Absolutely. I'm actually about to mix a techno track that I made this week. This is exactly what I needed today. Thank you so much for this and everything else.
Will, are you aware you can underlay the reference track in VST Span? Select default preset >Routing> Input routing> Select ch 3&4 at IN3& IN4> Choose a colour on underlay and sidechain your reference in the device window. 👍
for mastering i also use a plugin ( sound id) it really helps. it even lets me master properly on headphones. it saves a ton on expensive hardware. basically it looks at the frequency response and corrects it for headphones. for monitors you can get a mic and measure to make them flat taking into acount your room acoustics.
My Dad is in his 80's and he was round at mine for a weekend just to chill out. I was doing some mastering and ask whats that and I said that the reference track, he then said "So thats why it all sounds the same these days" such a Dad thing to say eh?
I'm doing something similar. Actually, the template I use to start each project has plugins on the master and reference tracks that I periodically enable and disable when comparing various parameters, including EQ for the mid-range, among others. It really helps to create a mix that will translate better on smaller speakers, phones, and laptops.
since I mix with midrange and this technic, my product is taking a step up with general balance, tone and clarity, and I'm sure now that it's translating the right way, again thx you will !
3 things I learned from you that made a clear difference in my mix has been 1. anchoring around kick level 2. top down mixing 3. starting with midrange. sounding much better on a variety of speakers (laptop / phone etc) and dialing in the low and highs "for support" is simpler and it delivers @@EDMTips
Thanks for these killer tips man, i'll definetely try these in the future! I just discovered your channel like an hour ago thanks to the Serum drone pad tutorial video that you made which you covered some topics like sound design, mixing, and composing in the same video! I can honestly say that there's some really good information on your channel. Keep making these awesome videos man we definetely need em', good job!
Had to stop the VT half way through, I had to to tell you how much I've learned already. When at the beginning you were expaining things ot was like you reading my mind with mid range issues, I could have finished every sentence you were about to say. I ve made great music, when I play it in the car it sounds crap. I had to give up a career long life in music following a colossal heart attack that almost finished me off. I've down sized now as I'm getting older and come back to music back where I left off which was the birth of midi. I have spent almost all my savings building a home studio and decided to stop spending as it wasn't making my recordings sound any better. I now realise there's nothing better than knowledge. Now with heart failure, I'm using music to keep my mind offa things, so I need people around me than can cope with a beginner. I'm so sorry about the long rant, but thanks for this VT I can't wait to try your techniques and other people that might consider helping. Best wishes, Quentin (UK)
@@EDMTips Hi again, can you help. I'm using Studio + v6 and I have an ESI M8U midi interface that also has 3 device usb ports and usb 3.2 host out. This explained , I'm worried that studio 1 won't pick up the ESI interface, my question is what do then? Hope my message finds you well, very happy to receive any tips from other subscribers. Best, Quentin .
I am slowly progressing to the point where I critique my mixes with technical questions rather than "I know it sucks". This music thing is much to take in, but gotta get those babies born somehow.
Seems like a useful methodology. I'll probably approach it a little differently since I use Sonarworks, and could just use the "smartphone" setting to toggle the eq on an off. I already use many of the presets in the translation check, but this video shows the benefit of using them earlier in the process, instead of leaving them to the end like I've been doing.
Every sound has a fundamental frequency. All should be attenuated or boosted depending on the location within the frequency range of the mix.. Even a hi hat has mud..
Do You call mud the lower frequency of an hi hat? Well if yes that part it's not mud, if your case is finding on a single sound in a mix like an hi hat, supposed to have a range from 340 to up 10 khz something lower then 340 in the frequency spectrum you gonna cut, no matter if that lower part still be part of a sound, no matter if it's on the side or on the mid, no matter if it's not a hum or a wrong recorded sample you will still found mud on everything expecially on single sounds.???mud on a single source if it s really a problem means that your saMples and your recording process sucks other wise mud come from the interaction of more then one sound in a mix and its easy to fix with a simple narrow bell cut on the master. Peace
@@dmstudio.sicksoundzuhhh... You obviously don't understand how microphones, or recording works. All audio recorded with a microphone will have low, usually imperceptible levels of unwanted noise. That's not up for debate.
