What he did in Chris Browns album Heartbreak on a Full Moon is crazy. All 44 tracks mixed to perfection. These are Chris‘ best songs to me. It feels like you’re inside his vocals
Nah bro he is my favorite mixing engineer and for the last couple months I've been incrementally adjusting my template to his from what i can see in the MWTM subscription. You just gave me everything I need so your taking my money!!! Thank you so much!!
One thing I’m not sure was covered is his PT heat settings. All tracks are on “pre mode”, Drive 10:00, Tone 3:00. I have the screenshot if you’d like it! U a legend for this video!
If no one noticed Jaycen Joshua implements a method of top down mixing while setting up his buses depending on the frequency of the instrument/ multiple independent instrument frequencies to then send them all to a Sum Bus. Such an advanced way of mixing but your processing so much less. Less is more how he would say 😊
Hey man, Good job. Ive found couple of things that you might look at it: 1- your drum buss, Its first Rbass and then Shadowhills. 2-you missing the transformer 2 AUX( so important) 3-Rcomp from waves he uses almost always on his kicks for more punch ( between -6 to -8 reduction) and most importantly IMO, its really important that to watch him how much he drives what plugins. otherwise you dont get the best out of that his chains. Good luch guys!
Can we discuss plug-in alternatives? If you don’t already have many of the plugins in this template, you’re going to be spending a rack in order to bring it to life. I’ll start. The $24 Klanghelm MJUC is reportedly in a blind test, extremely difficult to distinguish from the El Ray. There’s also a free version.
Thanks for that ! Question, in terms of drums, the only tracks that are paralleled compressed are the C Drums tracks , right ? All percs, toms, HiHats etc.. Are routed to the ALL DRUMS without compression correct?
would you mind making a video showing the plugins and the settings for the efxs. i have a lot of the plugins but i use Studio One and i downloaded pro tools but a lot of the plugins i dont have them downloaded to AAX.. and if i download them to AAX they are just going to take space in my computer since i use studio one with vst3.. :(
Question for ya as im in Ableton and not pro tools. Which comes first in the chain, the c-drums with the R-bass and shadowhills, or the bus with all of the NSLs? I assume he's driving in through the NSLs first, then routing the kick, snare and 808 to its own bus? Does anyone know how I could set something up similar in Ableton?
Master, hello. I'm a mixing engineer modeled after Jeycen Joshua. I have a short question. Almost all engineers except Joshua do not use 'mono' bus channel. There are 2 bus channel samples in the template, one of them has a 'mono' bus channel. Can you please tell me what this is for? Please.
My question has always been whether the C DRUMS and the C DRUMS M, how they are routed. and if in the C DRUMS all the plugins must be compensated to the same volume that we had in the input? 🎶
I could be wrong, but i'm pretty sure the C DRUMS M is where the individual drum elements get routed to (think of it like a summing mixer), then C DRUMS M gets routed out to C DRUMS
This is so good, thank you SO much. Nevertheless, can someone explain why there would be a soothe taking of all the low end on the Bass track? It doesn't appear to be sidechained to anything, it just doesn't make sense to me. If someone can explain that'd be great! 😅 Still, amazing video.
also you uploaded the wrong template. The drum bus has "NLS Channels" instead of NLS Busses and there's no other busses included besides the C drums and Drum master.
Can someone expalin the reason for summing everything to a "C Drum M and the a C Drun aux" and wherher that would cause processing issues like artifacts?
Hi - Thank you for this! Do you know the presets for the LexHall and C Chamber auxes? If so, could pleassee share? I have a newer version of Lexicon plugins so it doesn't load. 🙏🙏🙏
i dont get this template, where to i place my bass for example? ir wont let me put it in the bass track? do i just create my own and send it to that? someone pls help
Mix with the Masters just posted a new vid of him today. He personally explains most of this along with his reasoning. I believe 808s are sent to an aux he calls “The Boom”.
