Thank you for this video i recently bought a crystal xbox original from a second hand store it was modded i followed the steps and broght the xbox back to factoy standards
I've installed the DVD, but got me a problem while i was restoring, so i out the disc off and put It back. Now my Xbox has a Red light and a service required. What can i do now????
I’m new to modding, recently got an OG Xbox with old soft mods installed. I want to restore the console to factory settings/wipe the hard drive so I can start new. All I need is a blank DVD-R disc and to download TruHexen 2021 to it? I’m lost anything helps, thank you.
yes definitely thanks for posting this yeah I also had no idea that there was a compatibility issue with what type of disc you burn it to.. thankfully I kept some kicking around offhand do you know which discs this should be most compatible with or what you had luck with. i got locky with a hp DVD-R also did you get an error after you got done burning your disc
I'm trying to learn how to copy these the files I downloaded I got image burn and I have cr CDs Maxwell do those actually work to Burnham image burn with the files that I used I used the files to Burnet but seems like I'm going to load up if I'm not doing it right
Anyway to reset this after modding when you can't see anything? Initially after softmodding everything seemed fine except I had a double screen. I googled and found that the resolution settings might be the culprit and not allowing video to sync up properly and so I changed the resolution and now after it initially boots up the screen goes blank and my monitor turns off because it's not getting any signal from the retrotink which is being fed by the og xbox. Can't seem to find a solution never mind knowing what to even look for and so am trying to figure out how to reset it without being able to read a menu.
I honestly wish I had an answer on that. Jeff Chen would be the go to on the Tink. Modzville might be able to advise on the Xbox side. They're both really active on Twitter. I'm sorry I'm not much help with that.
@@GameInterest Found out that if I press the back+Y buttons it takes me to a blue menu and I can change settings, however, it doesn't save the settings and so now I need to figure that out. As soon as I get the ElectronXout HDMI adapter I ordered I'll take the retrotink out of the equation to see if that's the culprit.
Thank you for this video i recently bought a crystal xbox original from a second hand store it was modded i followed the steps and broght the xbox back to factoy standards
this worked perfectly!! thank you!!
I'm happy it helped! Thanks for watching.
Worked like a charm, thanks!
What is the name of the dashboard you have before doing the manufacturing restoration process, how it is installed and demosd is very beautiful!
If the disk drive doesnt work, can I put the dongle USB drive adaptor and put the file in it that way?
I've installed the DVD, but got me a problem while i was restoring, so i out the disc off and put It back.
Now my Xbox has a Red light and a service required.
What can i do now????
I’m new to modding, recently got an OG Xbox with old soft mods installed. I want to restore the console to factory settings/wipe the hard drive so I can start new. All I need is a blank DVD-R disc and to download TruHexen 2021 to it? I’m lost anything helps, thank you.
Sorry about the late reply, but yup that's all you doing need to restore it if it's already soft modded.
Does it work with FTPXP?
Is there a way unmodding my Xbox without this disc on hand, I have mini-Linux installed and wanna remove this to stock
Thanks mate for your help 👍
No problem!
yes definitely thanks for posting this yeah I also had no idea that there was a compatibility issue with what type of disc you burn it to.. thankfully I kept some kicking around offhand do you know which discs this should be most compatible with or what you had luck with. i got locky with a hp DVD-R also did you get an error after you got done burning your disc
I don’t have a dashboard just the modded dashboard startup is it possible to revert to stock?
I'm trying to learn how to copy these the files I downloaded I got image burn and I have cr CDs Maxwell do those actually work to Burnham image burn with the files that I used I used the files to Burnet but seems like I'm going to load up if I'm not doing it right
Anyway to reset this after modding when you can't see anything? Initially after softmodding everything seemed fine except I had a double screen. I googled and found that the resolution settings might be the culprit and not allowing video to sync up properly and so I changed the resolution and now after it initially boots up the screen goes blank and my monitor turns off because it's not getting any signal from the retrotink which is being fed by the og xbox. Can't seem to find a solution never mind knowing what to even look for and so am trying to figure out how to reset it without being able to read a menu.
I honestly wish I had an answer on that. Jeff Chen would be the go to on the Tink. Modzville might be able to advise on the Xbox side. They're both really active on Twitter. I'm sorry I'm not much help with that.
@@GameInterest Found out that if I press the back+Y buttons it takes me to a blue menu and I can change settings, however, it doesn't save the settings and so now I need to figure that out. As soon as I get the ElectronXout HDMI adapter I ordered I'll take the retrotink out of the equation to see if that's the culprit.
@@ayellowbeard thank you for letting me know! I'm going to pin your original comment to the top so it can help out anyone with the same issue.
@@GameInterest Am still having issues, however, now I can at least go back to the factory OS if I need to. Cheers!
Do u need a disk to reset?
Idk if you’re still responding to comments a year and a half later but does this work for ANY softmod?
I've tried it 3 times in total and it's worked for me each time.
So I tried burning it on the disk and the Xbox said it couldn’t read it. Is it a problem with the type of disk I’m using or something else?
@@tommywhite1198 will the Xbox read other discs? If so, it could be the burn settings. If it won't read anything, it's likely the drive.
It reads other disks just fine, this one doesn’t work for some reason.
The mod is Evolution X btw
Can this remove any soldering mods
Software isn't soldered
Do u by any chance sell the cds that have the program
Nope. I'll never sell someone else's work. The link to download the ISO is in the description though.
Is Heimdall better than Rock5?
I might be wrong but as I recall Rocky5 is more user friendly but not as full of features as Heimdall/Hexen.
I have a 150gb hd does it matter if i restore it to original or would it fail because it will need to register original 8gb hd?
Sorry, stock needs 8GB.
Are you unzipping the folder before burning it?
Replying to this because I have the same question
Does this work with newer softmods?
As far as I'm aware it works. It works with the few I've tried.
Why is your UI all green?
I assume it's the dash
The normal Xbox dash