The only thing i don't like is that when they put the primer, sealer, wood stain, lacquer, it kills the tone of the wood. For best performance of a guitar, just add paint and add some rubbing compound to make it shine.
@JTNickelz I happen to be the proud owner of an Ibanez Ventura electric/acoustic with a bottom cutaway and it is one of the best guitars I've ever owned. I have an Epiphone Les Paul and currently have my eye on 3 Gibson Les Pauls. I have and probably never will modify them other than a string change or a good disassemble-clean-reassemble. I hope that you can understand.
It's a Godin Pay attention. It shows them putting on the logo, and it goes on the body, not headstock. Gibson puts it on the headstock, like most companies.
i have a Godin Freeway Classic and a Seagull M-6 cedar acoustic...they are high-quality, great-sounding, affordable guitars...my Freeway classic has a Start sound for about 400 bucks!
The terms "fretboard" and "fingerboard" are interchangeable, with the latter actually being the more technical term. Fingerboard is more appropriate in some respects as it the term of choice by most, if not all, major guitar manufacturers. Also, there are fretless basses and guitars. Though fretless guitars are considerably less common than fretless basses, they have been utilized by the likes of Steve Vai, Frank Zappa, and Pat Methany to name a few.
Anything you do to a guitar will have an effect on its sound, wood included. It's just that the tonal difference in wood on a solid body electric is very minimal compared to the electronics.
emgs sound great. its not the pickups that ibanez is getting wrong. but what range? high end ibanez are very nice. but they equate to a mid range schecter. also, back in the 80s, other great brands we know today didnt have a standing at the time. gibson was the safe way to go. but put humbuckers in a fender and it sounds almost the same through the same amp. which was always marshall. lastly, what do you consider flashy? to me that would be a dean razorback or a bc rich warlock
@MrOzMendez No, I'm saying that part 1 of a video is just part 1. You said only part of a guitar is being made, but that's because the video isn't exactly finished, as obviously stated by the terms "Part 1" and "Part 2." Your criticism is faulty.
I pluck the string, the string will make the body (and neck) vibrate. The body will enhance certain frequencies - or mute some, depends how you see it - and with its own vibration "feedback" on the string so it may or may not ring for longer (depending on original frequency of the played string(s) and what kind of "EQ" the wood provides). The pickup picks up what is left. It's all instant, but this is how I believe it works. Next up^^^
If you play unplugged on your electric guitar, and gently touch the headstock against a table, wall, or something that will resonate you will hear a distinct difference in tone. Louder and very often nasal (maybe it's all the IKEA furniture...)
i work at a shipping dock here in northern Ga Close to Tennessee where gibson ships from. I constantly load GIBSON USA guitars daily to and from China and Nashville. They are ASSEMBLED in china. Materials from the USA. And first of all, Ibanez is known for using MANY DIFFERENT BRIDGES. That includes floyd rose, licensed floyd rose, hardtail, etc. When was the last time you saw a gibson with a floyd rose? never. Many of Ibanez Bridges are considered equal to FRs. Gibsons were great 30 years ago.
hey does anyone know where to get 2 part acrylic lacquer. I can find poly, and nitrocellulose but there is an acrylic finish that dries in 2 hours and i can't seem to find it. by the way that blue guitar in the beginning of the clip has no finger inlays except one.
Oh, and i'm totally going to be biased, i swear by ibanez, but gibson is pretty damn boss too. If i had to record any sort of rhythm stuff, give me a chunky ol' les paul, but otherwise i'll stick to a prestige neck.
@metachozoite Also, try playing two different guitars. One by the First Act brand. One by Fender. You'll notice on the First Act that the intonation is impossible to fix due to poor measurement and anything above the 6th fret will sound flat and out of tune. You'll notice that the tuning pegs spin on their own. You'll notice that it just sounds ugly. On the Fender, depending on the model, the the only problem you might have is intonation and that can be fixed in a matter of minutes.
Got a first act acoustic guitar I got when I was four or five it’s got a low e string a g string and a b string hence its name “toothless” it is my absolute favorite guitar to tap on
I posted the vid to my band to show what the cables look like going into a Godin guitar. It's kinda like an umbilical cord than just your normal cable.
