From Jharkhand , facing the same issue on my new 4v, Just got my first service done a few days ago, the problems seems to be still there, please keep us updated if you find a solution
I changed my xpulse 200 4v before registration . Had some noise and vibration issues while deaccelerating at 3000 and 4000 rpm. Now having jerk issues in 2 nd gear and cold start issues and rpm not stable that time.
@Bhasker Beniwal Bro any update/improvement after the 1st service? Did the problem vanish? I also have the same bike and same issue. I really want to get rid of this issue.
Same problem i also issue or hero showroom per check karvaya to vo bole ki sabhi hero ki big bikes me ata hai ye jerks..very irritating when riding in slow speed 😔
Bhai... the sad part is that Hero has not disseminated the skills to the dealership or their Technical staff... They do not know how to isolate a problem, cite ECU for everything... even a small problem they will replace components... leading to a mess. I am facing this issue with idling. One thing that I would like to advise you is not to fill petrol to the full. There is a lot of circuitry/components that try to absorb the spillage into the engine system. This can also cause the jerks that you are experiencing. Under the tank there are two tubes, one is thick and the is thin... Pls disconnect the thin tube and check if it improves. Good luck to you...
First I thought this is simple problem caused by water in petrol tank and since it's rainy season quite possible also but after going through the comment box seems like tuning issue which can only be resolved after ECU update. Meanwhile keep us updating.
I got a used Xpulse 200T BS6 at a good price. The issue i am facing is lot of noise from the engine and also chain noise is there. Bike is struggling to go beyond 70-80, i need to push it really hard to gain that speed. I gave it for service and they told you need to change clutch plate and cable. but still facing issue in achieving speeds. bike is good to drive in 60kmph, but anything above that there is lot of vibration and noise and bike is struggling. Dono what is wrong with the bike. :\
I logged a complaint about this problem, Company replied to this is in coming days there going to be ecu update , company has rectified, And In final phase, Communicated by regional sales and service manager
Hi. Im from Mumbai. Im experiencing RPM fluctuations on my new xpulse. Service center is adamant that there is no issue. If any one know the solution, please share it will be great help.
Same. That too after cold start, like starting after office when bike is cooled down for over 5-6 hours. At low RPM's it fluctuates like if fuel is empty
Brother mera xplue kuch alag behave kr raha h , 70 iaa 70 se jyada k speeed me chlane se bike apne aap band pr jata , full tank hone k bad v band par raha hain
Bhai pehle kuch KM toh chala lo atleast 1,2 nd servicing kar lo aur tab experience share karo , ye v yad rakho ye hero hein Yamaha nehi..Mera 4V abtak 10K KM chal suka hein November 2021 se. Pehle mera v aisa thora thora problems aya tha . Proper time mein servicing karo sab thik ho jayega
Nope they will not change the bike... And there is no solution to this problem till now let's see if they are going to give some solution in coming months...
Bhai ye issue mera bhi aa raha hai console laga ke software bhi update kar li bike but same issue hai bike lete wakt kuch nahi tha but 200km hone ke baad issue dene laga😭😭😭😭😭
Hey Bhaskar brother, It is a very new bike and give it some time to run on offroad and onroad. 4v owners are lucky than debut bikes in 2019. You have got already a much more refined machine which has a greater mileage and tuning (I have tried one from friend). So this tag "Before buying " is simply unreasonable and anti sentiment. Just take care of it and use proper services along with recommended engine oil. Dont push it to above 10W30. Use of plenty fog lights and leds will harm your bike in many terms. Thank you in advance.
Hii Pabitra brother, The problem is actually very irritating and many of my friends also got 4v's which doesn't have this issue... This video I made to warn those who are going to buy this machine so that they will get a problem free bike because I tested many other 4v's available at showroom and some of them don't have this issue... And about my bike brother one of the engineer from the hero have tested my bike and agreed that there is a problem... So I think sharing my experience is not unreasonable if it's going to save time and money for many buyers... Don't take it otherwise bro but I know what issue I am facing and how irritating it is to ride like it... And Thanks for the advice I'll definitely follow this 👍🙂
@@rishisyt486 Hero should call back bikes which have same problem or send technical order to the services to recover the problem...Regards from Türkiye...
