Thank you! Yeah this atv needs only one wire to run, and you can feed it with oil if you want ;) For now it is converted to an automatic transmission, for much more comfortable drive
Perfect work.👌🏻 Please tell me which are dimensions of atv. Length,width,height? I want to build something indentical. This information was be great before I started project.. Tnanks
@@0Renxx0 I have E39 diff and VW shaft is almost ok to use. I only need longer bolts for and I'll shorten the shafts - with between the brake disk's will be around 120 cm. Too wide for my trailer.
Hello! What tubing were you using in this frame? How wide, high, lenght is this atv? Do you have any blueprints of frame? Next video can you show more steering system?
Hi! I am from Team Enigmatic Plodder , a student quad bike team from India. Please release a few manufacturing videos and tutorials! Great job on this one♥️
Wow that thing in insane! Awesome build, thanks for posting a link :) I need to check your channel after this and see if you have any other videos of cool projects? How about that other cool vehicle it was parked next to, any videos of that one? Hello from The Pacific Northwest Washington state! Where do you live?
Renārs Feldbergs That’s great! I’m looking forward to seeing a video of your Buggy and updates on your homemade 4 wheeler! Ps I just subscribed. Take care :)
do e34 diffs are mandatory, or i can use, for example, e36 ones as well? Also, for the front drive, did you just flip the diff over to spin together as the back ones? Did you weld up the gear inside the gearbox to spin both front and back?
@@0Renxx0 i see. Thank you! Also, did you make the axels connecting gearbox to diffs, as well as the ones going from diff to wheels yourself? Or these are stock/easily modifyable?
Hello from Georgia, Tbilisi. This is really great work i like it. Super! I have a few questions: gearbox is satelite welded? If yes its original or diy? How much is max speed of vehicle? This bmw e34 2.65 diff has LSD? And the last question how much does it cost this build?
Hello and thanks! Gearbox diff satelites are diy welded, max speed in 5th gear must be around 100km/h at 5k revs, in 1st gear at idle around 3km/h. It is possible to find LSD for these diffs, but for now i dont have it. A this moment it cost to me around 500euros to build.
Does it use the fwd gearbox still? I couldn't see where the rear driveshaft is attached properly. Nice build man mean cheap fun and it looks like it'd be more capable than a lot of factory built quads out there.
@@0Renxx0 that's a great idea, I've never seen a fwd gearbox used like that before but that's some clever shit mate. I'm a bit of a " gimme a grinder and a welder and I'll have a crack at anything " guy aswell. Building a rear mounted fwd beach buggy myself but this things got me thinking about the other fwd donor cars I've got around here. Again Awesome machine man.
Jeden Polak robi takie quady i mówił że jakiegoś quada za około 30K sprzedał i robi głównie z 1.6 TD (albo TDI) i 1.9TD a jak chcesz go znaleźć wpisz po prostu "quad samoróbka 1.9TD" i pytaj pod najnowszymi filmami w komentarzach i sprawdzaj opisy
lsd bloķis tur nederēs,viņš strādā tad kad rati ir uz zemes.rati izkārsies pa dioganāli un uz priekšu netiksi tāpat.dīzeļa fiška ir tā ka tu vari braukt tukšgaitas apgriezienos un viņš reāli velk.ar automātu tā nesanāks.mans tāds kvadrs uzbūvēts jau sen tikai 1.8 benzīns 90zs.reduktori no audi quattro ar bloķiem kurus ieslēdz ar pogu.bez bloķiem ir grūti.daudzi sametina satelītus reduktoros bet tas ir galīgi garām jo palielinās apgriešanās rādius kurš un tā nav maziņš.
@@andis10000 BMW reduktoriem nav citas iespējas kā tikai LSD, izvēlējos viņus jo pārnesums ir 2,65 un tas pie gandrīz 30'' riteņiem dod labu dinamiku.Šim motoram ir ap 200nm jau pie 2k. Max ātrums aptuveni 100km/h pie 5k rpm un ~4km/h brīvgaitā. Gribu automātu jo nav ērti spiest ar kreiso kāju sajūgu un slēgt ātrumus ar roku. Tavu projektu redzēju buggy-plans.ru
Check new video, with some updates to MadMax! >------------> ua-cam.com/video/fxxyzw7uO0w/v-deo.html
knee buster 3000
cool build i would never thought this was real
Really cool. Very inspirational and motivating! Well done.🤙
This thing looks straight out of borderlands. Nice
Awesome job on that! Like the fact it’s diesel to! Turboed to boot!
Thats an Awesome build right there!!
Excellent build! It is inspiring me to make something of my own. Thank you.
great machine, I am just starting construction and I am looking for information about the length of the frame, best regards
greetings from finland, this atv inspired so much so i start to build same kind for me too. thanks for idea!
Nice!!! Make some photos or video from your build, very interesting!
@@0Renxx0 sure, i documet my project very well for people who want to do it but need measurements and plans.
@@saulisantalahti9310 I dont have plans, they all are in my head! ;)
That thing is awesome. Feed it biodiesel amd it will run for everr. If i would have a farm I would love to have something like this.
