The problem is still the limited amount of 3.5" props. And many of them are t-mount, which I personally absolutely hate. Nothing worse than messing with finicky little screws on the field. Chris, we need AOS Propellers!!! 😊
Seems you havent checked the prop market lately. Hqprop 3.5x2.8x3 and gemfan 3630 for example. Now the issue would more be not enough 5mm prop shaft motors. Only tmotor 1804 or most 1507 motors.
Just brought mine with mamba F740 aio and flash, firefly 2004 2950kv motors, and the best hd video system, walksnail v3 kit, i hope the frame is as durable as it looks, have always brought Geprcst3.5 and never boke one yet! ❤ the explanation and hopefully will ❤ the v5 3.5" frame as much or more, cheers Chriss
Power motors like 2205 do some resonanse vibrations at 50-100% throttle for aos35 frame with o3 unit fc mount style. Need to make pids lower to correct it. Is there any way to fix this problem?
Not needed anymore And saves weight The 3.5 is heavy enough without em I think the A design was also about eliminating vibrations, not sure But the V5 has cut outs I have it and it's definitely better than my Quadmula SF35 in tuning, but unfortunately around 10g heavier with same setup
They were a bit too snappy! I’m using them on my UL5 and my T3. Replacing arms is just part of using them. But I’ve never broken or bent a motor on those quads. Something has to give.
Due to the use of the new XCell technology, they are no longer needed to suppress vibrations. Instead Chris is focusing on a little thicker arms and as the resting vibrations are handled by the cutouts in the main plate. They are simply no longer needed and he decided to remove the brace so that the airflow is less obstructed. Hope that helps 😊
Hey Chris, I wonder about the vibration isolation cutout. So it is surposed to help the FC for less noise. But doesnt it have to be positioned right on that cutout? Because on the aos 3.5 you will most probably put the aio fc in front and vtx in the back. So your FC is not on that isolation cutout. The aos 3.5 then missed the design intention or am I wrong about that cutout?
So, i got my 3.5 v5 and the antenna mount isnt a snug fit on the rear standoffs. It has room to move up and down freely as well as slight wiggle room because the prints holes are larger diameter than the standoffs. Ordered from Hobby RC. The front mounted battery connecter is also a bit of a hinderance to the build overall, and it also doesnt grip the provided xt30 plug very well so it just slips out when i unplug a battery. With these issues, im also getting gentle wobble after a throttle punch, its not propwash as it happens at the peak of a climb and not on the way back down, no amount of tuning seems to fix it. I have a v1 which is absolutely flawless for me so this is a little bit frustrating. If the master himself has any recommendations id be grateful.
Hey Chris, I love what you do man and I support it by buying your frames. But why the heck is all the iterations of aos3.5 have different arms??? I own 3x of aos3.5 now(different version each) with a broken arm each and I cannot rebuild a frame from any of them. It's really annoying specially when theres not really much different from all of them(well maybe except the V1). Your frames are like disposable now, forcing people to buy the new one if you break an arm. It's really annoying! If only it's any cheaper, I would love to have arms in 5mm thickness!
Amen brother! And for disposable frames they ain't cheap. You can get replacement parts for any of them from CNC Drones in Canada, but it's £15 shipping. Might be worth it for you with 3 frames to fix, but I'm looking at adding all the spares I might never need just to make it worthwhile. Which quickly adds up... Which might tempt some to just buy the new frame instead... Until you realise there are other frames available for less than half the price. It feels like the FPV version of Apple, but worse - Next week, V5 MAX, upgrade now or be forced out!
I’m struggling to put this version together. The cutout for the XT connector gets covered by a camera mount so putting the ESC/IMU stack in the front position leaves the builder with challenges. The battery cutouts are of dubious use and the logical places for the battery strap are either too far forward or too far rearward. I’ll PM some photos of my build so far so you can see. I love these build videos! They should definitely precede the product launch.
