They’re nice and the price ain’t bad either! I do miss having glass on my kits to cover dust but it’s nice being able to have kits hang over sometimes like the Penelope or the meteor uni.
Wow, out of all the Gundam UA-camrs I've come across, you're the first I've seen to use decals and topcoat. It really shows that you're both a dedicated builder and a passionate hobbyist! Keep It up man!
Thank you for the kind words! I always try to finish my kits before putting them on my display shelves, but sometimes I run out of room in my work in progress closet so they'll be on the shelf while I wait to get to them.
Great tour! Nice idea to display real aircraft for sense of scale, I like to display rg pilot figures here and there for that, even unpainted they bring change 1/144 models impression.
I have one of those pilots on my OYW shelf but plan on spreading them out on the other shelves for frame of reference, especially on my late UC shelf where the kits get massive. I just need to find my pilot figures first lol. I've seen people paint those, it must take a LOT of patience to do so.
@@JoesGunplaGarage Yeah, it's really a miniature painting, suppose not any gunplay modellers have that skillset. I realise that my comment was an obvious one, but I rarely see this figures on the shelves on UA-cam, may be that's way there is none in newer RG sets
Thanks for sharing the madness Joe, lots of unfinished/pending projects you got there as I'd go crazy just trying to figure out which to tackle first 😂 My guess is you got 20 bootlegs. Awesome collection btw 😎
Thanks for watching! I wish I had more time to finish them all :( sadly the release schedule the past few months meant having to snap and build a kit, review it, then move to the next one very quickly. I'll finish the WiPs soon enough, fingers crossed lol.
that's annoying, I wonder what's causing it. My freedom isn't anywhere near a heat source or anything that would warp it like that, very disappointing. :(
I filmed this video twice. I forgot to get that in my second go (first round of footage got corrupted). I have my airbrush booth vent go through a hole in my floor and out next to the dryer vent. I replaced the plastic spray booth vent hose with regular dryer ducting and it worked perfectly. You didn’t miss it I’m just dumb and forgot it in my second round of filming.
Have you tried latex liquid mask? It's a lady product for beauty masks. You might like it and you can't beat the price. Plus you can let your gal use it too. POINTS!
Those chinese panel liners that you have, I have 4 of them and they work great. You need the main solvent for them though as its going to be the medium of that colored one. As in solvent first to the panel line then the actual colored panel liner
I use a tamiya dust brush. but its unpreventable with the kits out in the open like this sadly. I did look into adding plexiglass doors and walls to these shelves but it's quite expensive to do :(
It stresses me out too lol. This year was decently stacked for releases so a lot of the time I have to build, review and move right away to the next kit before decals and top coat to finish. I'll usually try to catch up 1 weekend a month and decal and top coat a bunch of kits but having 3 releases in December along with the holidays made it difficult. This gives Delpi and G Rework time to make a set of decals, I'm not opposed to making my own scheme or reusing decals from an adjacent kit but I like the added flare a specific decal set has for a kit.
haha that's an oldie! I built my first kit in 2000 with a no grade 1/144 wing but I've built models with my father most of my life so it's always something I've been into. 2010 Dynasty Warriors Gundam 3 releases and I got heavily back into the franchise after that collecting nearly all MSiA figures that I had when I was a kid. I wanted a Kshatriya to go along with the robot spirits unicorn and sinanju I got to fit in with my MSiA collection so this was technically the first Gunpla I built since 2000 and I got the Kshatriya in 2011. 2013 after building the RG Zeta I realized that NOTHING was to scale in my whole model collection so I sold my entire MSiA collection and switched to gunpla full time to start fresh. I painted the Kshatriya blue as a way to make a custom. These are water color paints I got from Michael's craft store lol, its very delicate, if I look at the kit it get's scratched. I retired the blue Kshatriya from my collection after I finished my resin build Kshatriya. Blue is very loose and floppy having been moved 5 times, it's not a very good build, even the sleeves markings where done with white out, not even paint. I came into this hobby from very very humble beginnings. Sorry if that was a bit long winded but it's really Blue that got me back full swing into this hobby of model making, so you pulled on my nostalgic heartstrings a bit haha.