@@GravytyMusic that's nothing about mud it's simply what is called hum, buzz, wich is normal in a fully analog environments, noise floor it's something U had to deal with back in the seventies, from1990 till nowadays things are changed we are no more limited to a poor headroom and unwanted electrical noises issues unless you don't have updated knowledge, skills and equipment.
@@dmstudio.sicksoundz I am a electronic beat maker so yes I do use samples. Hi hats can cloud other high end instruments and other hi hats/cymbals so, dipping out and leaving room for each one is the same as mud for low mid range being stacked.. That's why I say this.
I definitely think that has helped. I have most trouble with bass though. Small monitors and good headphones. My mixes sound muddy in the low end on really subby systems so looking forward to watching that video.
I always do a test in the car (stock sound system in an 04 Camry - it's brutal but honest - even reference tracks I like don't sound great but the bass is managed enough), and on a hi-fi system (not terribly expensive). I always check vs reference with a quick master on my track to get the level. I'd be scoping out a second hand set of three way hi-fi speakers and an amp - they're not that pricey and although they're not surgical they provide a good perspective on how the bass will work in the club. Again, testing on these alternate systems vs reference is key.
@@EDMTips I've been watching your bottom end videos this morning. Brilliant stuff. Just need a couple of days off work to get my tunes ready for the summer. Thanks. X
Instructive as ever Will. I've been using Wharfedale 9.1's via a Sony AV amp as a secondary ref system to my Dynaudio LYDs (+ 9S Sub) that I switch between but you've convinced me to invest in a pair of HS5's for the midrange emphasis (Christ! more expense..)
Thanks for sharing your knowledge. All subscribed for some great tips. Are you able to share techniques producers use to mix and master for max loudness when uploading music to UA-cam? Your gain staging video helped a bit but I'm missing something and can't seem to get anywhere near the perceived loudness most do. It would be interesting to see if any others would be interested in this.
Well, looks like I've done my job then! 😉 Thanks for subscribing and I hope you continue to enjoy the content! 🙌🏻 Great suggestion, Drew! I already have some videos on mastering and LUFs, so I recommend checking them out first :)
@@EDMTips Appreciate your reply. Grabbed the Youlean Loudness Meter which will come in handy :) Thanks. I watched your LUFS video and some great info about loudness for streaming. I've always mixed for -14 LUFS and have been able to upload to UA-cam at 100% / 100% and around -0.02db and have even tried 100% / 65% 4db (for example) and for me, they sound the same loudness wise while professional mixes around the same seem way louder. I need to turn mine up and theirs down :) There's obviously something they do for the streaming mixes that maximises on the UA-cam upload crunch. I've searched for months and can't find anything. A closely guarded secret I guess lol. Looking forward to more videos of yours. Cheers from Australia.
Wow, this was exectly the 'problem' I ran into lately... tracks sounding sweet on my home system but terrible on devices like an Iphone or tablet... thank you so much for sharing! ;))
Plugin Boutique's Adptr Plugin does this kind of setup. You can drop the master by minus how many dBs, it has filters a mono button, you can check the stereo width of the master and compare it to your mix, you can load in multiple references it's very cool 👍
You forgot to mention Avantone MixCubes! Modern day Autatones that are actually still being produced. Also I'm pretty sure the Yamaha HS series is full range and not like the NS-1O at all aside from looks. Love all your videos, always solid advice 🤘
Hey Will, amazing technique for midrange mixing, will try this out ! Also I spotted those new Sennheiser HD 490 pros, are they worth the upgrade ? or any other recommendation ? I am planning to take a jump from an Audio Technica ATH-M40x, I use headphones only for music production to mixing & mastering.
@@EDMTipsthanks for the reply! Do you think I could manage with my ATH-M40x only ? If not then which one would you recommend, keeping in mind an accurate frequency response for producing, mixing and mastering.
Hey will, can you make a video of how and when using a limiter (not specially on the master bus but with sounddesign or instrument busses). would be really awesome, because i always wonder, how to use it as a compressor or in a chain with them. Best Regards
I've just tried mixing the mids as suggested with the ends filtered out in mono. Trouble was when I added in the highs and lows back, the mids were too loud and out of balance. My original mix just done by ear sounds better. Dunno, maybe my 60yr old ears are good enough. Will watch your other vids as I'm sure ill learn something as DAWs are new to me.