0:09 Incredibly easy to build… until you add an o3, fc/esc. Then you need the dexterity and patience of a Swiss watch maker. A build guide including electronics for those of us with fat fingers coming from 5” quads would be ideal.
if it was 2mm longer in the body the 03 would fit and the FC would fit in the center of the cut outs as it is now the fc uses two screws in the cut out area and two by the camera. Add 2mm to the end it would all fit if you turn the FC 180 degrees or backwards or you could widen the back of the quad so 03 fits between the standoffs and make the antenna hold part of the capture or holder for it. Again about 2 mm more between the standoffs wide or 2mm long
@@luis_gbs They say that, but everytime I watch a video where they test the weight, the weight goes like 5-10g over the advertised weight. Same with the aos 3.5 evo.
Without props, mine came in at 170g, and that’s with an o3, speedy bee f405 mini stack and HQ Motor 1404 3800kV’s. With props and a CNHL 450mah pack, it would probably be just on 250g
Thank you Chris for the fantastic frame. Looks like AOS 3.5 is also an ultimate sub 250g freestyle BNF copter. There are only few decent frames on the market but yours has the biggest potential 🚀
Hi, you can get arms from cncdrones.com. They'll arrive in less than a week and postage is very reasonable. You can get any spares for AOS frames here.
It's £15 postage, so you might want to buy all the spares you might ever need, which quickly adds up... Which might tempt some to just buy a new frame instead... Until you realise it's damn near £60 and you can buy the Volador 3.5 for £25... Having this dilemma myself right now! It feels like the FPV version of Apple. Next week, V5 MAX, upgrade now or be forced out!
I managed to get a old 20x20 iflight flight controller left over. I'm running 1408 3800kv With the 03 It's nice. I still love the feel of the old arms... but I have a large amount of broken ones. So hopefully I become a better pilot and not crash as much, but when we do... it's bad. So if this new frame is stronger, I like it. Flying really nice for me. Lot's of room to build.
I have the aos hd aos v2 and the aos 03 3.5 bnf. My aos 5 I flew into a pole camera cage first. Where can I get just the camera cage? Want to upgrade to the 03 anyways. And why did my aos 3.5 come with carbon cage? I'd like to change my 3.5 out with aluminum before I do it again lol. Absolute best flying frames out there. Love your videos thankyou so muck chris
Now you are showing how it's done, but i have figured it out by myself. It's a really good frame, would be nice if you could make it a bit lighter in the V6 Version Thanks for your effort making the FPV experience better and better
Hi! The best way to mount the O3 (for best cooling and lightest weight) is to use a strip of 3M VHB foam tape on the side closest to the USB port and press it down in the rear mounting pattern on the frame. A 1"x1" square will guarentee that it won't ever come loose 👍
@@ChrisRosser I will email you a picture since i started it this pattern. Also the )3 antenna holder wobbles so bad it will definitely cause vibration The prebuilt have it bolted to half of the cut out and the flight controller up against the camera in the front. mine does fit that way just feels like the flight controller not being in the middle of the cut out means its not using it
Great timing as mine arrived this week. Assume that was a CNCDrone kit and not the iFlight version. My iFlight didn’t list any washers for the rear standoffs.
That looks like a fairly easy to service frame which is great. If I buy one I will repalce the standoffs with hexagonal standoffs because I use blue loctite and with a hexagonal standoff you can use a 5mm spanner to stop the standoff spinning when you're taking out the screws - even blue loctatie can stick hard after a few years and multiple applications. Be interested to see how it flies.
@@luis_gbs So v5 is better for stack vibration - check. How about overall performance, are they built for different use cases? Why would i choose one over the other?
@@keri-s4102 V5 is simply the next generation of frames and with Chris tried to improve the earlier ones. In my opinion, there’s no real reason not to go with them.