That's great but Ibanaz is used for metal music I would say and that great to have a guitar for every style, but it's better to have a instrument made for one type of music that the user can play, that's just my opinion, cause two of my favorite metal guitarist use Ibanaz and I think it sounds really great.
Why do they take a board that is the width of a guitar already, cut it, then dry it, then glue it, then dry it again? Why not just use a solid peice of wood? Not only would it be stronger and glueless, but it would eleminate an extra two months of dry time. They all do it, so there must be a good reason. Does anyone know it?
In the 20s electric guitars were just acoustics with pickups out in, then up until 1932 they were archtop hollowbodies with pickups, and by 1932 the telecaster was released, quickly followed by the les Paul, both of which were fully solid
@metachozoite I understand where you're going with this, but you're not entirely correct. Some guitars are absolutely brilliant - high end pickups, resilient wood, flawless neck shape, etc. You also have to know how to maintain its value and how well it can be played. A buzzing string isn't always the guitarist's fault. It can be a manufacturing error (uneven fretting, faulty bridge, etc). While it's true that you need to play well to sound good, you also need to have a feasible instrument.
This topic deserves to be made again. The quality of the video is terrible by modern standards. And I think the process has also changed since even cheap guitars are now pretty good as well.
@Shrieken213 False as shit. You can do anything with any guitar, doesn't matter what it is. As for sounding better? Depends on the hardware/wood the guitar is made with. Gibsons are generally made of mahogany (les paul, flying v, explorer, etc etc) which have good resonance, no doubt, but shit, they are a bit overpriced as balls. I'll stick to a Ibanez RG with some bare knuckle pickups.
all i hear is computer guided machine. gibson goes old fashion, one person cuts the neck and doesnt need refrences. thats why gibson is better it has more of a warm sound
No, it does not. You think all the guitar manufacturers are going to do something that adversely affects the tone? The guitar body has strategically placed bare areas that allow the wood to breath and age properly. The primer, sealer and lacquer have no effect on the tone whatsoever. Look at the EVH Wolfgang and tell me Eddie doesn't know what he's doing. Your misinformed friend.
At the same time I don't think it's worth spending loads of money on the best wood, as you can't guarantee a result before the guitar is done. The best looking flamed maple might not be the best sounding one. For sure, different people got different ears and won't agree on what sounds best.
I don't have to film or show you anything. You can call and ask gibson representatives themselves. And having to "look very hard" for a gibson having a floyd rose secures and validates my point. They hardly use them. I can walk to my nearest music shop and find crappy 120$ ibanez guitars with all types of bridges. I'd have to "look hard" to find a gibson with a floyd.
percentage of the Ibanez Guitars that come with EMGs are less than 10%...the only ones that do are 9 times out of 10 Artist Signature series or modified..And not all of ibanez guitars are neon lol why even say that? Ibanez is what started badass paint jobs anyway. Before charvel, bofore Esp, before anybody. A lot of times, people that want a guitar that sounds and plays well prefer an ibanez. Low action, smooth necks, lightweight, WIDE variety, 6,7,8 strings, etc. Gibson is for country dudes.
i use a wood called purple heart for my my guitars. i wish they would make a video to show handmade guitars, the real art work of making guitars. no artist uses a machine to draw his paintings/ sketches. machinery=cheating.
guys....anyday you ask an artist...gibson is better than ibanez...you move from the west to east.....india...singapore...you get gibson assembled in china with their own crapppy materials....at those places ibanez is the best....hell you even get a china made PRS and Les Paul...if you live in the US or europe for that matter Gibson is the best...
total MYTH body's wood doesnt have any influence at sound! just think... if you use softwood and finish the instrument with epoxy paint, all softness gonna be lost the choice of wood can be done for final weight or aesthetic if its transparent stain or varnished search for: PEREIRA, R., LAIBIDA JUNIOR, A., FREITAS, T.. Sobre o acoplamento corda-corpo em guitarras elétricas e sua relação com o timbre do instrumento. Physicæ, Campinas, 9, jun. 2011.
wow... everyone who says wood has no matter in sound of electric guitars are idiots! I work at a music store and work with music/guitars in general. Ok, maybe your not idiots. You just may not know any better. So let me teach you. Look up at next comment^^
The reason why I always watch How its Made is because of the man with his great voice,it relaxes my feelings😄.
Wow!!! Awesome video!!! I'm flabbergasted by all that goes into making a guitar!!!