@JoesGunplaGarage Wow those are awesome thank you! Love your collection btw. I also wanted to ask do you plan on making a video on your Top Coating process?
How long does it take you to dust is all? XD the majority of my collection is in detolfs so those are spares but dust is crazy in my house for those unworthy of the glass
I dusted every shelf before this video (except the WFM shelf) and it took me roughly 6 hours to remove all the kits, dust the kits, then the shelves. This happens about twice a year or in special occasions like this video lol.
@@JoesGunplaGarage i got the daban perf in my backlog too, im not paying those prices for a bandai one. Im stuck on doing leds or using that nice painted frame
Sadly I can't so it's a catch 22, this setup is nice for those bigger kits like the meteor and penelope so it can hang over the shelves if it needs to, but it means a whole day of going through with the dust brush and dusting everything every couple of months. I'd love an enclosed cabinet but those are very expensive now whereas these shelfs are relatively cheap by comparison.
That's officially how it's pronounced lol. I only pronounced it this way for the video as a bit of trivia, I've gone back to the American way of saying ver KAH in newer videos. I'm not sure why K A is the official pronunciation, it just is lol.
I melted my pg perfect strike helmet couple weeks ago lol... boiling helmet to close a gap ... didnt work, thankfully it comes with original sculpt too..
37:30 also the ver ka is short for version katoki, pronounced kah, like kah-toe-key, by pronouncing both letters separately you're insinuating its an acronym with each letter meaning something different
I have a tamiya dust brush, I'll go through a few times a year and dust the kits and I'll dust the shelves at least twice a year, it's a lot of upkeep for sure but full glass cabinets are a little pricey. I might add plexiglass doors and sides in the future to these but this'll do for now.
Fairly new to the hobby, but I only buy the kits that looks cool to me, be it main character or just grunts. Do you like the design of each and every mobile suit, or are you just trying to get them all, and have a complete set? I am curious, because kits like the heindree's and the lfrith thorn gave me buyers remorse as soon as I finished them. And most of the zeon mobile armors are just ugly imo.
My main basis for collecting is to collect 1 of every HGUC kit and any subline that comes out after. There's about 260 HG mainline kits and I'm only missing about 35 of them, a lot of the ones on my list are incredibly old so it'll be some time before I'm finished collecting. I was fortunate to collect HG WFM as the kits released so I didn't have to worry about trying to find kits that are out of print. Going forward I'll collect as kits are released, and being a youtube reviewer it's in my best interest to cover newer kits...even if I'm not savy on the design. I've seen all Gundam Media up to this point except for some obscure video game cutscenes so I'm pretty knowledgeable when it comes to lore and things like that, a lot of the times I'll be iffy on a design from it's release images but after I watch the show I'll have a better understanding and appreciation for the design, Turn A is a perfect example. I never cared for the design but after watching the series I liked it quite a bit more.
Apparently it isn’t. ua-cam.com/video/BjeoGx1GUoI/v-deo.html I’ll probably still call it ka over K A but figured I’d throw that into the video for a little bit of trivia.
In the west/English speaking areas it was erroneously pronounced “Kah,” but it has always been Ver “K A” or Ver “Katoki.” I still say it the wrong way since that is the common English parlance, but I acknowledge the proper way.
![Gunpla Tutorial: Fixing older Real Grades - Joint Strengthening guide - [4K]](http://i.ytimg.com/vi/ckVgK5VHUD0/mqdefault.jpg)
![Every 1/100 Gunpla in my backlog - MG, FM, RE/100, P-bandai overview - [4k]](http://i.ytimg.com/vi/NY7vXlo6kI0/mqdefault.jpg)
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
I saw your setup with those Ikea shelves and got a few of my own! It's a gamechanger!