We shouldn't confuse "Content Creators" with "FPV Hobbyists". Content creators will do whatever gets views on YT/TikTok/Insta and you're right now they make videos about AI and in 1-2 years it'll be something else. FPV Hobbyists love the experience of flying that you get from FPV and can't get anywhere else.
Thumbs up for 4S !
“Build videos”?! 🙂 This is a great idea Chris, I’d love to see many more of these. 👍 Happy New Year 🥳
The problem is still the limited amount of 3.5" props. And many of them are t-mount, which I personally absolutely hate. Nothing worse than messing with finicky little screws on the field.
Chris, we need AOS Propellers!!! 😊
Seems you havent checked the prop market lately. Hqprop 3.5x2.8x3 and gemfan 3630 for example.
Now the issue would more be not enough 5mm prop shaft motors.
Only tmotor 1804 or most 1507 motors.
Just brought mine with mamba F740 aio and flash, firefly 2004 2950kv motors, and the best hd video system, walksnail v3 kit, i hope the frame is as durable as it looks, have always brought Geprcst3.5 and never boke one yet! ❤ the explanation and hopefully will ❤ the v5 3.5" frame as much or more, cheers Chriss
Power motors like 2205 do some resonanse vibrations at 50-100% throttle for aos35 frame with o3 unit fc mount style. Need to make pids lower to correct it. Is there any way to fix this problem?
What's the AUW on this frame with and without the TPU? Some sites say 50g and others say or 68g?
What happend to the A arms?!
The v5 doesn’t have
Not needed anymore
And saves weight
The 3.5 is heavy enough without em
I think the A design was also about eliminating vibrations, not sure
But the V5 has cut outs
I have it and it's definitely better than my Quadmula SF35 in tuning, but unfortunately around 10g heavier with same setup
They were a bit too snappy! I’m using them on my UL5 and my T3. Replacing arms is just part of using them. But I’ve never broken or bent a motor on those quads. Something has to give.
Due to the use of the new XCell technology, they are no longer needed to suppress vibrations. Instead Chris is focusing on a little thicker arms and as the resting vibrations are handled by the cutouts in the main plate. They are simply no longer needed and he decided to remove the brace so that the airflow is less obstructed. Hope that helps 😊
I’ve busted many of the arms. Concrete and drones don’t mix lol
Still hope for a lighter version of the 3.5 class, not a UL35, but sth 40g-50g
Hey Chris, I wonder about the vibration isolation cutout.
So it is surposed to help the FC for less noise.
But doesnt it have to be positioned right on that cutout?
Because on the aos 3.5 you will most probably put the aio fc in front and vtx in the back.
So your FC is not on that isolation cutout.
The aos 3.5 then missed the design intention or am I wrong about that cutout?
It's just isolating the vibration coming from the arms, which seem to be heavier in the middle part
In mine the design seems to work great
So, i got my 3.5 v5 and the antenna mount isnt a snug fit on the rear standoffs. It has room to move up and down freely as well as slight wiggle room because the prints holes are larger diameter than the standoffs. Ordered from Hobby RC. The front mounted battery connecter is also a bit of a hinderance to the build overall, and it also doesnt grip the provided xt30 plug very well so it just slips out when i unplug a battery. With these issues, im also getting gentle wobble after a throttle punch, its not propwash as it happens at the peak of a climb and not on the way back down, no amount of tuning seems to fix it. I have a v1 which is absolutely flawless for me so this is a little bit frustrating. If the master himself has any recommendations id be grateful.
Hey Chris, I love what you do man and I support it by buying your frames. But why the heck is all the iterations of aos3.5 have different arms??? I own 3x of aos3.5 now(different version each) with a broken arm each and I cannot rebuild a frame from any of them. It's really annoying specially when theres not really much different from all of them(well maybe except the V1). Your frames are like disposable now, forcing people to buy the new one if you break an arm. It's really annoying! If only it's any cheaper, I would love to have arms in 5mm thickness!