First here from the How It's Actually Made
Man I love this show!
Cool machine for the frets
Why was this made before i was born
@JTNickelz Whats up with Petruccis Ibanez or Bensons Ibanez?
The only thing i don't like is that when they put the primer, sealer, wood stain, lacquer, it kills the tone of the wood. For best performance of a guitar, just add paint and add some rubbing compound to make it shine.
the only high quality version of this on youtube is the joke one
@JTNickelz I happen to be the proud owner of an Ibanez Ventura electric/acoustic with a bottom cutaway and it is one of the best guitars I've ever owned. I have an Epiphone Les Paul and currently have my eye on 3 Gibson Les Pauls. I have and probably never will modify them other than a string change or a good disassemble-clean-reassemble. I hope that you can understand.
so he screenprint the company name and then proceed to blast over it with 22 coats of spraypaint and laquer... that doesnt make sense...
how did you get this video
@OPOCHKA a clamp doesnt need to be modernised at all. what would it do? clamp the wood down 2 seconds faster?
@JTNickelz so you're saying all guitars sound like shit, when they come straight outta the factory? there is not a perfect one?
It's a Godin Pay attention. It shows them putting on the logo, and it goes on the body, not headstock. Gibson puts it on the headstock, like most companies.
i have a Godin Freeway Classic and a Seagull M-6 cedar acoustic...they are high-quality, great-sounding, affordable guitars...my Freeway classic has a Start sound for about 400 bucks!
im so entertained by this show i drool watching it
google godin guitars and click the MUSICIANS FRIEND page, ull c its not that cheap
@JTNickelz i like ebony , but there aren't electric guitars with ebony fingerboard
the guys who made the guitar for bands like Secondhand Serenade,The JoBros and so forth must be so proud ....
this might be how to make a guitar, but any guitar where the head is a different piece from the neck (at 2:32) is a really cheap guitar!
The terms "fretboard" and "fingerboard" are interchangeable, with the latter actually being the more technical term. Fingerboard is more appropriate in some respects as it the term of choice by most, if not all, major guitar manufacturers. Also, there are fretless basses and guitars. Though fretless guitars are considerably less common than fretless basses, they have been utilized by the likes of Steve Vai, Frank Zappa, and Pat Methany to name a few.
@LaMarche7 That was my first year of playing the guitar, the fretboard and the neck were the same thing to me. Sorry to offend you, perfectionist.
Anything you do to a guitar will have an effect on its sound, wood included. It's just that the tonal difference in wood on a solid body electric is very minimal compared to the electronics.
“The wood has to be dried so it doesn’t warp” that does literally nothing clearly because it still warps eventually anyway
It's good that thay do this so when the guitar gets to ya it doesn't look like you can use as a 90 degree.
emgs sound great. its not the pickups that ibanez is getting wrong. but what range? high end ibanez are very nice. but they equate to a mid range schecter. also, back in the 80s, other great brands we know today didnt have a standing at the time. gibson was the safe way to go. but put humbuckers in a fender and it sounds almost the same through the same amp. which was always marshall. lastly, what do you consider flashy? to me that would be a dean razorback or a bc rich warlock
@MrOzMendez No, I'm saying that part 1 of a video is just part 1. You said only part of a guitar is being made, but that's because the video isn't exactly finished, as obviously stated by the terms "Part 1" and "Part 2." Your criticism is faulty.
I pluck the string, the string will make the body (and neck) vibrate. The body will enhance certain frequencies - or mute some, depends how you see it - and with its own vibration "feedback" on the string so it may or may not ring for longer (depending on original frequency of the played string(s) and what kind of "EQ" the wood provides). The pickup picks up what is left. It's all instant, but this is how I believe it works.
Next up^^^
i really kinda wish they would've shown how an electric guitar is made by hand it would've been really helpful for me to make it as a woodwork project
@AnOddMusician yes there are...
Musicman have rosewood neck guitars.
