Hi Aryaman ☺️ You did a fantastic job on this papermodel! I am more than happy to see the way you figured out the building instructions without proper help from my side. You can share your feedbacks with me about the model, regarding the difficulties you have faced while making the model, so that I can improve the design. The model looks absolutely stunning and kudos to your craftsmanship that it looks so beautiful. Kudos to all who supported your work. 🙏😇
Thanks a lot mate! It was your design which has been crafted to this beauty! About the difficulties, I would say if someone makes this model without LED, there are not a lot of problems. However when I made it with LEDs, cable management was the major problem. The design itself was not too difficult. Still, I would say that I did not use any glue tabs which were present along with the fuselage parts. I cut them off and designed new glue tabs which make the plane's body look neat. So you can try adding separate glue tabs (hermercraft has said in one of his vid how inner glue tabs are better, so I used inner glue tabs). Also, the engines do not have any glue tabs. You can try designing them. I think you can also change the way wings attach. But that is your choice. You may have seen how I attached the wings by placing a cardboard piece, because the original design was taking a lot of space inside the fuselage and the battery would not fit. So you can change it or you may not, because without wires, the original design is enough. Sorry for such a long message 😅
@@theundercoverguy you are most welcome. Yes, the thing about glue tabs is true. I will make them separately. Apart from the led cable management, the central wing support could have been modified to let the cables pass through. You have given me a challenge which will help me to understand and design a model even better. I realize that to design a good model, a designer have to think from the makers perspective most importantly. ☺️👌
Nice work bro,great hard work,from the Beginning I saw u ,u loved aeroplanes I know u must have done a lot of hard work to finish up with this aeroplane's paper model Congos!!!!
Hello Mr Aryaman. I'm new on paperwork modelling and liked your video very much. It motivated me to start and learn about this hobby. Please allow me to ask: where can you buy the plans/models? Is it in (internet) shops like Fly Models, Gryhobby etc....? Thanks.
Hey dude, Nice job on the kit just a few questions. Im 14 and i wan’t to learn how you did the lights, And what glue you used and how you rolled the paper!
Hello, @The Undercover Guy is a beautiful model, I would like to know if the names of the piece's circuit are known so, for example, the piece Arduino Nano, is the correct name?
Hello @Aryaman I have seen the video where air berlin and I built the circuit as per the instructions, but I can only turn on one group of lights at a time, that is, the 1 button of the DIP switch, opens the circuit, the 2 turns on the navigation lights, the 3 turns on the nose lights and wings for landing, the 4 strobe lights; however, in my case, I only turn on one group of lights, I do not turn on the 4 at a time and the strobe lights do not work, could you help me, thank you very much.
Hello! It would be difficult for me to accurately assess your problem without checking your circuit. There may be an error in Arduino coding, due to which strobe lights are not functioning. Make sure that the wires are not making contact in the wrong places. I can’t really say much without having a look at the circuit. Also I won’t be available for a few months, so you might not hear from me for a while. Hope that helps!
I drew the circuits on sheets of paper which are no longer around.. will try to remake the diagrams and link them here. It may take a while though as I don’t remember exactly how the circuits were designed
@@latchytan You can find info about the circuit, code used and materials here: mega.nz/folder/uKY20RoT#tCFEi0R7ge8jqh3LpRiPkQ The circuit diagram is not very professional but it was the best I could do...
That’s a hell lot of work for a guy your age. Kudos to your talent, artistry and finesse. 👏🏻
Hi Aryaman ☺️
You did a fantastic job on this papermodel! I am more than happy to see the way you figured out the building instructions without proper help from my side. You can share your feedbacks with me about the model, regarding the difficulties you have faced while making the model, so that I can improve the design. The model looks absolutely stunning and kudos to your craftsmanship that it looks so beautiful.
Kudos to all who supported your work. 🙏😇
Thanks a lot mate! It was your design which has been crafted to this beauty! About the difficulties, I would say if someone makes this model without LED, there are not a lot of problems. However when I made it with LEDs, cable management was the major problem. The design itself was not too difficult. Still, I would say that I did not use any glue tabs which were present along with the fuselage parts. I cut them off and designed new glue tabs which make the plane's body look neat. So you can try adding separate glue tabs (hermercraft has said in one of his vid how inner glue tabs are better, so I used inner glue tabs). Also, the engines do not have any glue tabs. You can try designing them. I think you can also change the way wings attach. But that is your choice. You may have seen how I attached the wings by placing a cardboard piece, because the original design was taking a lot of space inside the fuselage and the battery would not fit. So you can change it or you may not, because without wires, the original design is enough. Sorry for such a long message 😅
@@theundercoverguy you are most welcome.
Yes, the thing about glue tabs is true. I will make them separately. Apart from the led cable management, the central wing support could have been modified to let the cables pass through. You have given me a challenge which will help me to understand and design a model even better. I realize that to design a good model, a designer have to think from the makers perspective most importantly. ☺️👌
Rightly said!