Amen brother! And for disposable frames they ain't cheap. You can get replacement parts for any of them from CNC Drones in Canada, but it's £15 shipping. Might be worth it for you with 3 frames to fix, but I'm looking at adding all the spares I might never need just to make it worthwhile. Which quickly adds up... Which might tempt some to just buy the new frame instead... Until you realise there are other frames available for less than half the price. It feels like the FPV version of Apple, but worse - Next week, V5 MAX, upgrade now or be forced out!
BEST 3.5" on the market! Cheers Bro!
Thanks for the Guide.
I still miss the part in how the x-cell works in a two stack configuration. Does it Work onky half?
Awesome! Thanks, Chris! 😊
Stay safe there with your family! 🖖😊
What motor and prop are people using on this frame?
DefianceRC's BNF is coming with Xing 1504 motors and HQ3.5*2.5 on a 4s battery, 850mAh, I think.
I loathe t mount, so I’m rocking 1804 with a 5mm shaft
liking a nice build video!!!
I’m struggling to put this version together. The cutout for the XT connector gets covered by a camera mount so putting the ESC/IMU stack in the front position leaves the builder with challenges. The battery cutouts are of dubious use and the logical places for the battery strap are either too far forward or too far rearward. I’ll PM some photos of my build so far so you can see. I love these build videos! They should definitely precede the product launch.
0:09 Incredibly easy to build… until you add an o3, fc/esc. Then you need the dexterity and patience of a Swiss watch maker.
A build guide including electronics for those of us with fat fingers coming from 5” quads would be ideal.
if it was 2mm longer in the body the 03 would fit and the FC would fit in the center of the cut outs as it is now the fc uses two screws in the cut out area and two by the camera. Add 2mm to the end it would all fit if you turn the FC 180 degrees or backwards or you could widen the back of the quad so 03 fits between the standoffs and make the antenna hold part of the capture or holder for it. Again about 2 mm more between the standoffs wide or 2mm long
What is the weight including the screw stacks and TPU for the DJI o3? Need to know the exact weight so I can design my sub250 drone.
From his website: “53g including hardware and camera cage”
@@luis_gbs They say that, but everytime I watch a video where they test the weight, the weight goes like 5-10g over the advertised weight. Same with the aos 3.5 evo.
@@QuandarNltrue
Without props, mine came in at 170g, and that’s with an o3, speedy bee f405 mini stack and HQ Motor 1404 3800kV’s. With props and a CNHL 450mah pack, it would probably be just on 250g
We gonna get some mininova motors to put this in motion?
Just got this guy built a couple days ago. Sadly the weather has been stopping me from flying it.
Thanks!
Help the frame m2x12 only gave me 5 screw and you had 6
Thank you Chris for the fantastic frame. Looks like AOS 3.5 is also an ultimate sub 250g freestyle BNF copter. There are only few decent frames on the market but yours has the biggest potential 🚀
Just thinking what my first drone will be... this must be a sign.
It is 😇
I am waiting for 4 inch AOS frame.
Please REPLY CHRISS, where are the replacement arms in uk well known stores, please dont tell me i have to spend 60£ on a new framekit
Hi, you can get arms from cncdrones.com. They'll arrive in less than a week and postage is very reasonable. You can get any spares for AOS frames here.
It's £15 postage, so you might want to buy all the spares you might ever need, which quickly adds up... Which might tempt some to just buy a new frame instead... Until you realise it's damn near £60 and you can buy the Volador 3.5 for £25... Having this dilemma myself right now! It feels like the FPV version of Apple. Next week, V5 MAX, upgrade now or be forced out!
How much wheight have this frame?
Aos says 52g and iflight says 69g. Not sure why
I bought the AOS 3.5, but no gummies?
😢😢😢WHERES THE REPLACEMENT ARMS! I LOVE THIS DRONE BUT I CANT GET ANY BLOOMING ARMS! UK
I wish there were shoulder bolts for the camera through the gummies so you couldn't mess up tightness and they could be torqued.