If you play unplugged on your electric guitar, and gently touch the headstock against a table, wall, or something that will resonate you will hear a distinct difference in tone. Louder and very often nasal (maybe it's all the IKEA furniture...)
i work at a shipping dock here in northern Ga Close to Tennessee where gibson ships from. I constantly load GIBSON USA guitars daily to and from China and Nashville. They are ASSEMBLED in china. Materials from the USA. And first of all, Ibanez is known for using MANY DIFFERENT BRIDGES. That includes floyd rose, licensed floyd rose, hardtail, etc. When was the last time you saw a gibson with a floyd rose? never. Many of Ibanez Bridges are considered equal to FRs. Gibsons were great 30 years ago.
all guitars have frets
hey does anyone know where to get 2 part acrylic lacquer. I can find poly, and nitrocellulose but there is an acrylic finish that dries in 2 hours and i can't seem to find it. by the way that blue guitar in the beginning of the clip has no finger inlays except one.
@MrOzMendez Part 1 here.
Part 2 in that general direction ->>
Put it together and you have pretty much the whole guitar.
Learn2troll
i normally put on that amount on my fingernails, but a guitar! NO way!
i like my american fender strat its great
yay Godin!!
Oh, and i'm totally going to be biased, i swear by ibanez, but gibson is pretty damn boss too. If i had to record any sort of rhythm stuff, give me a chunky ol' les paul, but otherwise i'll stick to a prestige neck.
@metachozoite Also, try playing two different guitars. One by the First Act brand. One by Fender. You'll notice on the First Act that the intonation is impossible to fix due to poor measurement and anything above the 6th fret will sound flat and out of tune. You'll notice that the tuning pegs spin on their own. You'll notice that it just sounds ugly. On the Fender, depending on the model, the the only problem you might have is intonation and that can be fixed in a matter of minutes.
Got a first act acoustic guitar I got when I was four or five it’s got a low e string a g string and a b string hence its name “toothless” it is my absolute favorite guitar to tap on
godin's guitars sounds pretty good
I posted the vid to my band to show what the cables look like going into a Godin guitar. It's kinda like an umbilical cord than just your normal cable.
@iwannagosurfing139 That isn't what I'm saying at all.
Got to love those Godin's!
what episode was this on ?
That's great but Ibanaz is used for metal music I would say and that great to have a guitar for every style, but it's better to have a instrument made for one type of music that the user can play, that's just my opinion, cause two of my favorite metal guitarist use Ibanaz and I think it sounds really great.
Why do they take a board that is the width of a guitar already, cut it, then dry it, then glue it, then dry it again? Why not just use a solid peice of wood? Not only would it be stronger and glueless, but it would eleminate an extra two months of dry time. They all do it, so there must be a good reason. Does anyone know it?
nah. Only the heavenly Ibanezez. Ibanez Rawks!!!!!
Did he say that the frets are made of lead?...
@JTNickelz Oh, that's true...you're right! :) Thank's!
Usually yeah. The Satch custom sounds great, though IMO
1920s? 1950s? Where's this narrator getting this from? I'm sure it was fully complete and made by les Paul around 1960.
In the 20s electric guitars were just acoustics with pickups out in, then up until 1932 they were archtop hollowbodies with pickups, and by 1932 the telecaster was released, quickly followed by the les Paul, both of which were fully solid
@metachozoite I understand where you're going with this, but you're not entirely correct. Some guitars are absolutely brilliant - high end pickups, resilient wood, flawless neck shape, etc. You also have to know how to maintain its value and how well it can be played. A buzzing string isn't always the guitarist's fault. It can be a manufacturing error (uneven fretting, faulty bridge, etc). While it's true that you need to play well to sound good, you also need to have a feasible instrument.
Cool vid I have a telecaster but I have no idea how to play it sum1 help plz
This topic deserves to be made again. The quality of the video is terrible by modern standards. And I think the process has also changed since even cheap guitars are now pretty good as well.
why not glue the wood first and then dry it? that way it wont be taking months for it to dry
Depends which factory, and what type of music. Comparing a Gibson to an Ibanez is like comparing a Ford F-150 to a Celica.
HI MR.ROBINSON
You phrased it like you were saying you weren't quite sure but didn't 100% think so. You should've just said they're not.
@Mr98giuliano Epiphone Les Paul Prophecy GX. :)
@Shazeen82 They modify their guitars, don't they? An Ibanez straight from the factory just doesn't sound good.
@Shrieken213 False as shit. You can do anything with any guitar, doesn't matter what it is. As for sounding better? Depends on the hardware/wood the guitar is made with. Gibsons are generally made of mahogany (les paul, flying v, explorer, etc etc) which have good resonance, no doubt, but shit, they are a bit overpriced as balls. I'll stick to a Ibanez RG with some bare knuckle pickups.
