Moog Source For Sale (by synthpro)
Вставка
- Опубліковано 1 лис 2020
- Hey Guys,
This is a video I have made going over a moog source that is for sale by Bailey Brothers Music Co. I repaired this unit for them to get it back into fully working order so whoever buys this synth will be happy with reliability.
Here is the info to contact Bailey Brothers Music Co for those interested:
www.baileybrothers.com/locati...
(NOTE: this unit does not have MIDI, the Cassette interface is a Din connector like used for MIDI but it is not wired as such)
If the purchaser of this unit would like it upgraded with the later inputs/outputs, I do offer installation of those additional upgrades. this upgrade also includes DIN Sync drum interface like found on Roland equipment.
Thanks for watching,
Sincerely,
Jareth
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
man that thing has some serious battle scars! Bought mine back in 1982 , still have it
@14:24 ah yes, that familiar steam locomotive cycling white noise of the dreaded MM5837. Brings back memories of my Realistic/Moog MG-1.
Everything else sounds fantastic. I think that the Moog Source might be the only Moog that comes very close to a Minimoog D in terms of fat sounds! Thanks for sharing.
You are correct. Moog used that noise source in many of their synths including the Memorymoog. There is a different chip used in the some moog which didn't have that reset. I'm tempted to build a replacement discrete noise source that plugs in place of the chip.
Thanks Alain🙂
Sounds wonderful, nice work! I never realized TRS stood for tip, ring, sleeve, so glad you mentioned that.
Thank you very much!! I'm happy my video helped with the TRS term...just to add to this TRS is also referred to as stereo in some cases and then you have TS, (Tip, Sleeve) which is mono.
Thanks for watching.
Wow, that parameter knob has some fine grain control. Unique design.
It's a very interesting design for sure. This uses an optical encoding design where there is actually a clear disc with stripes and two different optical sensors which picks up the phase differences of the encoder. It was fairly advance for the time.
Nice
Thank you!
Nice!!
Great patches! Would love a Source
Thank you very much! They are very neat little synths for sure.
Great job - sounds great. Very realistic passing train noise ;-)
Fantastic patches Jareth!
Thank you very much!
Huge bass !!!
I love these synths so much. So underrated and very funky machines. I have a late one.
I’ve never had any luck with the cv. Interesting you mention the trs. Any way I can get my Arturia keystep pro which has eurorack mini jacks to work with it? They’re mono jacks but the Moog uses stereo as you pointed out. I would love to be integrate this with the rest of my set up. Thanks
Hey Dan,
Does the keystep send CV? Not familiar with modern controllers. If it does send CV what you can do is get a cable that goes from TRS to two TS splits, (this would typically be a Left/Right channel split cable from a TRS) one of the splits would be CV in and the other will be CV out.
In order to make a keystep pro to work, you would need to use this cable and add a 10k pot in series(carbon track from keystep and wiper to source).
You would hit the lowest note on the keystep and hit the same note reference on the moog source and then use the sources fine tune knob to match frequency reference.
Then hit highest note on the keystep and use the added 10k pot for correct frequency from the source.
Repeate these last two steps until you have perfect tracking of frequency.
(NOTE: for best results, use only oscillator 1 during this process)
If this doesn't track correctly in this configuration, you may either have the wrong V/Oct from the keystep or it may require a extra circuit.
Hope this helps.
@@synthpro thanks so much for your response. Yes the Keystep sends out cv and gate via mini jack. These use ts jacks, so I would need to get ts to trs? Thanks again. I love all your videos.
Best wishes from across the pond.
@@theoriginaldanalogue Your welcome. You are correct, if you had to you can get a mini TRS to mini TS split and then use a converter from mini TRS to 1/4" TRS like what most headphones require.
@@synthpro yes the Keystep Pro does send CV on 3.5mm mini plugs....... i have one, and a Beatstep Pro.......
do you do the CV mods for Prodigy's ?????
my Prodigy is a very low serial number and no i/o(cv/vtrig/strig/etc)..... we can go over this when i call yall on Monday Feb20 2021.
my Brother who gave me my Prodigy may be interested in this...... is it still available ????? he works for Alpha Insurance and drives to Alabama often for meetings !!!!!!
You will have to check with Bailey Bro's Music Co. To see if it's still available, I just serviced it and shipped it back to them.
Awesome video! Would love to pick it up if I wasn't so broke, always thought the source was real neat!
Was also just wondering if you were based in Bama since you were doing work for Bailey Brothers. I'm in Bham myself.
Thank you! They are very cool little synths for sure. I am located in Ft Payne so not far from Bham at all.
Love my Source too -- such an elegant sound. And that bottom end... :) I've had a VCF and VCO2 cv input mod added to mine for additional fun. Quick Q: Are the click switches under the membrane a mod from you?
I always enjoy working on Sources. That interface is actually made by Synhouse, highly recommend these panels.
@@synthpro great tip thanks!
Has this sold now?
is your patches for sale?
Hey @synthpro been trying to get in contact with you to get my mini moog restored
Wow I have never seen a MOOG so scratched and with such horrid wood sides! I hope that is counted in the price reduction.
I have one worse than this one. I'm not the one pricing this unit but I'm sure that will be taken into consideration by the seller.
I'd rather buy one with battle scars then pristine.
It's a musical tool, not a museum piece. Yet