I managed to get a old 20x20 iflight flight controller left over.
I'm running 1408
3800kv
With the 03
It's nice. I still love the feel of the old arms... but I have a large amount of broken ones. So hopefully I become a better pilot and not crash as much, but when we do... it's bad. So if this new frame is stronger, I like it. Flying really nice for me. Lot's of room to build.
Has there been issues with the iFlight AOS5 V5 kit missing screws? Went to build mine tonight and disappointed to find out I'm missing screws. Smh
I have the aos hd aos v2 and the aos 03 3.5 bnf. My aos 5 I flew into a pole camera cage first. Where can I get just the camera cage? Want to upgrade to the 03 anyways. And why did my aos 3.5 come with carbon cage? I'd like to change my 3.5 out with aluminum before I do it again lol. Absolute best flying frames out there. Love your videos thankyou so muck chris
i got 3.5 v5 with 3k motors, can i get some good tune & rates ? thanks.. i use walksnail avatar hd pro(dual antenna) with 4s lipo
thanks.
Now you are showing how it's done, but i have figured it out by myself.
It's a really good frame, would be nice if you could make it a bit lighter in the V6 Version
Thanks for your effort making the FPV experience better and better
there is not mounting for 03 it doesn't have a cage and to bolts do appear to be in a square to screw it in?
Hi! The best way to mount the O3 (for best cooling and lightest weight) is to use a strip of 3M VHB foam tape on the side closest to the USB port and press it down in the rear mounting pattern on the frame. A 1"x1" square will guarentee that it won't ever come loose 👍
@@ChrisRosser I will email you a picture since i started it this pattern. Also the )3 antenna holder wobbles so bad it will definitely cause vibration The prebuilt have it bolted to half of the cut out and the flight controller up against the camera in the front. mine does fit that way just feels like the flight controller not being in the middle of the cut out means its not using it
Great timing as mine arrived this week. Assume that was a CNCDrone kit and not the iFlight version. My iFlight didn’t list any washers for the rear standoffs.
What’s the weight?
Think what you want. Ilove Chris. Best engeneer on planet earth.
Hey, wheres the difference between the AOS 3.5 Evo and the AOS 3.5 V5 ? I can find both online but they are never compared.
Any news on this?
That looks like a fairly easy to service frame which is great. If I buy one I will repalce the standoffs with hexagonal standoffs because I use blue loctite and with a hexagonal standoff you can use a 5mm spanner to stop the standoff spinning when you're taking out the screws - even blue loctatie can stick hard after a few years and multiple applications.
Be interested to see how it flies.
Can you explain that spanner in detail?
@@saturn_fpv British term for wench
Whats the biggest difference between v5 and v1.2?
Just look at them, their structure is completely different. The beehive has now the XCell technology and classic arms, the V1.2 has y-arms instead
@@luis_gbs So v5 is better for stack vibration - check. How about overall performance, are they built for different use cases? Why would i choose one over the other?
@@keri-s4102 V5 is simply the next generation of frames and with Chris tried to improve the earlier ones. In my opinion, there’s no real reason not to go with them.
Can I use GF 3630 props for this frame?
Did you ever find out the answer?! lol
yes, they fit
Giveaway for first comment xD
found the gummies under decals all good
Hay update ur 7 inch frame with ur new center cut out 🙏 so i can buy it
In his last video he mentioned that the AOS7 will come in the next batch☺️
how does the aos keep getting ugglier :(
:)
This hobby has cratered
Nobody watches FPV videos any more
Content creators have moved on to A.I.
We shouldn't confuse "Content Creators" with "FPV Hobbyists". Content creators will do whatever gets views on YT/TikTok/Insta and you're right now they make videos about AI and in 1-2 years it'll be something else. FPV Hobbyists love the experience of flying that you get from FPV and can't get anywhere else.