Thank you! Yeah this atv needs only one wire to run, and you can feed it with oil if you want ;) For now it is converted to an automatic transmission, for much more comfortable drive
that steering is so cool
Can you go in to more detail about how you built it. The breaking and stearing
Hello. From what engine you have engine starter. ? Orginal 010 automatic trans colide wif oil line from turbo!
That's pretty epic haha nice build man!
Jakie masz felgi i opony? Czy mógłbys podpowiedzieć?
Hello form Romania nice job💪💪
Thanks! 👍👍
Ako máš spravené to riadenie ?
Respekt!!!!!!
It appears that the frame is only tack welded together, at least in certain places. Please tell me I’m wrong?
In most inportant places it is full welded, in others only tack welded.
А почему дизель? для квадроцикла наверно важен рывок чем тяга?
Perfect work.👌🏻 Please tell me which are dimensions of atv. Length,width,height? I want to build something indentical. This information was be great before I started project.. Tnanks
Hello, what are the steering knuckles, suspension arms, rims, what sizes, etc
*Darn!* That thing is *BIG!*
Great!
Witam jak rozwiązana jest przekładnia kierownicza
Are you using original VW drive shafts, or are shortened or made from Bmw and VW shafts. I am thinking about a same kind of build
3rd option!
@@0Renxx0 I have E39 diff and VW shaft is almost ok to use. I only need longer bolts for and I'll shorten the shafts - with between the brake disk's will be around 120 cm. Too wide for my trailer.
Hi can I use part of your video to my compilation homemade inventions ?
ok
@@0Renxx0 Thank You
Bravo 👍👍
Hello!
What tubing were you using in this frame?
How wide, high, lenght is this atv?
Do you have any blueprints of frame?
Next video can you show more steering system?
Hi! I am from Team Enigmatic Plodder , a student quad bike team from India. Please release a few manufacturing videos and tutorials! Great job on this one♥️
Mad max's Atv
Super cool build
Wow that thing in insane! Awesome build, thanks for posting a link :) I need to check your channel after this and see if you have any other videos of cool projects? How about that other cool vehicle it was parked next to, any videos of that one?
Hello from The Pacific Northwest Washington state!
Where do you live?
Hello and thanks, that other project is buggy made from opel astra and i will make video about it. Btw i'm from Lavia (Baltic States)
Renārs Feldbergs That’s great! I’m looking forward to seeing a video of your Buggy and updates on your homemade 4 wheeler! Ps I just subscribed. Take care :)
can you send plans for this atv to me at danilo.petkovic@gmail.com
Didn't expect to see Mike here in the comments😀 Congrats on the pinzgauer, build is going along nicely👏
Отличная работа)
will this be 4wd eventually or are the engine mount and steering linkage in the way?
4x4, i need to finish front shafts.
How did you do the stearing
Lovely....feast of the eyes...❤️❤️
How much would you want to build one of those but maybe with a 2 cyl Cummins or 4bt if possible
do e34 diffs are mandatory, or i can use, for example, e36 ones as well? Also, for the front drive, did you just flip the diff over to spin together as the back ones? Did you weld up the gear inside the gearbox to spin both front and back?
Hello, i use e34 2.5tds diffs because they have 2.65 ratio. and yes, diff inside gearbox are welded.
@@0Renxx0 i see. Thank you! Also, did you make the axels connecting gearbox to diffs, as well as the ones going from diff to wheels yourself? Or these are stock/easily modifyable?
@@dainyzas225544 Look at this forum, there are some pics: buggy-plans.ru/forum/viewtopic.php?f=25&t=11635
Czy ma pan plany z budowy albo zdjęcia
Круто очень , выглядит брутально
Hello from Georgia, Tbilisi. This is really great work i like it. Super! I have a few questions: gearbox is satelite welded? If yes its original or diy? How much is max speed of vehicle? This bmw e34 2.65 diff has LSD? And the last question how much does it cost this build?
Hello and thanks! Gearbox diff satelites are diy welded, max speed in 5th gear must be around 100km/h at 5k revs, in 1st gear at idle around 3km/h. It is possible to find LSD for these diffs, but for now i dont have it. A this moment it cost to me around 500euros to build.
@@0Renxx0 thanks! This is really cheap and great work i excited it.
Nice idea, but why the square tubes are used?
Because i dont have tube bender and its easy to work with squares
What differentials did you use
I like the build
Diffs are from BMW E34 2,5tds with 2.65 ratio
Can it sand dune??
Gostei do quadriciclo 100%recociclado.parabens
De unde ai luat cauciucurile și pe cât sunt jantele pe 13
Rims are R15 from Opel Astra and tyres are SIAMES 7,5-R15 (29,5")
would like to see it when finished and running
ua-cam.com/video/fxxyzw7uO0w/v-deo.html
Hello ! Can you tell what size the ATV has? Very nice, congratulations
Lenght ~2.10m and width ~ 1.30m
thank you very much
good work, congratulations !! just, diesel engine, it shouldn't smell good :) thank you for sharing..
Long time VW/Audi tech! I love this and want to build this! Did you modify (weld or solid) the differential for a full time 50/50 split front to rear?