Dear bhaskar , you should check your fuel injector along with the air filter and accelerator wire . As you mentioned this happen only at low rpm ...hope it will fix your issues
Nothing just wait for the Hero to give update on this thing asap... Till then happy riding and I think its not going to be a big issue cause of this... fingers crossed 🤞 🙏
@@BhaskerBeniwal today also I givey bike to showroom for this issue...but they said everything fine...they just remove carbon content somewhere and return my bike ...it's worst experience in hero......i m facing this issue after my first service only....so i gonna to remove this oil ..and put synthetic oil instead
Xplulse rally edition 4v bike. It was perfectly fine till first servicing. I have done only 870kms om this bike and always filled speed petrol. After first servicing and software update its giving the jerking issue between 25kmph and 50kmph...mainly on third gear.im from Mumbai.
Yes they will say this... Ek kaam Karo unhe peeche baithao and aap chalao and phir unhe batao k ye dekho ye hai issue kyuki most the people uss acceleration par nahi chalate jis par ye problem dikh rahi hai... Wo jiski bike hai wo he samja sakta hai...
From Jharkhand , facing the same issue on my new 4v, Just got my first service done a few days ago, the problems seems to be still there, please keep us updated if you find a solution
ua-cam.com/video/d4qu7Z_AsKU/v-deo.html
Hello I am from Karnataka, i am also facing this problem,
My advice is to replace spark plug and check the ignition coil
Your problem solved after this???
@@BhaskerBeniwal waiting for the spares
Brooo Nanu tagolbekantha iddini henge takolbahuda
@@datts777 Please reply is your issue resolved by Hero service
Very first day i faced jerk issue.. Disappointed a lot
I changed my xpulse 200 4v before registration . Had some noise and vibration issues while deaccelerating at 3000 and 4000 rpm. Now having jerk issues in 2 nd gear and cold start issues and rpm not stable that time.
@Bhasker Beniwal Bro any update/improvement after the 1st service? Did the problem vanish?
I also have the same bike and same issue. I really want to get rid of this issue.
Low end fuel tuning is not so good, when the bike is new it's so smooth but you loose that after the first service
Same problem i also issue or hero showroom per check karvaya to vo bole ki sabhi hero ki big bikes me ata hai ye jerks..very irritating when riding in slow speed 😔
Go to hero service center and ask them to reduce the play of accelerator cable
Ekbar spark plug bhi check karwao there might be minor crack
i also face that on constant speed the bike jerks a bit . but the service centre person said on his test ride that there's no problem.
Bro that is not normal and there is a problem... Service guy will give you these excuses because they don't how to solve this issue...
Hang on for 3-4 days I'll post a detailed video about the issue got solved or not after 1st service...
Bhai... the sad part is that Hero has not disseminated the skills to the dealership or their Technical staff... They do not know how to isolate a problem, cite ECU for everything... even a small problem they will replace components... leading to a mess. I am facing this issue with idling. One thing that I would like to advise you is not to fill petrol to the full. There is a lot of circuitry/components that try to absorb the spillage into the engine system. This can also cause the jerks that you are experiencing. Under the tank there are two tubes, one is thick and the is thin... Pls disconnect the thin tube and check if it improves. Good luck to you...
First I thought this is simple problem caused by water in petrol tank and since it's rainy season quite possible also but after going through the comment box seems like tuning issue which can only be resolved after ECU update. Meanwhile keep us updating.
Sure Bro
Bhai City Mileage Bhi Sabko 37-40 mil rhi hai par mujhe 28-30 mil rhi hai kya issue ho skta hai? Aur main agressive bhi nahi chalata
I got a used Xpulse 200T BS6 at a good price.
The issue i am facing is lot of noise from the engine and also chain noise is there.
Bike is struggling to go beyond 70-80, i need to push it really hard to gain that speed.