They’re nice and the price ain’t bad either! I do miss having glass on my kits to cover dust but it’s nice being able to have kits hang over sometimes like the Penelope or the meteor uni.
Awesome collection, can't wait for the RG Blast Impulse review.
That will be coming soon, decals have been delayed delivery. Im hoping this week or early next week.
Wow, out of all the Gundam UA-camrs I've come across, you're the first I've seen to use decals and topcoat. It really shows that you're both a dedicated builder and a passionate hobbyist! Keep It up man!
Thank you for the kind words! I always try to finish my kits before putting them on my display shelves, but sometimes I run out of room in my work in progress closet so they'll be on the shelf while I wait to get to them.
Found your channel recently. Enjoy your approach to reviews and your style. Kepp up the good work
Thank you for the kind words! I'll have more videos very very soon!
Wow i can see some gems in the back
wow, that was massive! thank you for showing😍
Thanks for watching and for being subscribed for so long!
Amazing collection
This is GOALS dude , congrats on the growth you really seem to hit your stride! IM catching up ^^
Thank you man! Your videos are always my go to when it comes to 3rd or 4th party kits.
so organized ~ Thanks for the video.
Thank you for watching! It took me all day to film lol my room was a disaster after the RG video.
Thanks Joe for the awesome video😉! Really enjoyed it!
Thank you very much! I appreciate you watching and your support!
awesome setup
Thank you so much!
Gunpla Nirvana 😭 keep the videos up brother. Love seeing the surge of western Gunpla channels
I have plenty more in the pipeline! Thanks for watching, and supporting!
new subsciber -- I really like your content!
Thank you for the sub! Plenty more videos coming soon.
Yeah sweet man, congratulations!
Thank you very much!
Awesome collection! This will be me someday hehe.
Thank you! I hope your collection prospers.
Great vid!
wish my set up looked that nice
It took me a very long time to get here. You’ll get it someday!
Great tour! Nice idea to display real aircraft for sense of scale, I like to display rg pilot figures here and there for that, even unpainted they bring change 1/144 models impression.
I have one of those pilots on my OYW shelf but plan on spreading them out on the other shelves for frame of reference, especially on my late UC shelf where the kits get massive. I just need to find my pilot figures first lol. I've seen people paint those, it must take a LOT of patience to do so.
@@JoesGunplaGarage Yeah, it's really a miniature painting, suppose not any gunplay modellers have that skillset.
I realise that my comment was an obvious one, but I rarely see this figures on the shelves on UA-cam, may be that's way there is none in newer RG sets
Thanks for sharing the madness Joe, lots of unfinished/pending projects you got there as I'd go crazy just trying to figure out which to tackle first 😂 My guess is you got 20 bootlegs. Awesome collection btw 😎
Thanks for watching! I wish I had more time to finish them all :( sadly the release schedule the past few months meant having to snap and build a kit, review it, then move to the next one very quickly. I'll finish the WiPs soon enough, fingers crossed lol.
31:30 that's happening to my rg freedom gundam too.
that's annoying, I wonder what's causing it. My freedom isn't anywhere near a heat source or anything that would warp it like that, very disappointing. :(
lol RG zeta is what got me back into it
Might’ve missed it but how are you venting while Airbrushing? Hopefully using a VOC respirator too?
I filmed this video twice. I forgot to get that in my second go (first round of footage got corrupted). I have my airbrush booth vent go through a hole in my floor and out next to the dryer vent. I replaced the plastic spray booth vent hose with regular dryer ducting and it worked perfectly. You didn’t miss it I’m just dumb and forgot it in my second round of filming.
Have you tried latex liquid mask? It's a lady product for beauty masks. You might like it and you can't beat the price. Plus you can let your gal use it too. POINTS!
I’ll have to look into it. I’m always down to try some new technique.
Those chinese panel liners that you have, I have 4 of them and they work great. You need the main solvent for them though as its going to be the medium of that colored one. As in solvent first to the panel line then the actual colored panel liner
Out of all those HG Witch From Mercury kits, do you have any most/least recommended or favorites?