Yes, gearbox diff is welded
С чего были сняты размеры?
сам придумал
New four wheelers after a certain someone falls asleep on a red button
From what vehicle are Front and rear differential on automatic 4x4 gearbox?
Read description.... Diffs from BMW E34, gearbox from VW MK1
Jakie masz tam opony jaki rozmiar i jaki rozmiar felgi
What tires do you have, what size and size of rims ?
Tyres: SIAMES 7,5-R15 (29,5")
Rims: Opel Astra R15 J6,0
Can you give a email adress?
Супер)👍 от чего мости поставил??
BMW E34
А какая максимальная скорость на этих мостах км/ час?
@@OleksandrCenusabe 60km/h
Gear box automatic?
Yes, vw 010 automatic gearbox
Donde se consigue esos neumáticos
Tyres: SIAMES 7,5-R15 (29,5")
super cool
Cinema é pra você,É pra você Sim! Alta Qualidade 720p
Gostei muito do projeto
wooow!!!
Nice air filter bro
Vai atrumkārbas satalīts ir sametināts ?
Jā sametināts.
frumos lucrat
How many?
What’s this made out of?
read in description
Quanto pesa? Un trattore pesa di meno
Пушка👍👍👍
Does it use the fwd gearbox still? I couldn't see where the rear driveshaft is attached properly. Nice build man mean cheap fun and it looks like it'd be more capable than a lot of factory built quads out there.
Yes , VW Passat FWD gearbox with welded differential satellites.
@@0Renxx0 that's a great idea, I've never seen a fwd gearbox used like that before but that's some clever shit mate. I'm a bit of a " gimme a grinder and a welder and I'll have a crack at anything " guy aswell. Building a rear mounted fwd beach buggy myself but this things got me thinking about the other fwd donor cars I've got around here. Again Awesome machine man.
Размеры можно рамы?
width ~125cm, wheelbase 160cm, body lenght ~220cm. Profile: 30x30x1,5mm
Like.
Super 👍👍👍
Music??
Za ile byś mógł zrobić tego quada bo mym kupił
I will think about it...
Jeden Polak robi takie quady i mówił że jakiegoś quada za około 30K sprzedał i robi głównie z 1.6 TD (albo TDI) i 1.9TD a jak chcesz go znaleźć wpisz po prostu "quad samoróbka 1.9TD" i pytaj pod najnowszymi filmami w komentarzach i sprawdzaj opisy
Wheelbase??
160cm
@@0Renxx0 gauge? 😀😀😀
Top gostei parabéns
Nice👍
nice....get a seat on that thing brother
Bună a-și fi interesat sa fac și eu unul la fel dacă mati putea ajuta cu mai multe detalii mulțumesc
Me gusta
2:33 i love sparks HA HA
Możesz podać adres e-mail do siebie?
👍
Mad Max 4
Суинь більше фото як з'єднав переднього моста з КПП.
Как вас зовут
Can ams next bike
tur tas dīzelis 100 gadus nav vajadzīgs.vot reduktori ar bloķiem gan ir nepieciešami citādi nekur tālu ar viņu neaizbrauksi.
Man bija pieejams dīzelis un es viņu tur arī ieliku. Kārba jāmaina uz automātu un bloķi vajag LSD šiem reduktoriem.
lsd bloķis tur nederēs,viņš strādā tad kad rati ir uz zemes.rati izkārsies pa dioganāli un uz priekšu netiksi tāpat.dīzeļa fiška ir tā ka tu vari braukt tukšgaitas apgriezienos un viņš reāli velk.ar automātu tā nesanāks.mans tāds kvadrs uzbūvēts jau sen tikai 1.8 benzīns 90zs.reduktori no audi quattro ar bloķiem kurus ieslēdz ar pogu.bez bloķiem ir grūti.daudzi sametina satelītus reduktoros bet tas ir galīgi garām jo palielinās apgriešanās rādius kurš un tā nav maziņš.
@@andis10000 BMW reduktoriem nav citas iespējas kā tikai LSD, izvēlējos viņus jo pārnesums ir 2,65 un tas pie gandrīz 30'' riteņiem dod labu dinamiku.Šim motoram ir ap 200nm jau pie 2k. Max ātrums aptuveni 100km/h pie 5k rpm un ~4km/h brīvgaitā. Gribu automātu jo nav ērti spiest ar kreiso kāju sajūgu un slēgt ātrumus ar roku. Tavu projektu redzēju buggy-plans.ru
Haha 150k views and the word "turbo" isn't even added to the title! Impressive
Haha! Thank you, i will definitely ad that ''turbo''! :D
Aight aight lemme tell the joke
*Still better emisions than a VW TDI*
How much horsepower? 2000?
🤣
90-100
madmax
Shut up and take my money
Husband I got u a 4wheller wife. wear all I see is a monster truck
Wait a minute that's no 4x4
not yet ;)
Looks awesome though and I bet it's got tones of power
@@sicelogumede6295 ~90hp and ~200nm
You can basically tow anything wow
It’s not 4x4
At this moment it is 4x4 ;)
Can you send vedio for it after 4x4
@@ahmedobm7931 streamable.com/yksty