I like how it takes half a year just to make that block of wood.
all i hear is computer guided machine. gibson goes old fashion, one person cuts the neck and doesnt need refrences. thats why gibson is better it has more of a warm sound
hollow bodies sound fuckin epic
Can anyone tell me if Ibanez makes good acoustic bass guitars?
Did you get it
@CHOCOmoney826 : Aply to work for them and be partners, so you can share ideas!!
I didn't know the fret bars were made of nickel and lead. Lead exposure isn't healthful. How do makers get away with that?
Some guitars don't have frets at all.
No, it does not. You think all the guitar manufacturers are going to do something that adversely affects the tone? The guitar body has strategically placed bare areas that allow the wood to breath and age properly. The primer, sealer and lacquer have no effect on the tone whatsoever. Look at the EVH Wolfgang and tell me Eddie doesn't know what he's doing. Your misinformed friend.
Tiger maple :)
@AnOddMusician Yeah that's what I meant, Mr. Specific lol
At the same time I don't think it's worth spending loads of money on the best wood, as you can't guarantee a result before the guitar is done. The best looking flamed maple might not be the best sounding one. For sure, different people got different ears and won't agree on what sounds best.
I don't have to film or show you anything. You can call and ask gibson representatives themselves. And having to "look very hard" for a gibson having a floyd rose secures and validates my point. They hardly use them. I can walk to my nearest music shop and find crappy 120$ ibanez guitars with all types of bridges. I'd have to "look hard" to find a gibson with a floyd.
@myway43 i got a freeway clasic, and it plays better than my lespaul goldtop
Cheap guitar's have a lot of laquer, gibson uses
6 coats
this are godin
@foolintherain100 I bet you they charge a lot for that cheap neck...
The tonal disadvantages are far outweighed by the increase in durability and resistance to the elements!
@Pamahana97 How can your mom hate it?
percentage of the Ibanez Guitars that come with EMGs are less than 10%...the only ones that do are 9 times out of 10 Artist Signature series or modified..And not all of ibanez guitars are neon lol why even say that? Ibanez is what started badass paint jobs anyway. Before charvel, bofore Esp, before anybody. A lot of times, people that want a guitar that sounds and plays well prefer an ibanez. Low action, smooth necks, lightweight, WIDE variety, 6,7,8 strings, etc. Gibson is for country dudes.
omg wow
but there not just a guitar its a bass
I came this whole video
Cummed..
*went
**jk
i thought gibsons are supposed to be hand made >_>
and its easier to find an ibanez with a stoptail than a gibson with a floyd. but the ibanez wont be as nice.
comment removed
haha. he calls it "ultraviolent" light.
i use a wood called purple heart for my my guitars. i wish they would make a video to show handmade guitars, the real art work of making guitars. no artist uses a machine to draw his paintings/ sketches. machinery=cheating.
:D Godin! I love my Godins! I have two!
two minutes twenty nine seconds. its backwards.
only when it has frets ; )
No he didn't. He said, "Ultraviolet."
oh okay lol
Godin.
guys....anyday you ask an artist...gibson is better than ibanez...you move from the west to east.....india...singapore...you get gibson assembled in china with their own crapppy materials....at those places ibanez is the best....hell you even get a china made PRS and Les Paul...if you live in the US or europe for that matter Gibson is the best...
Gibson is my shit
total MYTH
body's wood doesnt have any influence at sound!
just think... if you use softwood and finish the instrument with epoxy paint, all softness gonna be lost
the choice of wood can be done for final weight or aesthetic if its transparent stain or varnished
search for:
PEREIRA, R., LAIBIDA JUNIOR, A., FREITAS, T.. Sobre o acoplamento corda-corpo em guitarras elétricas e sua relação com o timbre do instrumento. Physicæ, Campinas, 9, jun. 2011.
I know this is old but that softwood thing is the most retarded things I've ever read
You don’t play do you ?
Gadin guitars? WTF?
wow... everyone who says wood has no matter in sound of electric guitars are idiots! I work at a music store and work with music/guitars in general. Ok, maybe your not idiots. You just may not know any better. So let me teach you.
Look up at next comment^^