I gave it for service and they told you need to change clutch plate and cable. but still facing issue in achieving speeds.
bike is good to drive in 60kmph, but anything above that there is lot of vibration and noise and bike is struggling.
Dono what is wrong with the bike. :\
I logged a complaint about this problem,
Company replied to this is in coming days there going to be ecu update , company has rectified,
And In final phase,
Communicated by regional sales and service manager
Hi. Im from Mumbai. Im experiencing RPM fluctuations on my new xpulse. Service center is adamant that there is no issue. If any one know the solution, please share it will be great help.
Same. That too after cold start, like starting after office when bike is cooled down for over 5-6 hours. At low RPM's it fluctuates like if fuel is empty
From Assam I have this problem in my xpulse 4v no solution found yet.
I am facing same issue in my new xpulse. So I have found the issue with spark plug. I have changed the spark plug and now Jerk issue is solved....
Brother mera xplue kuch alag behave kr raha h , 70 iaa 70 se jyada k speeed me chlane se bike apne aap band pr jata , full tank hone k bad v band par raha hain
Yes Bhai meri 8 days old bike hai and lene ke 2nd 3rd day se same to same jaisi aapki h waisi hi meri h
Bhai sensors may not be working properly as fi system is dependent upon sensors
Don't start the bike on side stand, and hold the throttle for 2 mins at 2k rpm after starting. The issue is only on cold start
Bhai pehle kuch KM toh chala lo atleast 1,2 nd servicing kar lo aur tab experience share karo , ye v yad rakho ye hero hein Yamaha nehi..Mera 4V abtak 10K KM chal suka hein November 2021 se. Pehle mera v aisa thora thora problems aya tha . Proper time mein servicing karo sab thik ho jayega
Bro 2800 KMS do ne till now and problem is still there... Bro ye problem bahot saare 4v mai hai and engineer ko check karaya wo bhi yahi bola...
Hy brother, I've got the same issue on my 4v but i haven't got my no. Plates yet so would they fix my problem or my bike?
Nope they will not change the bike... And there is no solution to this problem till now let's see if they are going to give some solution in coming months...
Did you went to consumer court ?
Same problem I'm also facing bro, service manager told that, this due to high torque. Even I'm also not getting what to do!
Wait for the update... stay tuned...
Bhai ye issue mera bhi aa raha hai console laga ke software bhi update kar li bike but same issue hai bike lete wakt kuch nahi tha but 200km hone ke baad issue dene laga😭😭😭😭😭
Hey Bhaskar brother, It is a very new bike and give it some time to run on offroad and onroad. 4v owners are lucky than debut bikes in 2019. You have got already a much more refined machine which has a greater mileage and tuning (I have tried one from friend). So this tag "Before buying " is simply unreasonable and anti sentiment. Just take care of it and use proper services along with recommended engine oil. Dont push it to above 10W30. Use of plenty fog lights and leds will harm your bike in many terms. Thank you in advance.
Hii Pabitra brother, The problem is actually very irritating and many of my friends also got 4v's which doesn't have this issue... This video I made to warn those who are going to buy this machine so that they will get a problem free bike because I tested many other 4v's available at showroom and some of them don't have this issue... And about my bike brother one of the engineer from the hero have tested my bike and agreed that there is a problem... So I think sharing my experience is not unreasonable if it's going to save time and money for many buyers... Don't take it otherwise bro but I know what issue I am facing and how irritating it is to ride like it... And Thanks for the advice I'll definitely follow this 👍🙂
I am facing the same problem hero service has no solution for it. Only users can relate the problem.
@@rishisyt486 Hero should call back bikes which have same problem or send technical order to the services to recover the problem...Regards from Türkiye...
I too facing same issue, for me they replaced idling valve, but that couldn't resolve the issue.
Bro do u own this bike? Very irritating problems people are facing. Don't just give ur Gyan
Bhai i have taken 4v and same jerk problem is there ...apka solve hua ab tak jerk problem..
