My drawer is assembled but the drawers are uneven and I don’t see any way of adjusting them. Is there a way of adjusting the hinges up or down so they are even? Maybe you can do a video on how to adjust them because I can’t find any on UA-cam.
I did the 4 drawers double (160 x 99), very frustrating product at the end when you try to fit the drawers. The drawers slider seems too complex a design, the catch at back isn’t very secure and similar with the 2 plastic catches underneath the drawers. Also can’t correctly attach/slide the top drawers when the roof part is already on, and if you do the top drawers before the roof then I can’t tighten all the roof screws.
Exactly the same issue I'm having, and it seems like all ikea furniture is now this poorly designed. I am literally never buying another piece of ikea furniture.
@@ivy5554 hey I think I figured it out. It’s hard to explain but the key is the fitting between the plastic clip that u earlier pushed into the bottom of the drawers on both sides, and the metal bit on the outside towards end of each slider. You have to lift that metal but so that the but at 90degrees positions direct into the hole in the plastic clip, and then when that falls in you close the plastic clip by pushing it forward. It’s tricky but if you get this done the joke at the back of drawer will auto fit into the metal hook at other end of slider. This was not explained well in manual.
Yeah, the issue is that I've done all that but for the last drawer the holes that sit on top of the adjustment screw are either miscut, or the holes are not lined up correctly in the back to slot over the hooks. I have all the drawers in except the last one and you can't really see what's happening too well with the top on. I was able to feel back there that the hooks are in the holes in the back, but the drawer hole that sits on the adjustment screw is not lined up and can't slot in to go down and lock the drawer. I also got two replacement drawers and they will not slot together properly at all, theres a big gap in the back piece and the plastic screws wont even go all the way down, so nothing lines up even if I wanted to try a new drawer. 😑 Thanks for responding though! I am so beyond frustrated at this point.
How tall are you and how tall is the dresser? Also, where did you get the mirror from and what is the name of the mirror? Thank You for the video upload.
I’m 5’8”, about 1.74m. That config for the dresser is 1.45m (4’9”). The mirror next to it is the mirror door on my pax wardrobe. Check out that video for more on that.
Hey! Assembling this right now. We notice that there is about a 2 inch gap between when the drawer is pushed in and the back of the dresser. Almost like the draw is an inch or 2 too short and doesn’t reach all the way in the dresser. Just wondering if this is correct and the way it is supposed to be? Drawer fits in, no issues. Just is just seems like the drawer is missing about 2 inches in depth.
Nordli 2 door version slider does not attach to bottom of drawer Just falls off No Clicks as described in manual. Metal spike at the rear falls out and nowhere to screw door frame to metal slider. White plastic lug on top of side panel does nothing Terrible design.. I thought IKEA was a smart brand but this rubbish
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Brilliant video saved me a lot of hassle following your steps ❤
Glad it helped
Hi! Is it normal that we see the silver rod across the top drawer? My ocd cant handle it 😊
My drawer is assembled but the drawers are uneven and I don’t see any way of adjusting them. Is there a way of adjusting the hinges up or down so they are even? Maybe you can do a video on how to adjust them because I can’t find any on UA-cam.
Got the same problem a bit. Its completly in but 1 of 4 is not lined up nicely
I did the 4 drawers double (160 x 99), very frustrating product at the end when you try to fit the drawers. The drawers slider seems too complex a design, the catch at back isn’t very secure and similar with the 2 plastic catches underneath the drawers. Also can’t correctly attach/slide the top drawers when the roof part is already on, and if you do the top drawers before the roof then I can’t tighten all the roof screws.
Exactly the same issue I'm having, and it seems like all ikea furniture is now this poorly designed. I am literally never buying another piece of ikea furniture.
@@ivy5554 hey I think I figured it out. It’s hard to explain but the key is the fitting between the plastic clip that u earlier pushed into the bottom of the drawers on both sides, and the metal bit on the outside towards end of each slider. You have to lift that metal but so that the but at 90degrees positions direct into the hole in the plastic clip, and then when that falls in you close the plastic clip by pushing it forward. It’s tricky but if you get this done the joke at the back of drawer will auto fit into the metal hook at other end of slider. This was not explained well in manual.
@@ivy5554 and you have to attach the roof and secure it with the screws b4 u put in the 2 top drawers.
Yeah, the issue is that I've done all that but for the last drawer the holes that sit on top of the adjustment screw are either miscut, or the holes are not lined up correctly in the back to slot over the hooks. I have all the drawers in except the last one and you can't really see what's happening too well with the top on. I was able to feel back there that the hooks are in the holes in the back, but the drawer hole that sits on the adjustment screw is not lined up and can't slot in to go down and lock the drawer.
I also got two replacement drawers and they will not slot together properly at all, theres a big gap in the back piece and the plastic screws wont even go all the way down, so nothing lines up even if I wanted to try a new drawer. 😑 Thanks for responding though! I am so beyond frustrated at this point.
Does it open and close nicely?
Thank you so much that helped a lot with mine!
How tall are you and how tall is the dresser? Also, where did you get the mirror from and what is the name of the mirror? Thank You for the video upload.
I’m 5’8”, about 1.74m. That config for the dresser is 1.45m (4’9”).
The mirror next to it is the mirror door on my pax wardrobe. Check out that video for more on that.
Hey ! I would like to know if Nordli furniture can support heavy things like books, filled workbooks etc ?
Yes, should be pretty sturdy, we put some boxes and other furniture on it.
great get to look at the back of you for most of the assembly !
Hey! Assembling this right now. We notice that there is about a 2 inch gap between when the drawer is pushed in and the back of the dresser. Almost like the draw is an inch or 2 too short and doesn’t reach all the way in the dresser. Just wondering if this is correct and the way it is supposed to be? Drawer fits in, no issues. Just is just seems like the drawer is missing about 2 inches in depth.
I'm not in town at the moment so I can't check on mine, but I'm assuming that must be the way they made it...
Nordli 2 door version slider does not attach to bottom of drawer Just falls off No Clicks as described in manual. Metal spike at the rear falls out and nowhere to screw door frame to metal slider. White plastic lug on top of side panel does nothing Terrible design.. I thought IKEA was a smart brand but this rubbish