Will, I love your content and the production is top notch. But the beginning editing to so busy and fast-paced with so much happening that its actually distracting. I had to rewind a couple of times because I kept getting distracted from your message. Your stuff is awesome and I offer this critique in the friendliest possible way. It's okay to take it down a notch. We'll stick around to sit and learn at the master's feet. 😉 And hell yeah I'm going to try this technique.
@@EDMTips that's exactly what I had already done! I didn't realize that I had also activated the second option which closes automatically... Thank you for your content and support!
Yeah first there was mono, stereo, HiFi even surround sound went on to aspire as the new reference. Now we have phones with same audioquality as a stonecake.
@@EDMTips I guess that makes sense but I still feel like that might result in carbon copies if done by new producers (your demographic from what I've seen)
A very helpful and substantive video, but the way of editing the video, cuts and transitions gives me a headache and I can't concentrate on the content. Too many cuts, shots from different angle. I know that you want to attract attention, but TIK TOK style editing is a bad idea... Don't take this as hate. I love your videos!
your track is lacking actual low midrange information especially on the rolling bassline and thats the reason it sounds shyte on phone speakers, no amount of tweaking with any tools is going to fix missing frequency information.
@@EDMTips yeah sry I couldnt put it in a more polite way..... I was trying to focus on your channels in your DAW and it would cut away. Also the intro too many angles too fast. Imo. But who am I rly. I dont know if thats representative,or maybe im just slow in the head or whatever. But thank you for helping us out with mixing 🙂
Are you going to try this technique out? 🤔 If so, let me know! 👇
i thinks yes its the only way for punch kick and bass yes I will !
Perfect timing for this video as ime just at the EQing stage of my first track 🙌 cheers Will 👍
Absolutely. I'm actually about to mix a techno track that I made this week. This is exactly what I needed today. Thank you so much for this and everything else.
Thank you,!
Realphones vst
Will, are you aware you can underlay the reference track in VST Span? Select default preset >Routing> Input routing> Select ch 3&4 at IN3& IN4> Choose a colour on underlay and sidechain your reference in the device window. 👍
Yes, thank you! It's a good tip - I just forget to use it :)
Thanks for this. Rather annoying putting span on a reference and swapping back and forth. Going to give it a try
What a huge difference! I’m excited to try this technique :) thanks for sharing!
You're so welcome! Let me know how it goes :)
I gaped!!! How much fuller the whole spread sounds from mixing just the mids… really brought the bass and highs out too!! 😮
one of the best channels on the tube! always inspired by your passion and your love for music🥰
Wow, thank you!
Damn, I’ve always been caught up in the high and low end. I’ve always wondered why it sounded terrible on smaller devices. Thanks Will! 🔥
You're welcome, glad it was helpful! 🙌🏻
Your videos are so incredibly helpful. I actually take notes because I'm such a slow learner. Thanks for the work you put into making these.
You're so welcome!
Love this! Thank you for this... 💯
You're welcome, glad you enjoyed it! 🙌🏻
This is a great technique! Definitely going to make use of this!
Stoked to hear that! Let me know how it goes :)
Yes I will. Fantastic!
Running to my computer now!👀👍🏾🤓
Then my job here is done! Let me know how it goes :)
definitely trying this. thanks will always
You're welcome! Let me know how it goes :)
thank you for sharing this approach. Reeeeeally needed this.
You're welcome, Joseph, I am glad you found it helpful! 🙂
for mastering i also use a plugin ( sound id) it really helps. it even lets me master properly on headphones. it saves a ton on expensive hardware. basically it looks at the frequency response and corrects it for headphones. for monitors you can get a mic and measure to make them flat taking into acount your room acoustics.
My Dad is in his 80's and he was round at mine for a weekend just to chill out. I was doing some mastering and ask whats that and I said that the reference track, he then said "So thats why it all sounds the same these days" such a Dad thing to say eh?
😁 Oh, Dads, providing jokes since eternity
He’s not wrong.
@@ryanhursh6322 do you think that referencing is having a bad affect on the music people produce?
@@Andrew-rz7qtit depends
@@PIZZAdayisback on what?
WOWWWW. What a difference!
Thank you! Try it yourself :)
I'm doing something similar. Actually, the template I use to start each project has plugins on the master and reference tracks that I periodically enable and disable when comparing various parameters, including EQ for the mid-range, among others. It really helps to create a mix that will translate better on smaller speakers, phones, and laptops.
