing bolt behind. At the front of the rear wheel also remove the fixing bolts and then remove the bolts on the exhaust side.
im guessing this works basically the same way for the piaggion tph 2011?
Yes and no, the 2011 is similar but far more simple. Less screws on the 2011 and they're much more accessible. The E4 panels are a labyrinth of screws😂
Can I use she'll helix ultra 5w 40 for my typhoon 125 4t mate
We usually reccommend 15W50 for that bike, due to it being air cooled. The heavier weight will reduce the oil being burned, whereas the lighter weight oil will burn more.
sorry because im late but i have the same scooter piaggio typhoon and my front plastics have broke so if you can please send me a link of where to buy new ones(:
Are you in Australia?
How do I change headlight bulb on 2019 typhoon?
Remove the screws for the front cover. 6 Screws located inside the knee are/ignition side. Pull front cover forward away from the leg shield. You will see the wiring harness connected to the light assembly, twist globe holder and access the globe.
where’s the ecu located to change it on this bike?
Underneath the rear right panel. Both rear panels are attached to each other by internal screws, so they need to be removed together. Watch this video to see all the info. ua-cam.com/video/mp2w05TV3Vg/v-deo.html&ab_channel=ScooterStreet
How do I remove the cvt cover? There are 2 weird bolts on it
These bolts have factory Anti-tamper bolts, start tampering.... cut, chop or grind...
@@scooterstreetau oh okay thanks!
@@scooterstreetau can you do a video on how to remove them?
@@scooterstreetau a pair of mole grips worked great for me 👍🏻
Where can I buy the pipe
www.scooterstreet.com.au 😁
omfg i have to take it ALL OFF. ffs thx for the info tho
Yes, cheers for that one Piaggio engineers😂