Peace bro first of all thank you for contributing for the culture! All these pro engineers including Seth talk about the CL1B and how it is a game changer, do you know how much db of compression they use outside of the box?
Quick question! In tracks where there are two identical channels like in Drum n Bass or C drums but they are separate tracks, how do you route audio to them at the same time?
AMAZING VIDEO! I have a question. He sends his drums and bass on two separate busses that both contain the 8 instances of nls buss? Why doesn't he send bass and drums to just one buss with that treatment?
good morning and thank you fam, question i see he has master tracks for all his aux tracks what is the purpose of this, please elaborate, causeive been trying to figure this out for some time now
i got a question the c drums buss where is the Rbass and shadow hills are, goes root it to the C drums M where the nsl consoles are? and then the C drums M goes root it to the drum and bass buss?
For anybody that was able to open the template, are you able to post the settings of the efx so that those of us that can't open the template (ie. I use Studio One) can mess around with some of these chains to see what works for us?
I have your template but dont have pro Q 1 or 2, just 3. What are the eq settings for the vocal effects like the vocal exciter and harmonnix? Thank you
cool but remmebr yall. Its not the template its the brain that made it. No matter hat he knows so much of the micros involved with mixing he can flip it and change up to his liking.
This is equivalent to reading instruction on how to build a car in mandarin. The language doesn’t register. This intimidates me about engineering😂. I feel like there is no short cut: this takes YEARS. Period.
If it helps, I felt the EXACT same way as I was just getting started. Eventually, if you’re staying consistent, you start to piece things together and realize that you’re doing better than you think you are 😎 - Jordan
I would be willing to do a discord live stream to help the process. Things I wish I knew in the beginning, instead of all these tips and tricks. Heck I would even mix and pre master someone’s track on here. I think that would be fun if you guys are up for it
Put it this way, if i ever just magically frogot all of the things i learned and thru all the struggle, frustration and sleepless nights i went trough trying to learn engineering on my own and was somehow back at the beginning, i'd say FUCK NO, and find a different, easier thing to do and learn, and thats coming from a person who LOVES. I REPEAT. LOVES THIS SHIT.
so basically this template is based on what? You said you had contact with one of his assistants and also watched his videos. So it's based on those 2 things?
@@MyAudioAcademy The Main Music bus is missing several plug-ins that Jaycen use. A bitcrusher, Little Radiator, An EQ, CLA Mixdown, RC-20 Retro Color, and bx-digital. Also, your Keys All, GTR ALL, etc., are routed to All Music instead of Main Music.
@@fredbeckofficial If you're referencing the 2020 MWTM series, you'd be correct. In his most recent process, many of these plugin's were either removed or made inactive.
Could you tell me how the drums are routed? I use a different DAW so it's a bit unclear. Are the individual drum tracks routed to C DRUMS, wich is a GROUP track? And then that goes to C DRUMS M wich is also a GROUP track? And this goes to ALL DRUMS? Im not sure wether the c drums are an aux tracks he blends in with the drums or if its a straight in- and output for the drums? Thanks
Group the kick and snare and add the nls, then group that group and add the drum bus presets, this is c drums. Then group the percs. Jaycen has a low perc group and hi percs. Then group all of those and call it "All Drums" So only the kick and snare go trough the nls and drumbus processing.@@zwiemenoe
After this group your 808s run them trough the nls, then group that and add the bas bus preset which is slightly different from the drum bus preset. (theres videos on this aswell" call that "the boom c". Then do the same if you have other basses in the track so every lowend instrument get their own nls buss. After that group all the boom c and bass c to All Bass Bus. Group all the C busses together if you want to add the Kick N Bass group which Jaycen then adds the standardclip vst on and clip them slightly together for extra loudness@@zwiemenoe
when u mix a vocal sesh would u record your vocals with all ur plugins and w.e using a Vox temp and then print it and then take that print and put it in a mixing temp?..do u put the mix plugins like over there recorded print or just take the original recording and start all over in a mix temp with a dry Vox and then just use the mix plugins ? I hope tht makes sense ..appreciate any help
Always start with the headphones that you have. There’s a Grammy award winning mixing engineers that’s using relatively cheap headphones, but they learned them. But, if we had to choose, we are Sennheiser fans!