Wow, this is the video I needed. Thank you brother for the help. Please keep making videos Thank you
Stoked to hear that, Carlos, glad you found them helpful! 🙌🏻
since I mix with midrange and this technic, my product is taking a step up with general balance, tone and clarity, and I'm sure now that it's translating the right way, again thx you will !
You're welcome, Seb, I am glad you found this video helpful 🙌🏻
Two of them sounds dope! Bigman
Appreciate it! Thanks for watching and supporting the channel 🙂
I've learned about this technique before, but I like your approach a lot. Going to apply to this to track I'm working on now. Thanks!
That's what I'd like to hear! Let me know how it goes :)
3 things I learned from you that made a clear difference in my mix has been 1. anchoring around kick level 2. top down mixing 3. starting with midrange. sounding much better on a variety of speakers (laptop / phone etc) and dialing in the low and highs "for support" is simpler and it delivers
@@EDMTips
Nicely done! Glad my videos have been helpful so far :)
Just what I needed thanks!
You're welcome, glad I could help! 🙌🏻
Thanks for these killer tips man, i'll definetely try these in the future! I just discovered your channel like an hour ago thanks to the Serum drone pad tutorial video that you made which you covered some topics like sound design, mixing, and composing in the same video! I can honestly say that there's some really good information on your channel. Keep making these awesome videos man we definetely need em', good job!
Great stuff Will
Appreciate it! 🙌🏻
Top tip id say Sir. Thank you so much you are helping me on my path.
I am stoked to hear that! Thanks for watching and supporting the channel 🙂
Had to stop the VT half way through, I had to to tell you how much I've learned already. When at the beginning you were expaining things ot was like you reading my mind with mid range issues, I could have finished every sentence you were about to say. I ve made great music, when I play it in the car it sounds crap.
I had to give up a career long life in music following a colossal heart attack that almost finished me off. I've down sized now as I'm getting older and come back to music back where I left off which was the birth of midi.
I have spent almost all my savings building a home studio and decided to stop spending as it wasn't making my recordings sound any better. I now realise there's nothing better than knowledge.
Now with heart failure, I'm using music to keep my mind offa things, so I need people around me than can cope with a beginner.
I'm so sorry about the long rant, but thanks for this VT I can't wait to try your techniques and other people that might consider helping.
Best wishes,
Quentin (UK)
Thanks for sharing, Quentin, and I'm sorry to hear about your heart issues, but glad getting back to music production is helping!
@@EDMTips Hi again, can you help. I'm using Studio + v6 and I have an ESI M8U midi interface that also has 3 device usb ports and usb 3.2 host out.
This explained , I'm worried that studio 1 won't pick up the ESI interface, my question is what do then?
Hope my message finds you well, very happy to receive any tips from other subscribers. Best, Quentin .
I think it's best if you ask this question to the Studio support team :)
From night to day dope right on great.
So stoked to hear that! 🙌🏻 Thanks for watching and supporting
I am slowly progressing to the point where I critique my mixes with technical questions rather than "I know it sucks".
This music thing is much to take in, but gotta get those babies born somehow.
YO THIS VID ATUALLY HELPED OUT HEAPS !
Stoked to hear this, JT! Going to try this method in your next track?
Something I've never though to try before, if I ever have time to dedicate to producing again I'll give it a whirl! Very catchy track also :)
Hey Will Amazing video as always!! Keep them Coming !!
Cheers, I am really glad you liked them 🙂🙌🏻
Nice video! Thanks!
Recommend to you layer one SPAN over another on one page. You can do 2 layers in free edition.
Thank You very much again !!!
You’re welcome, glad you found it helpful 🙂🙌🏻
Great explanation, really hepfull!
Will you by any chance release this mix? I really like the vibe of it!
Cheers, Olivier, glad you found it helpful!
Perhaps I will once I get more time to works on it :)
game changer for me
Stoked to hear that!
Seems like a useful methodology. I'll probably approach it a little differently since I use Sonarworks, and could just use the "smartphone" setting to toggle the eq on an off. I already use many of the presets in the translation check, but this video shows the benefit of using them earlier in the process, instead of leaving them to the end like I've been doing.
Absolutely, Sonarworks make it easier!
Every sound has a fundamental frequency. All should be attenuated or boosted depending on the location within the frequency range of the mix.. Even a hi hat has mud..
