Thanks for the video. My 2 cents for anyone else doing this is taking the tires off makes it way easier to get to the bolts. Also to avoid stripping the nuts or snapping the stud spray the bolts with some penetrating oil the night before. I used a dewalt 10mm box wrench that had a more aggressive angle. Flip the wrench around so the tail end of the wrench faces the front of the truck. It's the only way I could get the back bolt on the drivers side. Once the bolts are loose it you can use a long screw driver to ease back the tube. The plates slip in pretty easily. Good Luck!
good stuff!! not sure if mine is different but the correct prong on the relay is the other silver one. if i follow you, it will through a CEL light saying its running to rich.
I found the same thing, couldnt find any voltage on the one in the video or the one shown in the directions, i used the other silver pin and got voltage at startup. I had to install the block off of plates too
Thanks for the video. My 2 cents for anyone else doing this is taking the tires off makes it way easier to get to the bolts. Also to avoid stripping the nuts or snapping the stud spray the bolts with some penetrating oil the night before. I used a dewalt 10mm box wrench that had a more aggressive angle. Flip the wrench around so the tail end of the wrench faces the front of the truck. It's the only way I could get the back bolt on the drivers side. Once the bolts are loose it you can use a long screw driver to ease back the tube. The plates slip in pretty easily. Good Luck!
Finally someone showing the plate install, great video, I feel very confident doing this on my GX watching this. Thanks!
I give this guy a 10/10 on this Instal and Vid. I also give him 100/10 for doing it at night with just a cell phone light🙌🏻
What’s the purpose of the block off plates? What would happen if you don’t installed them?
Where can get the kit from? Great job
good stuff!! not sure if mine is different but the correct prong on the relay is the other silver one. if i follow you, it will through a CEL light saying its running to rich.
I found the same thing, couldnt find any voltage on the one in the video or the one shown in the directions, i used the other silver pin and got voltage at startup. I had to install the block off of plates too
What are the side effects of bypassing it
No chance of your SAIS failing and giving you codes. Also will not let you pass smog in some states if they see it. Otherwise no other side effects