🤔 Question: What's your TOP 3 Jaycen Joshua Mixes?
Russ' Shake The Snowglobe whole album! 💎👍🏼✌🏼🔥
usher Confessions Sonically the most balanced translatable mixes. the low end, mids, and air are insane
What he did in Chris Browns album Heartbreak on a Full Moon is crazy. All 44 tracks mixed to perfection. These are Chris‘ best songs to me. It feels like you’re inside his vocals
Malamente
I can’t choose he’s done MOST of my fav mixes
Nah bro he is my favorite mixing engineer and for the last couple months I've been incrementally adjusting my template to his from what i can see in the MWTM subscription. You just gave me everything I need so your taking my money!!! Thank you so much!!
Look up the article on illangelo's vocal chain for the weeknd. That dude can mix! He as a tutorial on how he mixed "Alone Again".
I need that template in Logic Pro and fl studio
One thing I’m not sure was covered is his PT heat settings. All tracks are on “pre mode”, Drive 10:00, Tone 3:00. I have the screenshot if you’d like it! U a legend for this video!
Totally bruv😭🔥
👀
yoooo where'd u get that info??
@@blashuvec I took a screenshot when he mixed live on IG. He briefly switched into mixer view when he was about to start on the vocals
Would love the screenshot of this!!!
You're a legend for this bro ain't no way I'm downloading this for free, I'm buying it right now🔥
Llay! My guy 🙏
We appreciate the support. Keep us in the loop on how it works for you!
Bro I also can't 😂😭
Bro the vids never pop up and you dont link to the other vids you say you're going to do in the video. Much love, you're a goat.
If no one noticed Jaycen Joshua implements a method of top down mixing while setting up his buses depending on the frequency of the instrument/ multiple independent instrument frequencies to then send them all to a Sum Bus. Such an advanced way of mixing but your processing so much less.
Less is more how he would say 😊
Great vid, can u link the video of Joshua explaining this, peace
bro swear down imma need a reaction of Jason to this... hahahahha this is unbelievably amazing
^^^ Someone make this happen! 😂
Fire. Binging all of your videos now
Let’s go! Appreciate you tapping in Tay 😎
Great work on this!
Where did you get the evidence for the Subwoofer & Lo AIR settings? he has never shown these as far as I'm aware?
His template is available to Mix With The Masters members, if I'm not mistaken. He's shown an awful lot of it on there.
LET'S GOOOOO! 🔥
Hey man, Good job.
Ive found couple of things that you might look at it:
1- your drum buss, Its first Rbass and then Shadowhills.
2-you missing the transformer 2 AUX( so important)
3-Rcomp from waves he uses almost always on his kicks for more punch ( between -6 to -8 reduction)
and most importantly IMO, its really important that to watch him how much he drives what plugins. otherwise you dont get the best out of that his chains.
Good luch guys!
Can we discuss plug-in alternatives? If you don’t already have many of the plugins in this template, you’re going to be spending a rack in order to bring it to life. I’ll start. The $24 Klanghelm MJUC is reportedly in a blind test, extremely difficult to distinguish from the El Ray. There’s also a free version.
do you have a studio one version?
Great video, thx🔥🔥 I would have loved to see the Neutron on the kick in action, how much reduction and so forth 6:57
Thanks for that ! Question, in terms of drums, the only tracks that are paralleled compressed are the C Drums tracks , right ? All percs, toms, HiHats etc.. Are routed to the ALL DRUMS without compression correct?
yes
Podrías hacer un tutorial de ¿cómo usarla? por favor!
In the template is the Effect Bus called “Hot Smudge”? I would like to know your configuration, thanks great content 🔥🦾
I think Hot Smudge is Fabfilter Saturn there is a Satuaration called Smudge, to coincidental for me
@MyAudioAcademy where is the link in the description on how he sidechain the keys and music to the kick?