True!
Do You call mud the lower frequency of an hi hat? Well if yes that part it's not mud, if your case is finding on a single sound in a mix like an hi hat, supposed to have a range from 340 to up 10 khz something lower then 340 in the frequency spectrum you gonna cut, no matter if that lower part still be part of a sound, no matter if it's on the side or on the mid, no matter if it's not a hum or a wrong recorded sample you will still found mud on everything expecially on single sounds.???mud on a single source if it s really a problem means that your saMples and your recording process sucks other wise mud come from the interaction of more then one sound in a mix and its easy to fix with a simple narrow bell cut on the master. Peace
@@dmstudio.sicksoundzuhhh... You obviously don't understand how microphones, or recording works. All audio recorded with a microphone will have low, usually imperceptible levels of unwanted noise. That's not up for debate.
@@GravytyMusic that's nothing about mud it's simply what is called hum, buzz, wich is normal in a fully analog environments, noise floor it's something U had to deal with back in the seventies, from1990 till nowadays things are changed we are no more limited to a poor headroom and unwanted electrical noises issues unless you don't have updated knowledge, skills and equipment.
@@dmstudio.sicksoundz I am a electronic beat maker so yes I do use samples. Hi hats can cloud other high end instruments and other hi hats/cymbals so, dipping out and leaving room for each one is the same as mud for low mid range being stacked.. That's why I say this.
I definitely think that has helped. I have most trouble with bass though. Small monitors and good headphones. My mixes sound muddy in the low end on really subby systems so looking forward to watching that video.
Stoked you found it helpful! Thanks for watching and supporting 🙂
I always do a test in the car (stock sound system in an 04 Camry - it's brutal but honest - even reference tracks I like don't sound great but the bass is managed enough), and on a hi-fi system (not terribly expensive). I always check vs reference with a quick master on my track to get the level. I'd be scoping out a second hand set of three way hi-fi speakers and an amp - they're not that pricey and although they're not surgical they provide a good perspective on how the bass will work in the club. Again, testing on these alternate systems vs reference is key.
@@EDMTips I've been watching your bottom end videos this morning. Brilliant stuff. Just need a couple of days off work to get my tunes ready for the summer. Thanks. X
Hell yeah, go for it!
Cracking tune that Will. 👏👏👏 if it needs a home give me a shout.
Cheers, buddy, glad you liked it! 🙂
Amazing !!
Thanks! Have you tried this on your tracks yet?
@@EDMTips Yes and its worked wonders thank you
نحن نحبك و نحترم عقلك يا رجل أستمر و أمتعنا يا ويل🌹❤️
You're welcome 🙌🏻
Instructive as ever Will. I've been using Wharfedale 9.1's via a Sony AV amp as a secondary ref system to my Dynaudio LYDs (+ 9S Sub) that I switch between but you've convinced me to invest in a pair of HS5's for the midrange emphasis (Christ! more expense..)
Great, my job is done here then!🙂
YOU KNOW I WANTED TO ASK YOU THAT. THANKS MAN
You're welcome! :)
Thanks for sharing your knowledge. All subscribed for some great tips. Are you able to share techniques producers use to mix and master for max loudness when uploading music to UA-cam? Your gain staging video helped a bit but I'm missing something and can't seem to get anywhere near the perceived loudness most do. It would be interesting to see if any others would be interested in this.
Well, looks like I've done my job then! 😉 Thanks for subscribing and I hope you continue to enjoy the content! 🙌🏻
Great suggestion, Drew! I already have some videos on mastering and LUFs, so I recommend checking them out first :)
@@EDMTips Appreciate your reply. Grabbed the Youlean Loudness Meter which will come in handy :) Thanks. I watched your LUFS video and some great info about loudness for streaming. I've always mixed for -14 LUFS and have been able to upload to UA-cam at 100% / 100% and around -0.02db and have even tried 100% / 65% 4db (for example) and for me, they sound the same loudness wise while professional mixes around the same seem way louder. I need to turn mine up and theirs down :) There's obviously something they do for the streaming mixes that maximises on the UA-cam upload crunch. I've searched for months and can't find anything. A closely guarded secret I guess lol. Looking forward to more videos of yours. Cheers from Australia.