Bro I am on it let's hope for the best and as soon as I get any new update I'll update here on my channel 🙂
only 130klms run so far . bought in June 2022
Change the exhaust the problem is faced by catalytic converter trust me
Dear bhaskar , you should check your fuel injector along with the air filter and accelerator wire . As you mentioned this happen only at low rpm ...hope it will fix your issues
There is same problem in bike also... I think it's there in all 4v bikes... So company has to resolve this issue
Same with Honda unicorn bs6
i think this issue is because of FI Fuel Pump issue.
vai one u use Liquid Molly Fuel System cleaner
After stand bike is starting
Same problem to my xpulse 200T bs6. Very bad.
Did you get any solution from service center?
Fuel pump issue
Jerk problem sabhi xpulse 200 4v bike peh sayad
Koi solution mile to please bata dena ....mera bhi same problem......
For sure Bro...👍
Solve hua kya issue
Bhai mere bike me v yahi problem hai
Company fault he meri bike me bhi same problem hai
I am facing th same problem bro Hero service has no solution for it. I am from Assam.
Amar service centre burot goru bur puhi rakhise..ekue njne.. servicing t mur khn dhnkho he krile..solabole bht akhanti,ser seroni sound.. jerking,over heating
Hero konto service centre?
Fule pump problem bhai mere me bhi aayi ye problem
Mera bhi same problem
From Nepal
Same problem what to do
Nothing just wait for the Hero to give update on this thing asap... Till then happy riding and I think its not going to be a big issue cause of this... fingers crossed 🤞 🙏
Aapki bike m koi problum h isko check krwao acche s
Bro check Kara Li maine 2 baar service centre mai kuch samaj nahi aata unhe
Service ho gyi kya iski 1st
@@mrkvlogsmotox Nahi bro aaj hai iski 1st service
Ha service krwane k bad nahi aani chaiye ye problem
@@BhaskerBeniwal Any update/improvement after the 1st service? Did the problem vanish?
From tamilnadu 🤷🏻♂️ facing same jerking issues in low rom
Bro it's very irritating I just got my 1st service done now let's see if the issue is still there or not...
@@BhaskerBeniwal today also I givey bike to showroom for this issue...but they said everything fine...they just remove carbon content somewhere and return my bike ...it's worst experience in hero......i m facing this issue after my first service only....so i gonna to remove this oil ..and put synthetic oil instead
@@giriramdsk7271 Bro in 4v Hero is already using synthetic oil and I don't think that is going to end this issue...
@@BhaskerBeniwal i m tried that oil ,in last one week..... engine smoothness increase..but still that jerk issue there
Mere pass esa koi issue nahi aata esa
Meri bike yahe problem hai
Xplulse rally edition 4v bike.
It was perfectly fine till first servicing.
I have done only 870kms om this bike and always filled speed petrol.
After first servicing and software update its giving the jerking issue between 25kmph and 50kmph...mainly on third gear.im from Mumbai.
Mera bhi asa hota he bhai
Hero wants you to ride it fast....don't you get it XDXDXD
😂
Same problem bro
Service center par check karaya?
@@BhaskerBeniwalNo but I did ride my friends bike it was the same
Hero engine me hota hi hain yeh mere bhi hota hain
And yaha kuch respond hi nhi karre h bolre h sahi h sahi h
Yes they will say this... Ek kaam Karo unhe peeche baithao and aap chalao and phir unhe batao k ye dekho ye hai issue kyuki most the people uss acceleration par nahi chalate jis par ye problem dikh rahi hai... Wo jiski bike hai wo he samja sakta hai...
Bhai aap chup raho 2 min k liye tab to sunne ko mile kya sound aarha hai bike se 🤦🏻♂️
💯
Don't go on looks of this bike, it's a flop bike
Can anyone explain in English
Bro there is jerking problem in lower RPM in this motorcycle so just check every stock before buying new bike...
Choke wire
Hi Bhaskar,
Please open a whatsapp group and share a joining link when you post new video so that Xclan can ask their queries and get some solution.
Sure bro I'll do it in my next video👍
Yes