6:48 what Neutron preset is on the the kick though?
Love this stuff... Thank you.
Any chance in the future you are gonna have it for Logic Pro x ?
Carlos lares un youtube
would you mind making a video showing the plugins and the settings for the efxs. i have a lot of the plugins but i use Studio One and i downloaded pro tools but a lot of the plugins i dont have them downloaded to AAX.. and if i download them to AAX they are just going to take space in my computer since i use studio one with vst3.. :(
can we talk about his Shadow Hills comp Demo being Expirend? 😅😅😅😅😅 re you using thi?
cual es el canal para grabar las voces
We need a Studio One version!
these templates in Ableton should be put in return tracks, right? :)
i wish you made this for logic i love protools more but all my cracked plugins only work in logic lmfaooo
Does anyone have the configuration of AIR ENSEMBLE on Air France and LD 1/4?
This is pure gold
is this just for pro tools or is there one for logic pro?
one is needed for logic pro!
Make a Studio one version i'd Pay for it 🙏
Question for ya as im in Ableton and not pro tools. Which comes first in the chain, the c-drums with the R-bass and shadowhills, or the bus with all of the NSLs? I assume he's driving in through the NSLs first, then routing the kick, snare and 808 to its own bus? Does anyone know how I could set something up similar in Ableton?
they are parallel
Is there a complete list of plugins used for this template, or a quick way to find a list of inactive plugins if we don't have the license for them?
Lol that "be my dawg❤" part 😂😂😂
Master, hello. I'm a mixing engineer modeled after Jeycen Joshua. I have a short question. Almost all engineers except Joshua do not use 'mono' bus channel. There are 2 bus channel samples in the template, one of them has a 'mono' bus channel. Can you please tell me what this is for? Please.
My question has always been whether the C DRUMS and the C DRUMS M, how they are routed. and if in the C DRUMS all the plugins must be compensated to the same volume that we had in the input? 🎶
I could be wrong, but i'm pretty sure the C DRUMS M is where the individual drum elements get routed to (think of it like a summing mixer), then C DRUMS M gets routed out to C DRUMS
Any Logic Pro templates? Thanks
Hey cab you do this for Studio one?
what would he out in the main music? what deos it mean by main music
Instruments
This is so good, thank you SO much. Nevertheless, can someone explain why there would be a soothe taking of all the low end on the Bass track? It doesn't appear to be sidechained to anything, it just doesn't make sense to me. If someone can explain that'd be great! 😅 Still, amazing video.
Sidechained to the kick
thanks so much for the video and template! am I missing the links in your description to the videos you referenced?
make s1 version please
Good day. I paid for the Templet and it doesn't open - please advise
also you uploaded the wrong template. The drum bus has "NLS Channels" instead of NLS Busses and there's no other busses included besides the C drums and Drum master.
Good catch! We’ll have that updated shortly.
Thanks for the heads up 🤜🤛
🔗Updated Link myaudioacademy.sellfy.store/p/jaycen-joshua-mixing-template/
Can someone expalin the reason for summing everything to a "C Drum M and the a C Drun aux" and wherher that would cause processing issues like artifacts?
Hi - Thank you for this! Do you know the presets for the LexHall and C Chamber auxes? If so, could pleassee share? I have a newer version of Lexicon plugins so it doesn't load. 🙏🙏🙏
Can we get this for Ableton??
Bro
i dont get this template, where to i place my bass for example? ir wont let me put it in the bass track? do i just create my own and send it to that? someone pls help
Great VID and template!- could you do a video showing how to import stems into it and apply it?
I'm crying😭big love bro
Yoooo 🤣 Thanks for the love!
Hello. The drums are missing the snare, overhead toms. you have those audio channels. and the other audio tracks. Thank you
Do you have the preset for fl studios ?