Wow, this was exectly the 'problem' I ran into lately... tracks sounding sweet on my home system but terrible on devices like an Iphone or tablet... thank you so much for sharing! ;))
You're welcome, glad I could help!
Try fixing it and let me know how it goes :)
@@EDMTips I will. What's your solution if you can't find a good referense track?
You can. I just need to look for it :)
Plugin Boutique's Adptr Plugin does this kind of setup. You can drop the master by minus how many dBs, it has filters a mono button, you can check the stereo width of the master and compare it to your mix, you can load in multiple references it's very cool 👍
Thanks for the heads up, I will check it out :)
@@EDMTips I made a slight mistake it's 'Plugin Alliance' Metric AB Adptr 👍
You forgot to mention Avantone MixCubes! Modern day Autatones that are actually still being produced.
Also I'm pretty sure the Yamaha HS series is full range and not like the NS-1O at all aside from looks.
Love all your videos, always solid advice 🤘
Cheers, Viktor, I am glad you found it helpful! :) Thanks as always for watching and supporting 🙂
Excelente!
Nice, glad you liked it! Anything in particular you found helpful?
Good day sir.....
When exporting song after mix .....
Should i off the midrange EQ....
Or.....
Allow it at on and export like that.....
Amen brother
Appreciate it! 🙌🙏Thanks for watching and supporting 🙂
Hey Will, amazing technique for midrange mixing, will try this out ! Also I spotted those new Sennheiser HD 490 pros, are they worth the upgrade ? or any other recommendation ? I am planning to take a jump from an Audio Technica ATH-M40x, I use headphones only for music production to mixing & mastering.
Great question, Bob! I like those HD490 Pros, but I also like my HD650 and use ATH-M50x from time to time :)
@@EDMTipsthanks for the reply! Do you think I could manage with my ATH-M40x only ? If not then which one would you recommend, keeping in mind an accurate frequency response for producing, mixing and mastering.
hi will have you gotten new Sennheisers? they look different to the 650s you had and i bought on your recommendation lol, love mine tbs
Yeah, they sent me a new pair. Comparable to the 650s, tbh!
Nice!
Thank you! Cheers!
Hey will, can you make a video of how and when using a limiter (not specially on the master bus but with sounddesign or instrument busses). would be really awesome, because i always wonder, how to use it as a compressor or in a chain with them. Best Regards
Thanks for the suggestion, Cytasis, I will add this to my list :)
This is crazy. You deserve more subscriber. I just did it.
Well, looks like I've done my job then! 😉 Thanks for subscribing and I hope you continue to enjoy the content! 🙌🏻
hell yeah!
Appreciate it! 🙌🙏Thanks for watching and supporting 🙂
Excellent video. Please make a video tutorial " how to sound like LiQWYD "
Thanks for the suggestion, I will add this to my never ending list 🙂
@@EDMTips , LiQWYD is the best sounding music producer in the world.
I think it's quite subjective :)
the first sentence of this video really hits home lol
I am glad you liked it 😁
Very nice video
Cheers, glad you liked it! 🙂
I think it would be even better system if you added another two EQ with high passed and passed all set to keys - perfect, thanks for the idea
Hell Yeah!!!
Appreciate it! 🙌🙏Thanks for watching and supporting the channel 🙂
This assumes you already have a great starting point with sounds that work well together, but great tips all the same.
Cheers!
hey mate! i'd love to see a "How to JUSTICE" it would be massive!
Great suggestion! What's your favourite track of theirs?
@@EDMTips all discography xD but maybe like “DANCE” or “Stress” !
Thanks, I will check them out
отличный метод !
Appreciate it! 🙌🙏Thanks for watching and supporting 🙂
cool trick
Cheers, glad you liked it! 🙌🏻
Do u have a spotify artist profile? Just curious to hear ur work..
I've just tried mixing the mids as suggested with the ends filtered out in mono. Trouble was when I added in the highs and lows back, the mids were too loud and out of balance. My original mix just done by ear sounds better. Dunno, maybe my 60yr old ears are good enough. Will watch your other vids as I'm sure ill learn something as DAWs are new to me.
❤
The New Mix sounds way better... Really Pro Sounding.... ElectricEddie....
Cheers, Eddie! Thanks as always for watching and supporting 🙂
Merci Will but I thought we had to test frequencies between 300 and 6000 hertz ?
