Teaching a Newbie How to Forge Weld
Вставка
- Опубліковано 24 гру 2021
- Roy teaches Thomas how to forge weld. Lots of great tips on forge welding technique.
Join this channel to get access to perks:
/ @christcenteredironworks
--------------------------------------------------------------
Want more Christ Centered Ironworks?
--------------------------------------------------------------
Want to SUPPORT what we do here at Christ Centered Ironworks Blacksmith Channel?
Visit my channel: / christcenteredironworks
Stop by my website: www.blacksmithpdfs.com
Get some merch: teespring.com/stores/christ-c...
Shop my Amazon Influencer page for shop tools: www.amazon.com/shop/christcen...
Social: / christcenteredironworks - Навчання та стиль
I count my blessings being able to work with such an amazing blacksmith thank you so much Roy and all the knowledge you are willing to give
No.... I'm not green w the nasty E word! I'm just a grench, hahahaha. Lol JK
Thomas it's really super kuul you get to work with and learn from a fine Smith and a great man! Believe you me if I could I'd be there at your side soaking up as much as I could! Roy has the heart of a teacher and is really fun to hang out with and learn from
Hope your Christmas was eggselent! Happy New Year!
Crawford out 🙏🔥⚒️🧙🏼♂️
Good job, Thomas!
Thank you guys
Great explanation of some necessary fundamental skills that are often skipped over. Inspiring content, thanks.
Thanks for the no flux forge weld tutorial! This was great.
Probably the best welding video I’ve seen. Very well explained
I'm glad you enjoyed it 🙂
Good job Thomas, my welds still don't stick yet and I've tried at least a half dozen times, you nailed it first try on camera 👍
It took me several tries teaching myself.
This is the best explanation & demo I've seen on forge welding, well done Sir thanks for posting.
Probably THE most frustrating blacksmithing process. I have found it reassuring watching outtakes from John's (Black Bear Forge) forge welding videos where they don't take and he has pieces flying everywhere. I have at times gotten so fed up and just mig welded the piece. That said every bit of information is greatly appreciated. Thank you for sharing, Roy.
Merry Christmas, and a Happy New Year to you and all the subscribers.
The magical forge-weld never gets old
Amen to that 🙂
Sweet job T!
Thank you for showing this. I have not sought out a teacher and this shows me alot.
The first successful forge weld is always memorable and fun. Thank you both for sharing. Merry Christmas to you all.
Great video my first weld and 2nd and 3rd still ant stuck
Thank you for the detail in this process and thank you for all you do!
Thank you for watching
Really happy you can give Thomas such excellent 1st hand knowledge.
That play list is going to see more traffic now!
It's not easy on your own to get this as w a great teacher!
God bless now and happy New Year!
Crawford out 🙏🔥⚒️🧙🏼♂️
Thanks Roy, all info helps!
Merry Christmas and here's to a happy new year ahead of you both. Very nice video this week Roy. Tom awesome job. Can't wait to see more videos like this and all other videos. Both of y'all Keep up the great craftsmanship and hard work my friends forge on. Keep making. God bless.
This was extremely helpful to me, thank you. Exactly what I needed to see
I got a new anvil today. No more of that 15 pound cast iron harbor freight ASO. Merry Christmas.
Congratulations! A real anvil truely boost confidence perhaps moreso than the actual benefits, which are real
Happy New Year
Crawford out 🙏🔥⚒️🧙🏼♂️
Congratulations I'm sure you will love it!
@@dragonstonegemironworkscra4740 You know one of my favorite youtubers is named Jackson Crawford so I like your name.
@@mtn.homeforge351 Love it already, thanks.
Awesome simple break down of the process, Thanks Roy
Hey Roy, this is incredibly timely. I actually just did my first forge weld yesterday, also without flux on a piece of 3/8 round bar folded back on itself. I managed to get it to weld, but I'm sure it was dumb luck as I didn't really know what I was doing. On a related note, I just realized in this video that I have the same coal forge you were using and I noticed that Thomas increased/decreased the air without cranking the blower in the video. Would you mind sharing what you did for air induction down underneath the forge? Merry Christmas Roy and thanks!
Nice one you guys, like the tutorial😊
Roy this is great info. Tomorrow I am going to go try this with two square bars. Thanks for this information
Can you demonstrate the same in a propane forge?