Mix with the Masters just posted a new vid of him today. He personally explains most of this along with his reasoning. I believe 808s are sent to an aux he calls “The Boom”.
Can you make a template for Studio One?
Do you have one for logic??
How to set this up for FL Studio?
Hey, as I understand Master Faders remove plugin delay compensation issues?
Peace bro first of all thank you for contributing for the culture! All these pro engineers including Seth talk about the CL1B and how it is a game changer, do you know how much db of compression they use outside of the box?
CAN U MAKE A MIX WITH THE TEMPLATE
Quick question! In tracks where there are two identical channels like in Drum n Bass or C drums but they are separate tracks, how do you route audio to them at the same time?
FYI: Didn't see the links in description to referenced videos.
@myaudioacademy can we get this translated to ableton?
Can you make a Logic Pro template?
AMAZING VIDEO! I have a question. He sends his drums and bass on two separate busses that both contain the 8 instances of nls buss? Why doesn't he send bass and drums to just one buss with that treatment?
Subbed in bro, thanks 4 templte 🔥🔥🔥
Is there’s a way to have it for studio one?
I do not see any links for Jaycen's video !?
A day after uploading, the referenced videos were taken down due to copyright issues 😅
do synth bass tracks go to ALL BASS or ALL SYNTHS
also claps to C DRUMS or HI PERCS?
sorry if i missed it in the video
why does he have a lead all bus if he has an all vox bus as well? what does that do. more control?
good morning and thank you fam, question i see he has master tracks for all his aux tracks what is the purpose of this, please elaborate, causeive been trying to figure this out for some time now
same question here!
Anyone build this ableton yet?
i got a question
the c drums buss where is the Rbass and shadow hills are, goes root it to the C drums M where the nsl consoles are?
and then the C drums M goes root it to the drum and bass buss?
For anybody that was able to open the template, are you able to post the settings of the efx so that those of us that can't open the template (ie. I use Studio One) can mess around with some of these chains to see what works for us?
cambiate a pro tools
great info... thank you! :) helps alot with organization..
I have your template but dont have pro Q 1 or 2, just 3. What are the eq settings for the vocal effects like the vocal exciter and harmonnix? Thank you
Does anybody have a ableton/fl variant for this one ?
Omg jaycens vox dynamic eqs are pretty much exactly like mine.
💪🏾 I shouted you out in my future template video
Yesssir! We appreciate the support.
It sounded like you put it to good use too 🔥
@@MyAudioAcademy y’all definitely clutch 🙏🏾🙏🏾
Great, thank you man! Please make a template for Logic Pro and charge it, this is a serious job.
Unfortunately we're only running Pro Tools.
Any of our Logic people willing to help? 😅
did you ever get hold of a logic template??
@@reececrawford i did it my own
@@gersonfernandez5879 any chance of you sharing please?
I’m long time Logic Pro user, I might do it but don‘t have Pro Tools to copy all the settings manually from one daw to another
so do you drag all of the multitracks at the bottom of the mix template and then assign them to these groups? thanks
cool but remmebr yall. Its not the template its the brain that made it. No matter hat he knows so much of the micros involved with mixing he can flip it and change up to his liking.
Don't you have a Studio one mix templet
My only question is what track to we record on? I know where the vocals go.. but which one is my main recording track?
This would be specifically for mixing. I’m not sure that you could record with some of these plugins engaged 😅
Latency would be pretty bad.
@@MyAudioAcademyohh ok. That makes sense lol I appreciate the info that’s why I didn’t mind paying for the template 😌👌🏽
This is equivalent to reading instruction on how to build a car in mandarin. The language doesn’t register. This intimidates me about engineering😂. I feel like there is no short cut: this takes YEARS. Period.
If it helps, I felt the EXACT same way as I was just getting started. Eventually, if you’re staying consistent, you start to piece things together and realize that you’re doing better than you think you are 😎 - Jordan
Haha we all felt that way, producing is a maze sometimes with breakthroughs waiting around every corner
@@bigboss-qv7pe 🎯🎯🎯!
