Instructions for Setting code or recombinating code for Kidde key box or otherwise known as Kidde key safe. These locks at one time were sold under the name Supra.
Much better than what they provide in the box. Be advised, this thing does not seem to care which order you enter them... So if you use it a lot, change the combo frequently because all you have to do is select the buttons that look worn.
Simple and you are a Life Saver~~I tried all day for about an hour to reset it...about 10 yrs old & forgot how to do it. Appreciate how easy you made it.
Definitely more helpful than the enclosed instructions. However, I wish you would've explained that the grey SCREWS are shaped like arrows. I had to use a magnifying glass to finally figure out what arrows you were talking about! But thanks - saved me a lot of time.
Thank you. What I figured out from the comments is that you can put the numbers in, in any order. So 1 2 3 4 can be unlocked w/ any combo of the numbers... 2314, 4321, and so on. This is fine by me, I just wasn't sure how that part worked. Thanks for the video!
Holy shit!! Thank you so much! I literally spent 45 minutes reading the directions and could not figure out that you had to turn ONLY the numbers for your code in the "set" direction to set it. I feel wicked dumb, but the directions are not clear. I thought to set the core you turn all the numbers in the set position, enter the code, and then turn "set" off. Like, I thought you turn the arrows one way to set the code and then when you are finished turn them to "set off."
Thank you for this video! Echo what Judi said below: the "arrows" on each little grey screw are practically invisible. Hold in strong light to see them.
Thank you for this! The paperwork misplaced and we hadn't been able to meet up with the person who knew how to change it. We finally found them but looked way involved so I pulled up reliable YT and here it is! The light in the room I was in I couldn't see the arrows so it wasn't working. Thanks to Judi's tip I went into better light and got it!
Thank you. I couldn't see the arrows at first. Do you think they could make them more less noticeable? I had to get my magnifying glass out to see them.
You are so accurate. I had to put a really bright light on the backside to discern that there actually were arrows! Otherwise With the unaided eye it looks like there are just ten flathead screwdriver indentations rather than arrows.
is there any way to open it if you turned the on screws in a vertical position rather than sideways? i had trouble seeing it when I set it and now it is locked and won't open. I've tried the method of hold down the open button and testing which give resistance but it doesn't help
Can it be 5 digits? Been on my moms house for 15 years and can’t get it off. She thought it was something but no combo of those work and now I read it doesn’t need to be in order, so I’m more confused.
I have same Kidde keyholder cannot see ''all the little arrows'' -- can see 2 arrows as shown in the film but WHERE EXACTLY ARE ''ALL THE LITTLE ARROWS'' showing which numbers are ''up'' and which numbers are ''down.'' VERY Confusing directions.
Thanks. Good video.👍 My observation: with this lock if we set 1234 as password . Any combination of those four numbers will still open. For example 3241 , 2314 , 4321 and so on.. will still work. 👍
Can hear his description of up and down arrows but the video is not at all clear in showing which numbers are ''up'' and which are ''down.'' VERY CONFUSING. I have the same KIdde keyholder, cannot see which numbers are up and which are down.
the arrows was very very difficult to see. You have to take a double take, because it's so faint. Kidde needs to make it more visible. Very good tip of putting back the key back into the slot.
the stock directions on this product arent the best. just watch this video up til the 2:10 mark, and you should be able to have figure it out. 2min video>vague stock instructions.
Yeah once upon a time I remember reading the instructions I think I had been a locksmith for about 6 months and I just kind of laughed and I thought to myself somebody needs to do a video and then finally one day I wasn't doing anything so I figured I would make some lives easier. Thanks for watching
Much better than what they provide in the box. Be advised, this thing does not seem to care which order you enter them... So if you use it a lot, change the combo frequently because all you have to do is select the buttons that look worn.
Simple and you are a Life Saver~~I tried all day for about an hour to reset it...about 10 yrs old & forgot how to do it. Appreciate how easy you made it.
Definitely more helpful than the enclosed instructions. However, I wish you would've explained that the grey SCREWS are shaped like arrows. I had to use a magnifying glass to finally figure out what arrows you were talking about! But thanks - saved me a lot of time.
best comment...can't see the arrows but after this comment put a flashlight on it and then it made sense
Thank you so much for this comment! I had no idea what he meant by arrows. I also used a flashlight and then I saw them
Thank you. What I figured out from the comments is that you can put the numbers in, in any order. So 1 2 3 4 can be unlocked w/ any combo of the numbers... 2314, 4321, and so on. This is fine by me, I just wasn't sure how that part worked. Thanks for the video!
Thank you! Former homeowner left no instructions. I would have never figured this out.
Thank you! VERY HELPFUL. My boss told me to reset my code then walked away and left. I had zero idea how to do this.
Thank you! I never would have figured that out from the directions.
Holy shit!! Thank you so much! I literally spent 45 minutes reading the directions and could not figure out that you had to turn ONLY the numbers for your code in the "set" direction to set it. I feel wicked dumb, but the directions are not clear. I thought to set the core you turn all the numbers in the set position, enter the code, and then turn "set" off. Like, I thought you turn the arrows one way to set the code and then when you are finished turn them to "set off."
Wicked dumb? Under 20 years old I guess.
Thank you for this video! Echo what Judi said below: the "arrows" on each little grey screw are practically invisible. Hold in strong light to see them.
My name is Echo from Minnesota
Thank you so much!!!!!!! The directions that came with the keybox were worthless. This video solved my issues with trying to set it.
Thank you! The key is the "arrows". I was not realizing that at first. I almost had to throw it but thanks to you- I can keep it. Thank you again!
Thank you. You are a life saver. The directions were complicated. Why do they make the arrows back on gray? So hard to see direction.
