Nice presentation. Each and every minute steps you explained and showed at close, clearly visible shots very well. Appriciate cameraman and to the team.
Thanks I appreciate that I had to crawl all the way under there and it was a tight space it’s hard to work on sinks like that but got it done thank you for watching
Thank you Tom! This was a great video. Just wanted to ask, do you know what size the nut is with the two screws near the beginning of the video? I went to put everything together and the nut was missing from our box
Best thing to do is take it in with you to Home Depot and try to find one that will fit. Just let them know that you brought it with you so they don’t think you’re stealing it. Good luck thanks for watching.
On a few other videos, they mentioned backing the brace underneath back off a little and screwing the 2 screws against the plate instead of plate being flush against the sink with only the brace?
Yes you can screw the screws up and push the plate if you want I guess it could work both ways mine seems to be holding pretty good after a year thanks for watching
Hey Tom. I watched a video the other day where you installed a Glacier Bay Pull Down Faucet for your grandmother. Was just wondering if you were replacing that GB so soon was their some issues with that one or if there were any issues with that one? I just bought the Glacier Bay you demonstrated previously and i haven't installed it yet.
For some reason this glacier bay would not turn on the hot water so something went wrong with it I’m not sure what it was but we bought this one on Amazon and it works great and I think it’s got a better attachment for underneath the counter good luck thanks for watching
I’m not quite sure on this particular model. If you can detach it up top most you can you would have to look and see it’s been a while since I did this one.
My Owofan faucet has the split nut for mounting, which will not stay tight. Is there an option to get a similar nut like the one in your video? What size would I need?
I would take the one that you have a split that fits and try going to Home Depot and find one that would match with the same threads in the same diameter. Good luck thanks for watching.
The gray line is the one for the weight so that you can pull out the spray head and it will retract because of gravity pulling the weight down good luck thanks for watching
I can’t get the hot and cold hose to stay in their place The part that came connected to the faucet I was hooking them up before putting it through the sink hole it stayed then just fell out lmao
Glad to hear it. Good luck on the install. Thank you for watching.
Nice presentation. Each and every minute steps you explained and showed at close, clearly visible shots very well. Appriciate cameraman and to the team.
Thank you so much 🙂 good luck on your install and thanks for watching
This has been so useful! Thank you. No one else I saw even showed underneath lol.
Thanks I appreciate that I had to crawl all the way under there and it was a tight space it’s hard to work on sinks like that but got it done thank you for watching
Thank you Tom! This was a great video. Just wanted to ask, do you know what size the nut is with the two screws near the beginning of the video? I went to put everything together and the nut was missing from our box
Best thing to do is take it in with you to Home Depot and try to find one that will fit. Just let them know that you brought it with you so they don’t think you’re stealing it. Good luck thanks for watching.
On a few other videos, they mentioned backing the brace underneath back off a little and screwing the 2 screws against the plate instead of plate being flush against the sink with only the brace?
Yes you can screw the screws up and push the plate if you want I guess it could work both ways mine seems to be holding pretty good after a year thanks for watching
Thanks happy holidays🎉
Thanks guys! Leaving the screws in really helped with the tightening
Yep, you need those to really crank it down
I just got one from Amazon for $37 dll
Thanks for the video and tips
We like ours and for the price you can’t beat it thank you for watching. Happy holidays.
@@TomLeeman❤
Great job, fellas. That was exactly what I needed.
Excellent glad we could help you good work on your job and thanks for watching
Thanks for the video!
You're welcome! Good luck on your install and thanks for watching
Hey Tom. I watched a video the other day where you installed a Glacier Bay Pull Down Faucet for your grandmother. Was just wondering if you were replacing that GB so soon was their some issues with that one or if there were any issues with that one? I just bought the Glacier Bay you demonstrated previously and i haven't installed it yet.
For some reason this glacier bay would not turn on the hot water so something went wrong with it I’m not sure what it was but we bought this one on Amazon and it works great and I think it’s got a better attachment for underneath the counter good luck thanks for watching
Can you replace just one hose? Like the cold water hose
I’m not quite sure on this particular model. If you can detach it up top most you can you would have to look and see it’s been a while since I did this one.
Does the top part with the coil hose girder just sit in the base or dose the top part snap into the base part?
The top is all one piece for me. I just sent it through the hole and tightened it down.
Dude with the dreads style is pretty cool lol
That’s my brother he’s a professional musician. His band is called Big medicine. They’re very famous. Thanks for watching.
My Owofan faucet has the split nut for mounting, which will not stay tight. Is there an option to get a similar nut like the one in your video? What size would I need?
I would take the one that you have a split that fits and try going to Home Depot and find one that would match with the same threads in the same diameter. Good luck thanks for watching.
As long as it’s not leaking, I think it should work
So you only need to hand tighten the feed lines?
You could use a tool
@@TomLeeman no way??? I’m asking for a reason,is hand tightening it good enough?
Super☺️👍👍👍
Thank you! Cheers!
I have the same faucet, but it only came with 2 lines. What is that 3rd line?
The gray line is the one for the weight so that you can pull out the spray head and it will retract because of gravity pulling the weight down good luck thanks for watching
I can’t get the hot and cold hose to stay in their place
The part that came connected to the faucet I was hooking them up before putting it through the sink hole it stayed then just fell out lmao
Whoops good luck on your install. Thanks for watching.
8:22 and 8:56
Can’t help myself but “Thats What She Said!”
We try to add a little comedy whenever possible thanks for watching
Mines is leaking from battery pack / quick connect
I’m not quite sure why you have a leak
@ I later found the o rings thank you
Mine is leaking at the handle, any help?
Can you tighten it down a little bit?
Nothing like 2 sets of hands and is it in yet without laughing.
Finally got it done
definitely leave the screws in. lol .. trust me
Thanks appreciate it and thanks for watching
My cold supply line is leaking from up inside the faucet body. How to fix it?
It must need to be tightened down