I love the "hands on" learning without hocus pocus!
Glad you enjoyed the video
Many thanks on this very educational video Roy. As I've said in the recent past, I'm just now starting up with forging and blacksmithing and I haven't yet tried my first forge weld. Right now I've got a little propane powered forge that I use and I'm just hoping that I can get it up to a proper welding heat. It will sure cook the steel hot but I'm just not sure it will be hot enough. I'll sure give it a try though as I want to learn how to forge weld. I believe it will come in very handy in the future.
Great comment on camera fire brightness. I've had this issue myself and when the camera zooms back and forth, the steel billet can look either too hot or not hot enough. Merry Christmas! Good vid.
Lot of folk don't understand, even thought that is welded it is still just like a cold shut with that split coming to it.
Hi roy I really enjoyed the video and the information you provided i was wondering if you would be able to provide a more in-depth insight into the use of coke in the forge as im having a hard time with finding a lot of information on its use in blacksmithing and how much difference there is between using lump wood charcoal , coal and coke and the ways that they differ eg constant air flow or different forge set up to use do they perform similar or not will you be more likely to make more mistakes more quickly in one or the other with Heating will this save some money in the long run if i use a longer burning fule are they put out the same way or do they all have a different way of dousing the fire any help at figuring this out would be greatly appreciated thank you
I have a problem that I don't know how to solve. I use a coal forge and because of this I can’t properly monitor the temperature of the workpiece, because it is in the coals. When I want to do forge welding, my workpiece either melts into liquid metal or I don’t heat it enough and it oxidizes.
If you have a 15mm thick by 40mm wide peice of bar can you forge weld the two 15mn sides together or does it need to be the 40mm sides I'm going to also try to slit a hole through it for an leg vice mounting bracket the part that bolts to the post and pins through it to mount the vice would this be strong enough for the job I'll be using it for it will be all done by hand
Thank you Roy. When forge welding do you wear any eye shading? The white hot metal seems to hurt my eyes like actual welding.
Bituminous coal is a lot more available than coke and and is harder to use. It would be nice if you did some demonstrations using Bituminous coal.
I've tried to forge weld a few times and failed.. of course I use a gas forge and imagine it's easier with a coal forge, but I'm gonna watch this video again tomorrow and give it a shot again and hopefully I'll have a forge weld lol
It's funny the ad before the vid was for boric acid lol have you got secret sponsors
Bright yellow to incandescent white, okay, that's in an enclosed area with artificial lights, what's that look like in broad daylight?
i suspect whoever taught you that molten steel is ejected from too strong a hammer blow while first setting forge welds was mistaken. mild steel melts at about 2700 °F. i suspect it has more to do with lack of sufficient diffusion to reduce grain boundaries between the two planes of the separate bars between subsequent blows. too hard a blow, and you're undoing all the forge welding you did on the prior strike. what do you think?
So, burnt steel means you're to low in the fire, or, a tunnel in the coke letting air to the stock👍🤔
Your welcome.
Hi guys the tutorial is nickel
It still aggravates me that I can weld in a coal forge, even trying to break the weld by chiseling it apart. But it's 50/50 in my gas forge.
I'll try and get a welding video in a gas forge soon 😊
Try Iron Mountain Flux
When he went for the first/tack weld there was a loud pop from the steel or anvil. If you know can you elaborate as to what caused that loud pop? The reason I ask I was building my 2nd damascus billet not very long ago and when I went to set my billet it to popped loudly like a gunshot had gone off an I may have been better off wearing my brown pants that day lol. Also it didn't happen on the first billet I built and so I was curious why it would happen sometimes but not every time. Thanks for the advice if you can provide it and happy holidays. Thanks for sharing your knowledge with the rest of us I know I appreciate it.
Scale popping off. You want fun throw some water on the anvil before forging on it.
Learning is fun. 3rd.
First
Newbie sounds wrong, Ain't we a BlackSmith community
Quote : "teaching a member of the blacksmith community how to forge weld " = 150 views and nobody else gets to see it.... "Teaching a newbie how to forge weld" = 2500 views And everyone gets to see it... Simple math unfortunately determined by UA-cam...
Release 5 days not such a fan base
Not sure what your on about but okay 👍 hope you have a happy New year none the less...
But I am a newbie when it comes to forge welding
@@johnjude2685 "not much of a fan base" says the man with seven subscribers