I tried so hard to get big bear mount but in auzzie it was almost impossible so I got a rock solid kinetic motor mount and a dyna true track stability system all great stuff
Ah yeah I’ve tried ordering stuff from Oz and it’s always tough to get it. Which sucks because y’all got some good 4x4 stuff over there. If you never seen 4wd24/7 check them out on UA-cam! One of my favorite shows. But I’m glad the true track and kinetic worked out for you, and haha yeah sucks when you gotta remove the pipe. It happens more often then not lol
Nice job boyz, I'm generally a freakin scardy cat to spin wrenches beyond oil changes and pegs and shit but bruh you guys give me confidence. Helllzzz yes dudes.
Stoked to hear that! One of the reasons why we decided to do a little install vid was to show that even out front of the garage on the floor you can get the job done. Just take your time and have fun. Also helps to have a little liquid courage and some friends around! Handle it brother 🍻
Time to get an expert opinion. I’m doing floorboards and a center stand on the Road King this weekend and I want to make sure that I’m prepared. The winter ale that I’ll be drinking is only about 7.2% ABV and they’re only available in 22 oz cans. How many cans should I need to do this job properly? Keep in mind that, expert opinion or not, any answer less than 3 will have to be rejected on religious grounds.
😂🤘🏽 well a beer per floorboard plus 1 while doing the center stand, that brings ya to 3. The last one is the celebration beer. That’s the one when everything is done you sit back and stare at your bike and all the work you did. So yeah I believe 4 will be enough haha Can’t go wrong with a 22oz 7.2 winter ale! I might need to pick up something similar! Cheers brother 🍻
Random question. Does the ‘99 FXD have longer fork tubes? If so, how long? +2? I know the Sportster has the longer tubes. Love your videos, I ride the same local places.
Did BBC change their design? The one they used to sell was aluminum and slotted for multiple positions to align the drivetrain…? I installed a similar looking one from Chopper Hauss but it was way to ridgid with a 117 motor and had to take it off unfortunately 😔
I think the ones they make for the newer dynas have the slotted design. Because I’ve definitely seen those. And that sucks the chopper Hauss didn’t work for you, did you go with anything else or just back to stock?
@@Builtonbeers I’m using new OEM isolators combined with the Sputhe stabilizer links. Had them on previously and wasn’t super impressed, however after replacing the isolators and heims I found that was my problem in the first place. Works phenomenal, even treating the bike like it’s a supermoto weekly on the “tail of the dragon”
![Lp. Точка Невозврата #2 СТАРИНА ВРЕМЯ [Смотрящий] • Майнкрафт](http://i.ytimg.com/vi/rBEcp1Ebl54/mqdefault.jpg)
Maaaaate from downtown down under Aussie mate Loza definitely a 6 pack of beers job
😂🍻🍻🍻🍻🍻🍻
Beautiful Bikes!! Informative video. ❤
Dope vid boyz
Super informative!!! and your dad is helping love it.
Cheers from Prescott AZ. Nice putt from Vista to Barrio Logan. I miss the year round riding, I yearn for it sometimes. Thanks for the share!
Mate of got mini floor boards from Kuryakyn USA on my dyna and there great
My dad actually been looking at some Kuryakyn for his sporty. Always see there stuff at Harley, maybe a little Christmas present for the old man
I tried so hard to get big bear mount but in auzzie it was almost impossible so I got a rock solid kinetic motor mount and a dyna true track stability system all great stuff
Ah yeah I’ve tried ordering stuff from Oz and it’s always tough to get it. Which sucks because y’all got some good 4x4 stuff over there. If you never seen 4wd24/7 check them out on UA-cam! One of my favorite shows.
But I’m glad the true track and kinetic worked out for you, and haha yeah sucks when you gotta remove the pipe. It happens more often then not lol
Nice job boyz, I'm generally a freakin scardy cat to spin wrenches beyond oil changes and pegs and shit but bruh you guys give me confidence. Helllzzz yes dudes.
Stoked to hear that! One of the reasons why we decided to do a little install vid was to show that even out front of the garage on the floor you can get the job done. Just take your time and have fun.
Also helps to have a little liquid courage and some friends around!
Handle it brother 🍻
Awesome channel and Love your videos bro ! Keep them coming!
Thanks for the support!! Cheers!
Pops got some knowledge 👍
I never knew I needed to drink 8 beers to complete an install like this! Don’t worry, I work on my bike for entertainment purposes only…😂
Truly built on beers 🍻
Time to get an expert opinion. I’m doing floorboards and a center stand on the Road King this weekend and I want to make sure that I’m prepared. The winter ale that I’ll be drinking is only about 7.2% ABV and they’re only available in 22 oz cans. How many cans should I need to do this job properly? Keep in mind that, expert opinion or not, any answer less than 3 will have to be rejected on religious grounds.
😂🤘🏽 well a beer per floorboard plus 1 while doing the center stand, that brings ya to 3. The last one is the celebration beer. That’s the one when everything is done you sit back and stare at your bike and all the work you did. So yeah I believe 4 will be enough haha
Can’t go wrong with a 22oz 7.2 winter ale! I might need to pick up something similar!
Cheers brother 🍻
Did you get the typical dyna wobble before you installed this?
Random question. Does the ‘99 FXD have longer fork tubes? If so, how long? +2? I know the Sportster has the longer tubes. Love your videos, I ride the same local places.
Thanks brotha! Yes the FXDX has 2 over tubes & a patriot spring kit inside.
We’ve been slow posting with the all the holidays new vids coming soon!
Any issues later with the crash bar mounted i side the big bear brackets? I was ablut to mount my bar the same way but big bear told me mot to.
Naw we didn’t run into any issues. Randy rides that bike daily to work.
@@Builtonbeers good to know! Thanks!
Did BBC change their design? The one they used to sell was aluminum and slotted for multiple positions to align the drivetrain…? I installed a similar looking one from Chopper Hauss but it was way to ridgid with a 117 motor and had to take it off unfortunately 😔
I think the ones they make for the newer dynas have the slotted design. Because I’ve definitely seen those. And that sucks the chopper Hauss didn’t work for you, did you go with anything else or just back to stock?
@@Builtonbeers I’m using new OEM isolators combined with the Sputhe stabilizer links. Had them on previously and wasn’t super impressed, however after replacing the isolators and heims I found that was my problem in the first place. Works phenomenal, even treating the bike like it’s a supermoto weekly on the “tail of the dragon”
That other fella not Eli dad the other dude’on the bike could do with some weight on
Haha my boy eats more than me! He rock climbs so that keeps him lean!
I just surf and drink beers hahaha
I'm just here to tell you did something wrong...not with the bike...beers need to be in a cooler or fridge...😂😂😂🍻🍻🍻
Haha dang it! You’re right!!!!
Good vid , think I would have bought a bike jack but I’m also for whatever gets the job done 👍🤙
Nothing worse than when your pipe blocks/you’re way