That’s the next tier list but don’t tell anyone. Issa secret.
33:55 and we know why😂😂😂
Working on a video now on how to fix it 😭🤣
I burst out laughing. It's almost universal of how some builders don't like that one. My local hobby shop has that one in stock too. 😂
Heya Joe, do you have any tips on how to keep dust off kits? aside from having enclosed case
Thanks!
I use a tamiya dust brush. but its unpreventable with the kits out in the open like this sadly. I did look into adding plexiglass doors and walls to these shelves but it's quite expensive to do :(
The backlog and works in progress stress me out but I get it. 😅
It stresses me out too lol. This year was decently stacked for releases so a lot of the time I have to build, review and move right away to the next kit before decals and top coat to finish. I'll usually try to catch up 1 weekend a month and decal and top coat a bunch of kits but having 3 releases in December along with the holidays made it difficult. This gives Delpi and G Rework time to make a set of decals, I'm not opposed to making my own scheme or reusing decals from an adjacent kit but I like the added flare a specific decal set has for a kit.
I want to see/hear the blue kshatriya story :D
haha that's an oldie! I built my first kit in 2000 with a no grade 1/144 wing but I've built models with my father most of my life so it's always something I've been into. 2010 Dynasty Warriors Gundam 3 releases and I got heavily back into the franchise after that collecting nearly all MSiA figures that I had when I was a kid. I wanted a Kshatriya to go along with the robot spirits unicorn and sinanju I got to fit in with my MSiA collection so this was technically the first Gunpla I built since 2000 and I got the Kshatriya in 2011. 2013 after building the RG Zeta I realized that NOTHING was to scale in my whole model collection so I sold my entire MSiA collection and switched to gunpla full time to start fresh. I painted the Kshatriya blue as a way to make a custom. These are water color paints I got from Michael's craft store lol, its very delicate, if I look at the kit it get's scratched. I retired the blue Kshatriya from my collection after I finished my resin build Kshatriya. Blue is very loose and floppy having been moved 5 times, it's not a very good build, even the sleeves markings where done with white out, not even paint.
I came into this hobby from very very humble beginnings. Sorry if that was a bit long winded but it's really Blue that got me back full swing into this hobby of model making, so you pulled on my nostalgic heartstrings a bit haha.
Did you use joint tape or glue to get your destiny impulse's forearms to stay on while holding weapons?
What a setup and what a beautiful collection!!! I’m guessing you have about 5 bootleg kits in there??
You are actually the closest guess so far! Thank you for the kind words!
I like you're set up... I can't set up my gunplas because im sharing a room with a sibling... Wahaha....
New sub from ph🎉
Thanks for the sub! I appreciate it!!!!
Dude where did you get those Iowa masks?!
Both were made by Ian Lunduist. They were NOT cheap lol. Here’s his Etsy page. www.etsy.com/shop/STTFX
@JoesGunplaGarage Wow those are awesome thank you! Love your collection btw. I also wanted to ask do you plan on making a video on your Top Coating process?
How long does it take you to dust is all? XD the majority of my collection is in detolfs so those are spares but dust is crazy in my house for those unworthy of the glass
I dusted every shelf before this video (except the WFM shelf) and it took me roughly 6 hours to remove all the kits, dust the kits, then the shelves. This happens about twice a year or in special occasions like this video lol.
If those HG Neo Zeong's ain't bootleg's I'm very surprised.....
They’re both legit Bandai kits! I need to finish them though.
@@JoesGunplaGarageHOW IS YOUR BANK ACCOUNT NOT at ZERO?!?! Mine would hit zero before i even got it
the perfect grade perf unicorn is daban isnt it buddy ;)
Ding ding ding! That’s one of them. I’m also poor lmao
@@JoesGunplaGarage i got the daban perf in my backlog too, im not paying those prices for a bandai one. Im stuck on doing leds or using that nice painted frame
how do you prevent dust
Sadly I can't so it's a catch 22, this setup is nice for those bigger kits like the meteor and penelope so it can hang over the shelves if it needs to, but it means a whole day of going through with the dust brush and dusting everything every couple of months. I'd love an enclosed cabinet but those are very expensive now whereas these shelfs are relatively cheap by comparison.