You are my new hero and save to me hours of old lady frustration thank you
Thanks for the guide! just found one of those today in a junk store !
Thank you for this! The paperwork misplaced and we hadn't been able to meet up with the person who knew how to change it. We finally found them but looked way involved so I pulled up reliable YT and here it is! The light in the room I was in I couldn't see the arrows so it wasn't working. Thanks to Judi's tip I went into better light and got it!
This helped me and my friend so much. We were struggle bussing
Thank you! Same here the directions that came with it were confusing for me, the video is great!
this was a much better explanation than the directions. thanks!
this is fabulous!! How do I get the key safe to unlock its loop on the top? I can' get the safe open but can't get it to release the loop on the top.
I got it thank you man! Arrows all need to be to be up first!
Thank you. That helped so much. No instructions in package.
Thank you. I couldn't see the arrows at first. Do you think they could make them more less noticeable? I had to get my magnifying glass out to see them.
Thank you! The directions that came with the product made no sense. Your video helped me a lot.
Thanks for the tutorial. You know I'm checking to see if 'combinate' or 'recombinate' are words, right? I don't think they are words.
Thank you! Instructions that came with it were useless!
Yes!!! I have been watching videos for the last hour and yours is the one that finally helped me! Thank you so much!!!!!!!!!
You're very welcome also you can try the same combination backwards forward just as long as all the same numbers are there it'll open it
Be advised the arrows are lightly embossed into the plastic. I needed to see them with magnification they are SO SUBTLE.
You are so accurate. I had to put a really bright light on the backside to discern that there actually were arrows! Otherwise With the unaided eye it looks like there are just ten flathead screwdriver indentations rather than arrows.
Thanks for the great and quick Tutorial!
Thanks from Australia... you saved my life
is there any way to open it if you turned the on screws in a vertical position rather than sideways? i had trouble seeing it when I set it and now it is locked and won't open. I've tried the method of hold down the open button and testing which give resistance but it doesn't help
Thank you! I was so frustrated and then I saw the arrows🧐🤯 I was like they are all pointed in the same direction! 🥶
Nice, easy-to-follow instruction. No need to read Kidde’s hecho en China multi-language ( unclear ) step-by-step “destructions”.😂
bless you. so much clearer than the directions
Can it be 5 digits? Been on my moms house for 15 years and can’t get it off. She thought it was something but no combo of those work and now I read it doesn’t need to be in order, so I’m more confused.
I have same Kidde keyholder cannot see ''all the little arrows'' -- can see 2 arrows as shown in the film but WHERE EXACTLY ARE ''ALL THE LITTLE ARROWS'' showing which numbers are ''up'' and which numbers are ''down.'' VERY Confusing directions.
Thank you !!! So simple...written directions lacking !
Hmm thanks will try again can’t see arrows.. 🙏🔑
Thank you!! You made it so easy...truly appreciate it!
Thanks. Good video.👍
My observation: with this lock if we set 1234 as password . Any combination of those four numbers will still open.
For example 3241 , 2314 , 4321 and so on.. will still work. 👍
I love u. You saved my sanity... such that it is!
1st video that made perfect sense! Thank you!
This is an excellent instructional video, very clear.
Can hear his description of up and down arrows but the video is not at all clear in showing which numbers are ''up'' and which are ''down.'' VERY CONFUSING. I have the same KIdde keyholder, cannot see which numbers are up and which are down.
Well explained. Thank you so much
Excellent information. Works well.
Dude, you are a saint.
Very helpful video. Thank you!
the arrows was very very difficult to see. You have to take a double take, because it's so faint. Kidde needs to make it more visible. Very good tip of putting back the key back into the slot.
Thank you! I had to get a magnifying glass out to find them. I thought I was losing my mind! Arrows! HAH!
So the numerical code works in any combination?
TY! Great vid. Saved me frustration
Thank you better then provided instructions
Extremely helpful- thanks
short and to the point thx!
Yes, ! We successfully reprogrammed the code for this old, simple lockbox that came with our house. Maybe we won’t upgrade to a techy lock
7/13/18
I’m finding out now, that you can set a code and it will unlock in any order you press those buttons. This is not a good one to have.
I have the same problem. Have you found a better option?
Still too many options for someone to guess
Great tutorial 🦋🦋🦋🦋Thankyou
Thank you! Narc ex had the old number. Not anymore!
Thank you for this video
Thanks you were a big help😀
Thanks For the info
thanks for the help
Thanks so much. A real help.
Thank you!
I can't see the arrows
Excellent thank u sooooo much
Bingo
You open the top lock
Mine wont even fit back into the box after being taken off.
You have to enter the code again and depress the release to insert the cover back on the box.
Thanks!
Awesome...it worked....thanks!
Thank you sooooo much!!
Thank you!!!
Thank you
Thanks !!
Thank you so much!
Thanks
Great video...really helpful. The instructions that come with the box are not helpful at all.
the stock directions on this product arent the best. just watch this video up til the 2:10 mark, and you should be able to have figure it out. 2min video>vague stock instructions.
Sorry I own a locksmith company and I train people how to become locksmiths and sometimes I get a little blabby. lol
😮
Video helped because the directions made no sense
Thanks for the positive feedback my friend
thanks
Camera is too far away
Directions that came with it are horrible, thanks
Yeah once upon a time I remember reading the instructions I think I had been a locksmith for about 6 months and I just kind of laughed and I thought to myself somebody needs to do a video and then finally one day I wasn't doing anything so I figured I would make some lives easier. Thanks for watching
This product is garbage
Thank you!
Thank you
Thank you!!!
Thank you!
Thank you!
Thank you!
Thank you!!