After 10 years testing the previous products, Easy Wash Australia is a new soap designed specifically for Australian and American trucks, for their conditions. Trust me, this new products are awesome
We recommend washing from bottom up or side to side to remove one layer of dirt at a time. Washing from top to bottom will accumulate the layers of dirt on top of each other, which will make it harder to remove all the dirt. Our soap penetrates the dirt and lifts it up. After about a minute, the soap is between the duco and the dirt. Now (just like with shaving) you must cut off the soap with dirt using Pressure Washer around 2500 - 3000 Psi, which is faster than using a brush or sponge. To wash Rod Train with old method "broom and bucket" you need about 4- 5 hours With our method you can wash it in less than an hour. The prime mover one man washes it in 15 min. More info on www.EasyWashAusralia.com.au
We recommend washing from bottom up or side to side to remove one layer of dirt at a time. Washing from top to bottom will accumulate the layers of dirt on top of each other, which will make it harder to remove all the dirt.
' better truck go throught truck washing machine with big 3 rolling brushs and soapy plus hot cover waxy... left side = top = right side then last under bottom... both side of cones rolling washs the rims = wheels
Auto waschen ist der Traum eines jeden Kindes, und wenn sie dann groß sind, machen sie es auch. :-) Car washing is the dream of every child, and when they are big, they do it too. :-)
We recommend washing from bottom up or side to side to remove one layer of dirt at a time. Washing from top to bottom will accumulate the layers of dirt on top of each other, which will make it harder to remove all the dirt.
We recommend washing from bottom up or side to side to remove one layer of dirt at a time. Washing from top to bottom will accumulate the layers of dirt on top of each other, which will make it harder to remove all the dirt.
framfull I'm with you, there's just some things a pressure washer just can't get off. I guess it depends on how clean you like your truck. In this case I'm guessing A quick spray and rinse is good enough. But for me the brush is the way to go.
I is OK If you prefer the old method. For this purpose our soap can be diluted 1: 300. This means that you will get 7,500 L from a single 25L container. Not bad.
Sorry but you don't get it. First, you don't spray only foaming. With spray, the soap flows down and yes, you need to use a brush. Foam stands in the same place, penetrate dirt and lift him up. Next don't rinse only wash.You "Shave of" the foam with dirt with pressure washer 3000 - 4000 psi. On the and you rinse off. This system we call snow foam and works perfectly. The secret is in the soap which consists of 9 components. Please see my other videos ua-cam.com/video/XGnTLPW8KIA/v-deo.html
He didn't wash the first foot of the forward trailer, he only washed this half of the front of the second trailer, and he didn't wash the tractor at all....come on now.....
Easywash Australia when I did this it was just a mild detergent soap that we had so we had to use the broom as well to get it clean plus the pressure washer we had was a piece of crap lol.but I like this system
We recommend washing from bottom up or side to side to remove one layer of dirt at a time. Washing from top to bottom will accumulate the layers of dirt on top of each other, which will make it harder to remove all the dirt.
somewhat illogical as the man washes the truck. Normal would be to start at the top and wash down. So he has to do the work twice. The same is when you soak the truck with foam, always from top to bottom.
Nope - applying foam should be done from the bottom to the top - this way the foam always sits directly on the dirt - otherwise it would be applied on the pouring mixture of foam and dirt from the upper parts. And it is always visible which part has been already treated with foam. But then you rinse from the top to the bottom.
This truck was not washed long time. Watch the first part. In the place where there was soap, dirt is gone without problem. In a place where there was no soap, there is no possibility to wash. This It is Clearly visible
This video pissed me off so bad!!! If your getting paid to do a job, do it right!! Don't half ass it! On top of that, know the chemical your using and know how to use it properly. This guy definitely doesn't have a clue what he's doing.
Actually the Snow foam system It is the best, the fastest and at the same time the cheapest way to wash a truck. 1L Easy Wash Soap washes 5 trucks, 15 min each truck
Try washing top to bottom rather than the more impractical down up
Music reminds me of Billy Connelly.