@@JoesGunplaGarage my worst fear, thanks for confirming. dust is ubiquitous.
Soo.. how often do you dust them per-year? 😅
Twice, usually every 6 months or sooner if I notice it getting really bad.
Awesome collection and vid! Though, your pronounciation of Ver Ka kinda drove me mad lol.
That's officially how it's pronounced lol. I only pronounced it this way for the video as a bit of trivia, I've gone back to the American way of saying ver KAH in newer videos. I'm not sure why K A is the official pronunciation, it just is lol.
I melted my pg perfect strike helmet couple weeks ago lol... boiling helmet to close a gap ... didnt work, thankfully it comes with original sculpt too..
1:47 I wouldn't say 2 inches is too shallow, is about average
Above average even
37:30 also the ver ka is short for version katoki, pronounced kah, like kah-toe-key, by pronouncing both letters separately you're insinuating its an acronym with each letter meaning something different
ua-cam.com/video/7jesDcNYd0s/v-deo.html
Go to 2:06 on this video. K A is the official pronunciation.
@ oh yeah you’re right
e6000 is awesome maybe not for gunpla, but rc and lots of other things
33:56 ☠☠☠☠☠
Don't worry I fixed it lol. Video soon!
What’s wrong with deathscythe
He’s just vibing in the back there.
House tour when
LMAO bro never, my house is a DISASTER. joys of having 2 dogs and 3 cats.
How do you dust this stuff?
I have a tamiya dust brush, I'll go through a few times a year and dust the kits and I'll dust the shelves at least twice a year, it's a lot of upkeep for sure but full glass cabinets are a little pricey. I might add plexiglass doors and sides in the future to these but this'll do for now.
Need a Palace Athene
Ps. Slipknot ftw!!
Fairly new to the hobby, but I only buy the kits that looks cool to me, be it main character or just grunts. Do you like the design of each and every mobile suit, or are you just trying to get them all, and have a complete set?
I am curious, because kits like the heindree's and the lfrith thorn gave me buyers remorse as soon as I finished them. And most of the zeon mobile armors are just ugly imo.
My main basis for collecting is to collect 1 of every HGUC kit and any subline that comes out after. There's about 260 HG mainline kits and I'm only missing about 35 of them, a lot of the ones on my list are incredibly old so it'll be some time before I'm finished collecting. I was fortunate to collect HG WFM as the kits released so I didn't have to worry about trying to find kits that are out of print. Going forward I'll collect as kits are released, and being a youtube reviewer it's in my best interest to cover newer kits...even if I'm not savy on the design.
I've seen all Gundam Media up to this point except for some obscure video game cutscenes so I'm pretty knowledgeable when it comes to lore and things like that, a lot of the times I'll be iffy on a design from it's release images but after I watch the show I'll have a better understanding and appreciation for the design, Turn A is a perfect example. I never cared for the design but after watching the series I liked it quite a bit more.
For bootlegs, i think you have 35 percent, wild guess
Please don't say Ver "K"-"A", its Ver. Katoki. or just Ver.Ka
But is officially pronounced K A :(
it's "ver ka", not "ver k. a."
Apparently it isn’t. ua-cam.com/video/BjeoGx1GUoI/v-deo.html I’ll probably still call it ka over K A but figured I’d throw that into the video for a little bit of trivia.
@@JoesGunplaGarage Ohhh! The mispronunciation sounds better though imo.
In the west/English speaking areas it was erroneously pronounced “Kah,” but it has always been Ver “K A” or Ver “Katoki.”
I still say it the wrong way since that is the common English parlance, but I acknowledge the proper way.