@@nuclearexplosion5841 the ball/secondary spring in the Gen 3 that VCG has is different. The spring in the Gen 3 is unik to the Gen 3. Most likely Milwaukee realised that the Gen 3 spring was shit and whent back to/ started using the type of spring shown in this video. If you have a Gen 3 and whant it to work then go to some online retailer that sells spare parts to Milwaukee tools. Get a ball spring that is meant for the M18 Surge and use that to replace to ball spring in your Gen 3. Thats what i did and the collet does not get locked in a open position now.
Thanks this worked great,I did lose one of the springs but I had an old dewalt and pulled the spring from it and did not have to do any adjustments to the spring it fit perfectly,thanks to your video I got my drill hold bits again.
You need to send this to Milwaukee, you solved a 3 year problem. Clearly the factory standards for these springs need to be more thoroughly maintained. QC is not doing a good job. I bet alot of springs come out bad to the assembly lines and that assembler does not understand hes sending out a defective tool by using bad springs.
@R-77 to Milwaukee? That sucks, I really like Milwaukee, I had a radio that lasted 20 years, my last impact lasted me 7 years of extreme abuse, I also had good results with Rigid, rigid lacked the power of dewalt, makita, and Milwaukee. I would recommend Makita if your done with Milwaukee, we used all makita in the union here on the jobsites I worked on in Chicago and the sububs. I was impressed by the power of makita, the durability too, every so often we would have a brand new makita come out of the factory defective, then a simple return solved that problem. Looks like Milwaukee needs to hire this guy so they actually fix the engineering defect.
Christopher TheCarpenter Makita makes great tools, they design impact driver collet with double ball bearing, that’s why Makita doesn’t have this kind of problem, Milwaukee designs it with just only one ball bearing, but the tools are also good.
@@yeetrue1 overall makita is great, I like much about makita, especially the power. On all of our Union jobsites we primarily used makita so that says something there. I own alot of Milwaukee tools and really like their line, its unfortunate Milwaukee does not address certain issues and go that extra step adding additional ball bearings as makita did, I would recommend that extended warranty for all tools as I have seen a few makita tools get smoked the same day after unpacked from the box. I guess its preference but at the end of the day I think it's safe to say that makita and Milwaukee are the best, I'm not a fan of black n decker dewalt, and certainly would not want to downgrade the tools to Ryobi or craftsman.
I attempted this repair but found the spring metal was extremely brittle, and broke off chunks rather than bending. Replacement parts are still available for a few dollars, though
Я так отремонтировал milwaukee 2553, друг раздолбал на стройке своего дома. У него забрал, вставил два шарика от мебельной направляющей салазки, свой шарик был утерян, кончик пружины был сломан. Без всяких пружин более эффективно работает и фиксирует биту. Два шарика)))пружина совсем не учавствует в фиксации биты в моем случае
Silicon Carbine Disc, Accompanied Laminated, Can you show me how to put this together? But I’m afraid it will be zero penetration. Quite painful I’m afraid..
you can find in your local hardware store or any store which can supply you bearing, they will always have ball bearing for sale, or you can order online from Aliexpress
This video is 100x better than the 4 videos VCG put out
I agree he had a fix work unlike vcg but Vince did try
@@nuclearexplosion5841 the ball/secondary spring in the Gen 3 that VCG has is different. The spring in the Gen 3 is unik to the Gen 3. Most likely Milwaukee realised that the Gen 3 spring was shit and whent back to/ started using the type of spring shown in this video. If you have a Gen 3 and whant it to work then go to some online retailer that sells spare parts to Milwaukee tools. Get a ball spring that is meant for the M18 Surge and use that to replace to ball spring in your Gen 3. Thats what i did and the collet does not get locked in a open position now.
I didn't know his name. I was gonna say this is a lot better than that screeming guy.
Vcg sucks
X10 😅 and I'm a fan of Vince.
Great video! Fixed the collet on my m18 impact that I bought off Ebay for cheap. Thank you very much
You the man ! Fixed better then new ! I'm gonna like !
Awesome explanation, Fixed my impact with in 2 minutes👍👍
Werner Herzog? You truly are a well-rounded filmmaker!
Thanks this worked great,I did lose one of the springs but I had an old dewalt and pulled the spring from it and did not have to do any adjustments to the spring it fit perfectly,thanks to your video I got my drill hold bits again.
You need to send this to Milwaukee, you solved a 3 year problem. Clearly the factory standards for these springs need to be more thoroughly maintained. QC is not doing a good job. I bet alot of springs come out bad to the assembly lines and that assembler does not understand hes sending out a defective tool by using bad springs.
@R-77 to Milwaukee? That sucks, I really like Milwaukee, I had a radio that lasted 20 years, my last impact lasted me 7 years of extreme abuse, I also had good results with Rigid, rigid lacked the power of dewalt, makita, and Milwaukee. I would recommend Makita if your done with Milwaukee, we used all makita in the union here on the jobsites I worked on in Chicago and the sububs. I was impressed by the power of makita, the durability too, every so often we would have a brand new makita come out of the factory defective, then a simple return solved that problem. Looks like Milwaukee needs to hire this guy so they actually fix the engineering defect.
Christopher TheCarpenter Makita makes great tools, they design impact driver collet with double ball bearing, that’s why Makita doesn’t have this kind of problem, Milwaukee designs it with just only one ball bearing, but the tools are also good.
@@yeetrue1 overall makita is great, I like much about makita, especially the power. On all of our Union jobsites we primarily used makita so that says something there. I own alot of Milwaukee tools and really like their line, its unfortunate Milwaukee does not address certain issues and go that extra step adding additional ball bearings as makita did, I would recommend that extended warranty for all tools as I have seen a few makita tools get smoked the same day after unpacked from the box. I guess its preference but at the end of the day I think it's safe to say that makita and Milwaukee are the best, I'm not a fan of black n decker dewalt, and certainly would not want to downgrade the tools to Ryobi or craftsman.
Thank you so much! This and the second part saved me from a heart attack. 🙇🏽♂️😂
Awesome and simple fix!
Thank you very much I fix my drill and thanks to you again
great video, thank you!!!
I attempted this repair but found the spring metal was extremely brittle, and broke off chunks rather than bending. Replacement parts are still available for a few dollars, though
Я так отремонтировал milwaukee 2553, друг раздолбал на стройке своего дома. У него забрал, вставил два шарика от мебельной направляющей салазки, свой шарик был утерян, кончик пружины был сломан. Без всяких пружин более эффективно работает и фиксирует биту. Два шарика)))пружина совсем не учавствует в фиксации биты в моем случае
What do you suggest…¿ two balls or remove the spring¿
Silicon Carbine Disc, Accompanied Laminated, Can you show me how to put this together? But I’m afraid it will be zero penetration. Quite painful I’m afraid..
Either the small steel sphere in the quick change collet and/or the bit shank is worn out of tolerance.
No ma...they should take back all their shit and fixit for free..period,.When i pay for a toll i expect a 100% fucntional tool...
Yes man
I saw this fix on another video and after the fix it was tested and the bit still fell out when trying to back out..fix doesn't work
The Porter Cable impact has the same issue as do Dewalt
Where can I buuy the ball bearing?
you can find in your local hardware store or any store which can supply you bearing, they will always have ball bearing for sale, or you can order online from Aliexpress
Does the M12 surge suffer the same thing?
I don’t think so, surge anvil is different
@@yeetrue1 thank you
I was told it was only m18 gen. 3. I do know none of the brushed impact drivers have the problem.
This fix is good but I can’t find myself to pay money for a defective product their company sells to the public.
Just took it back to home depot to have it exchanged. This is bs