Blue Beacon in Australia 🇦🇺 please, someone make the call! That would help their truck washing problems. Super long wash bays in Salt Lake City, Utah.
We are in Australia. more info, wwwEasyWashAustralia.com.au
Gerald Beasle
Hola mi gusto lavar camiones
I'd like to know what kind of Soap this is to watch Trailers
In that case theres a big potential in Europe. But I guess it wont remove wintersalt after driving a week or two in those conditions.
After 10 years testing the previous products, Easy Wash Australia is a new soap designed specifically for Australian and American trucks, for their conditions. Trust me, this new products are awesome
I like how he starts washing from the bottom he must not know about gravity haha
Casey Davidson that's how you wash big rigs...the dirt being pushed up removes more dirt as you go up.
We recommend washing from bottom up or side to side to remove one layer of dirt at a time.
Washing from top to bottom will accumulate the layers of dirt on top of each other, which will make it harder to remove all the dirt.
Our soap penetrates the dirt and lifts it up.
After about a minute, the soap is between the duco and the dirt.
Now (just like with shaving) you must cut off the soap with dirt using Pressure Washer around 2500 - 3000 Psi, which is faster than using a brush or sponge.
To wash Rod Train with old method "broom and bucket" you need about 4- 5 hours
With our method you can wash it in less than an hour.
The prime mover one man washes it in 15 min.
More info on www.EasyWashAusralia.com.au
Jonathon Thompson lol
Casey davidson.
You must've been elsewhere when they were handing the brains out 'ey!
We recommend washing from bottom up or side to side to remove one layer of dirt at a time.
Washing from top to bottom will accumulate the layers of dirt on top of each other, which will make it harder to remove all the dirt.
hardest worker in this video is the poor bastard playing the banjo
and you notice they can't do a good job of it - truck washer leaving the front couple of feet dirty
that's good foam. what is it?
Saludos como se consigue sede producto soy de Puerto Rico
'
better truck go throught truck washing machine with big 3 rolling brushs and soapy plus hot cover waxy...
left side = top = right side then last under bottom...
both side of cones rolling washs the rims = wheels
I would like to buy your products and your machine,how can I do that?
I want to wash a semi now
Brian Evans no you dont
lol
Brian it's fun for about an hour and then you realize that its 40 degrees out and your soaking wet and would rather be home
Brian lol i have to go wash semis in like 4 hours please shoot me
What soap are you using..?
this is a Easy Wash Diamond 1:300 More info on wwwEasyWashAustralia.com.au
Easywash Australia cheers bloke. Sorry for the late reply. I had a go at it. Bloody awesome stuff.
No worries mate
what chemical are you using ?
Easy Wash Diamond. Dilution 1:300 More info on www.EasyWashAustralia.com.au
No Brasil tem esse produto alguém tem resposta
And the other seit of the truck and trailer?
In part 1
Auto waschen ist der Traum eines jeden Kindes, und wenn sie dann groß sind, machen sie es auch. :-)
Car washing is the dream of every child, and when they are big, they do it too. :-)
Franz Otto bloß die Autos werden größer mit den Jahren.😂
Quiero el sonido no la música por favor y esta genial el camión
How about the roof ??
Willem Streutgers walking floor trailers have lids that open and are usually made of fabric mesh like shade cloth.
Que liquidos usan para eso
Excellent travail, bravo. Gérard de France.
Qual é o produto usado?
Why do they never clean the roof?
I’d like to see you try
What about the other hand side.
We left something for you :)
Help me. Vietnamese ?
Why dont u all wash from top to bottom ??
We recommend washing from bottom up or side to side to remove one layer of dirt at a time.
Washing from top to bottom will accumulate the layers of dirt on top of each other, which will make it harder to remove all the dirt.
u should clear from the top
We recommend washing from bottom up or side to side to remove one layer of dirt at a time.
Washing from top to bottom will accumulate the layers of dirt on top of each other, which will make it harder to remove all the dirt.
true true@@easywashaustralia6359
No matter how good the cemical is, still needs brushing.
Trust me, Many people use our method without brushing
framfull I'm with you, there's just some things a pressure washer just can't get off.