Way to go man!! 😳Good luck for future
Thank you!
Congratulations on an incredible job! Flawless and amazing performance 👍🏻
Brilliant work.
Keep going you lil bunch of talent.
Wonderful✨😍 genius
Nice work bro,great hard work,from the Beginning I saw u ,u loved aeroplanes I know u must have done a lot of hard work to finish up with this aeroplane's paper model
Congos!!!!
Thanks a lot my friend!
NICE that is good BAN
Oops it was NAN
Amazing work 👍 It’s as close to the real one as it gets. I like the video and the background music selection. Well done 👍
Wow, very wonderful, i very like it, good job my friend, keep it up👍👍😁😁👏👏👏👏👏
Terrific !!
This is truly above and beyond 🔥🔥
Great work aryaman 👍🏻
Outstanding Work!
Keep it up👍🏻
That's unrealistic 🤩🤩 You've done a great job🎉🥳
Is this a mean comment yes so do your video and make a model let me see
You deserve more subscribers than this amount!
Thank you so much man it means a lot!
Woow love from India
Thanks mate! 🇮🇳
Op 🤍👍
Superb!👍🏻
Superb! 😍 This guy is extraordinary 👏🏻👏🏻
Well Done !!! Dear Aryaman 👌👌
Beautiful work!
LOOKKIN NICE
Oh wow!
cool !
good job, it would be great if you made a video on how to connect the led lights ✈️
Wow, totally awesome! 🎯👊🏼
ty
hope you make a lighting instructions of the led lights you used. Thanks 😊
mega.nz/folder/uKY20RoT#tCFEi0R7ge8jqh3LpRiPkQ
It doesn't contain instructions as such... but should be helpful
WHOO, 8.6k LIKES, LETS GOO BOII
Nice job 👍🔥
👍👍 great bro
Thank you 😃
@@theundercoverguy wlcm
nice biuld
nice man
Hello Mr Aryaman. I'm new on paperwork modelling and liked your video very much. It motivated me to start and learn about this hobby. Please allow me to ask: where can you buy the plans/models? Is it in (internet) shops like Fly Models, Gryhobby etc....? Thanks.
Hey dude, Nice job on the kit just a few questions. Im 14 and i wan’t to learn how you did the lights, And what glue you used and how you rolled the paper!
Paper?!
Hey! Yes this is paper... thanks for watching mate
Hello, @The Undercover Guy is a beautiful model, I would like to know if the names of the piece's circuit are known so, for example, the piece Arduino Nano, is the correct name?
Please can you make a tut about how you wired the lights and what you used
I can’t make a tutorial for that but you should find some diagrams in the description
Qual é o tipo de folha que vc usou?
Hello how can I download the stand?
Hello! You can download it from this link
mega.nz/file/29w1CSqK#isxfSZWt4jVWp7SBoWOy6oowo4t-la2bG3VCmAn__Uo
Tell me if it works or not 👍🏻
hey mate, what glue you use
Hello @Aryaman I have seen the video where air berlin and I built the circuit as per the instructions, but I can only turn on one group of lights at a time, that is, the 1 button of the DIP switch, opens the circuit, the 2 turns on the navigation lights, the 3 turns on the nose lights and wings for landing, the 4 strobe lights; however, in my case, I only turn on one group of lights, I do not turn on the 4 at a time and the strobe lights do not work, could you help me, thank you very much.
Hello! It would be difficult for me to accurately assess your problem without checking your circuit. There may be an error in Arduino coding, due to which strobe lights are not functioning. Make sure that the wires are not making contact in the wrong places. I can’t really say much without having a look at the circuit. Also I won’t be available for a few months, so you might not hear from me for a while. Hope that helps!
Do you have a circuit diagram for this?🙏🏻
I drew the circuits on sheets of paper which are no longer around.. will try to remake the diagrams and link them here. It may take a while though as I don’t remember exactly how the circuits were designed
@@theundercoverguy wow thank you I will wait for that. Your work are truly amazing 👌🏻
@@theundercoverguy where abouts did you get the lights and controllers from aswell?
@@isaacpatman5255 i got the lights, switches and arduino nano from amazon, and wires from local shops
@@latchytan You can find info about the circuit, code used and materials here: mega.nz/folder/uKY20RoT#tCFEi0R7ge8jqh3LpRiPkQ
The circuit diagram is not very professional but it was the best I could do...
what paper did you use to make the build
Plain 140 gsm paper
@@theundercoverguy but lots of other people people said 160 gsm
Papercraft aeorplane 737-900
It looks so small
That's because it is small 😄the scale 1:100 or 1:120 i think
That's what she said
@@donaldstanfield8862 i did not notice it
In fit pl a303
Y