I would be willing to do a discord live stream to help the process. Things I wish I knew in the beginning, instead of all these tips and tricks. Heck I would even mix and pre master someone’s track on here.
I think that would be fun if you guys are up for it
Put it this way, if i ever just magically frogot all of the things i learned and thru all the struggle, frustration and sleepless nights i went trough trying to learn engineering on my own and was somehow back at the beginning, i'd say FUCK NO, and find a different, easier thing to do and learn, and thats coming from a person who LOVES. I REPEAT. LOVES THIS SHIT.
so basically this template is based on what? You said you had contact with one of his assistants and also watched his videos. So it's based on those 2 things?
Thanks for the great template!
Does anyone know the settings of the AIR REVERB plugin in 1/4 DLY track?
guys beware your email might get compromised , my discord got hacked after downloading the template
What are the parameters for the Neutron kick?
Hey I love this video and want the template but we have problems making international payments from my country.
Hey Emmanuel, just type $0.00 for the amount you'd like to pay and you can download for free 😎
@@MyAudioAcademy I am very thankful. Thanks again.
@@proaudionajia Absolutely! Enjoy 🎛
Is it a recreation of yours? Or is it literally the template for him? thanks for sharing! Amazing ✨♠️
It’s similar to his exact template
It's a recreation of Jaycen's actual Mixing Template 😎
@@MyAudioAcademy The Main Music bus is missing several plug-ins that Jaycen use. A bitcrusher, Little Radiator, An EQ, CLA Mixdown, RC-20 Retro Color, and bx-digital. Also, your Keys All, GTR ALL, etc., are routed to All Music instead of Main Music.
@@fredbeckofficial If you're referencing the 2020 MWTM series, you'd be correct. In his most recent process, many of these plugin's were either removed or made inactive.
how would i do the master fader like 'bass all m/c drums m' on fl studios?
Great! Thanks a lot!
Bro can you do a video recording with this
the preset on the bass bus shmc is wrong his not using compression on that one at all just the transformers.
and he hits the shmc on the drum bus at 1dB
Could you tell me how the drums are routed? I use a different DAW so it's a bit unclear. Are the individual drum tracks routed to C DRUMS, wich is a GROUP track? And then that goes to C DRUMS M wich is also a GROUP track? And this goes to ALL DRUMS? Im not sure wether the c drums are an aux tracks he blends in with the drums or if its a straight in- and output for the drums? Thanks
Group the kick and snare and add the nls, then group that group and add the drum bus presets, this is c drums. Then group the percs. Jaycen has a low perc group and hi percs. Then group all of those and call it "All Drums" So only the kick and snare go trough the nls and drumbus processing.@@zwiemenoe
After this group your 808s run them trough the nls, then group that and add the bas bus preset which is slightly different from the drum bus preset. (theres videos on this aswell" call that "the boom c". Then do the same if you have other basses in the track so every lowend instrument get their own nls buss. After that group all the boom c and bass c to All Bass Bus. Group all the C busses together if you want to add the Kick N Bass group which Jaycen then adds the standardclip vst on and clip them slightly together for extra loudness@@zwiemenoe
when u mix a vocal sesh would u record your vocals with all ur plugins and w.e using a Vox temp and then print it and then take that print and put it in a mixing temp?..do u put the mix plugins like over there recorded print or just take the original recording and start all over in a mix temp with a dry Vox and then just use the mix plugins ? I hope tht makes sense ..appreciate any help
What's the difference between 'All Drums' and 'All Drums M' ?
Hey bro, I paid for the mix template but it won’t open . Love the channel
Hey B Tunes! Thanks for the support my man 😎
Can you send us an email with more details here, info@myaudioacademy.com?
What headphones would you recommend for mixing vocals and beat?
Always start with the headphones that you have.
There’s a Grammy award winning mixing engineers that’s using relatively cheap headphones, but they learned them.
But, if we had to choose, we are Sennheiser fans!
DT 770 80 Ohm