I guess it depends on how clean you like your truck. In this case I'm guessing
A quick spray and rinse is good enough. But for me the brush is the way to go.
I is OK If you prefer the old method. For this purpose our soap can be diluted 1: 300. This means that you will get 7,500 L from a single 25L container. Not bad.
Sorry but you don't get it. First, you don't spray only foaming. With spray, the soap flows down and yes, you need to use a brush. Foam stands in the same place, penetrate dirt and lift him up. Next don't rinse only wash.You "Shave of" the foam with dirt with pressure washer 3000 - 4000 psi. On the and you rinse off. This system we call snow foam and works perfectly. The secret is in the soap which consists of 9 components. Please see my other videos ua-cam.com/video/XGnTLPW8KIA/v-deo.html
Iv used similar and you don't need a brush and thats coming from someone that's used it
He didn't wash the first foot of the forward trailer, he only washed this half of the front of the second trailer, and he didn't wash the tractor at all....come on now.....
He left something for you LOL
*sigh* fine....get me down there and I"ll finish up for him.....
No worries mate
from top to bottom....
Believe me, it is easier to wash from the bottom up
And i need 1 hour and 15 min to clean my 21" lawnmower after moving )
В России до сих пор швабрами моют))
Такие крахоборы как ты моют
How to clean a truck quickly ... use lots of soap!
One litre is enough to wash 5 trucks.
Easywash Australia i did'nt expect a reply lol . That is very good , i think its the same sort of stuff we use at yard .
I've done this shit for a living it's sore on the neck and shoulders
It is not easy, however, with the foam system is easier and faster than with a broom, right?
Easywash Australia when I did this it was just a mild detergent soap that we had so we had to use the broom as well to get it clean plus the pressure washer we had was a piece of crap lol.but I like this system
Yes, while washing a truck's the pressure cleaner is number 1 of your tool.
With foam system we talking on pressure washer around 3000 - 4000 Psi
I think it'd be better if he started at the top. Just saying
We recommend washing from bottom up or side to side to remove one layer of dirt at a time.
Washing from top to bottom will accumulate the layers of dirt on top of each other, which will make it harder to remove all the dirt.
Si
Nice rig, wonder how the fm 540 goes pulling 2 trailers.
Not cleaning properly
Man wäscht grundsätzlich von oben nach unten..............
. Ótimo trabalho.
Nice job.
Att. Brasil
ala
He missed the top...
LOL
Where's his safety glasses but the hard hat is a good touch
i wear a helmet when washing trucks too. I do a better job than him with a bigger and stronger water pipe washer.
😘😍
somewhat illogical as the man washes the truck. Normal would be to start at the top and wash down. So he has to do the work twice. The same is when you soak the truck with foam, always from top to bottom.
Nope - applying foam should be done from the bottom to the top - this way the foam always sits directly on the dirt - otherwise it would be applied on the pouring mixture of foam and dirt from the upper parts. And it is always visible which part has been already treated with foam.
But then you rinse from the top to the bottom.
Whats the helmet for😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
flood water
This truck was not washed long time. Watch the first part. In the place where there was soap, dirt is gone without problem. In a place where there was no soap, there is no possibility to wash. This It is Clearly visible
This video pissed me off so bad!!! If your getting paid to do a job, do it right!! Don't half ass it! On top of that, know the chemical your using and know how to use it properly. This guy definitely doesn't have a clue what he's doing.
What do you mean that he is doing wrong
Washed the wheels then dirty soap goes on them typical Australian bogan clueless .. costing the company time and money.
This is the wrong way to wash a truck
Actually the Snow foam system It is the best, the fastest and at the same time the cheapest way to wash a truck. 1L Easy Wash Soap washes 5 trucks, 15 min each truck
Easywash Australia you must wash it from down bellow because the dirt will not come back in this case
wow only washing parts shame
Моральное удовольствие))
fail
the trucks going to look like s*** when it dries
When it dries, truck looks as new, mate. Look next video ua-cam.com/video/20z-3nvUF1o/v-deo.html
Sauft der Typ???
What kind of soap do you use?