Wow those are the new Sennheiser headphones
They are indeed! And they are pretty pretty good :)
@@EDMTips do they have same or more low end as the Beyerdynamic DT 900 pro x? If I'm not mistaken I've read that they have good bass response.
Cut the midrange, drop the bass ;) (oh, and keep the fire burning)
🔥🔥🔥
Play back on Bose for reference!
🙌🏻💪
Amen🙏
Appreciate it! 🙌🏻
Will, I love your content and the production is top notch. But the beginning editing to so busy and fast-paced with so much happening that its actually distracting. I had to rewind a couple of times because I kept getting distracted from your message.
Your stuff is awesome and I offer this critique in the friendliest possible way. It's okay to take it down a notch. We'll stick around to sit and learn at the master's feet. 😉
And hell yeah I'm going to try this technique.
Thank you for the feeedback, I will take it into account for the future edits :)
How can i open 2 voxengo span on 2 channels and see all toghether?🤔
Great question! The answer is here: ua-cam.com/users/shorts8vRysfVOnlU
@@EDMTips
that's exactly what I had already done! I didn't realize that I had also activated the second option which closes automatically... Thank you for your content and support!
Welcome!
As a reference track is always better to have the wav file or the mp3 can do the job as well ?
Ideally, .wav, but 320 Mp3 is usually absolutely fine
Hi. How I can fix on my screen the two SPAN. I'm able to see only one at a time. Thanks
Ableton preferences, show multiple plugins
@@EDMTips Thanks Will. I really love your video and Tips
sorry about the typos hope you can figure out what I'm trying to say, beginners !
Yeah first there was mono, stereo, HiFi even surround sound went on to aspire as the new reference.
Now we have phones with same audioquality as a stonecake.
did you monetise?
Monetise what, Ian?
Hello, edmtips!
I feel like you're almost copying the reference track in this video verbatim.
Is this a normal thing to do in the industry?
Is what a normal thing to do? To feel like someone’s copying a reference track, or to copy a reference track?
Probably both, although - once you’ve got a basic idea, you’ll usually spur off into a new inspiration
@@EDMTips I guess that makes sense but I still feel like that might result in carbon copies if done by new producers (your demographic from what I've seen)
Yamaha Hs series are nothing like Ns10's other than a white cone, made from a different material.
Thanks for letting me know!
First like and then watch
Haha, appreciate it! Hope you enjoy! 😊
In comparison, mixed for midrange sounds more beefy
Whats wrong with clipping? Thats how you get a loud mix. Your way is old school.
but you didn't mix a thing, man! just adjusted levels, that was pre mixed!
A very helpful and substantive video, but the way of editing the video, cuts and transitions gives me a headache and I can't concentrate on the content. Too many cuts, shots from different angle. I know that you want to attract attention, but TIK TOK style editing is a bad idea...
Don't take this as hate. I love your videos!
Thanks for the feedback, I really appreciate it and we will make changes in the future videos :)
your track is lacking actual low midrange information especially on the rolling bassline and thats the reason it sounds shyte on phone speakers, no amount of tweaking with any tools is going to fix missing frequency information.
✌👋🙏😍💓
Appreciate it! 🙌🙏Thanks for watching and supporting 🙂
If you listen music on phone speaker you deserve bad sound. LOL
Harsh! 😁
Not really
Eh?
ADHD video cutter
Thanks for the feedback!
@@EDMTips yeah sry I couldnt put it in a more polite way..... I was trying to focus on your channels in your DAW and it would cut away. Also the intro too many angles too fast. Imo. But who am I rly. I dont know if thats representative,or maybe im just slow in the head or whatever. But thank you for helping us out with mixing 🙂
nope. its just NOPE. sorry...
Don't be sorry
Hey mate, please tone down the edits and fluff floating all over the videos. Its OTT and distracting.
Thanks foe the feedback! I am personally happy with the edits :)
Nice IKEA Studio Desk 🤣 A mixing expert with a $500 setup pretending to be an industry specialist for some UA-cam peanuts
Ooo.. let me hear your masterpieces? Or are you just buying super expensive desks and think they make you a professional producer? 😂
The guy has really sound advice, don't worry about his furniture, just sit back and be educated... ;)
penny collector advice @@EDMTips
You must be fun at parties...🙄🫡
Still haven't heard anything you've created but it's easy to be degrading online, right?